1// SPDX-License-Identifier: (GPL-2.0+ OR MIT) 2/* 3 * at91-sama5d2_xplained.dts - Device Tree file for SAMA5D2 Xplained board 4 * 5 * Copyright (C) 2015 Atmel, 6 * 2015 Nicolas Ferre <nicolas.ferre@atmel.com> 7 */ 8/dts-v1/; 9#include "sama5d2.dtsi" 10#include "sama5d2-pinfunc.h" 11#include <dt-bindings/mfd/atmel-flexcom.h> 12#include <dt-bindings/gpio/gpio.h> 13#include <dt-bindings/input/input.h> 14#include <dt-bindings/regulator/active-semi,8945a-regulator.h> 15 16/ { 17 model = "Atmel SAMA5D2 Xplained"; 18 compatible = "atmel,sama5d2-xplained", "atmel,sama5d2", "atmel,sama5"; 19 20 aliases { 21 serial0 = &uart1; /* DBGU */ 22 i2c0 = &i2c0; 23 i2c1 = &i2c1; 24 i2c2 = &i2c2; /* XPRO EXT2 */ 25 }; 26 27 chosen { 28 stdout-path = "serial0:115200n8"; 29 }; 30 31 clocks { 32 slow_xtal { 33 clock-frequency = <32768>; 34 }; 35 36 main_xtal { 37 clock-frequency = <12000000>; 38 }; 39 }; 40 41 ahb { 42 usb0: gadget@300000 { 43 atmel,vbus-gpio = <&pioA PIN_PA31 GPIO_ACTIVE_HIGH>; 44 pinctrl-names = "default"; 45 pinctrl-0 = <&pinctrl_usba_vbus>; 46 status = "okay"; 47 }; 48 49 usb1: ohci@400000 { 50 num-ports = <3>; 51 atmel,vbus-gpio = <0 /* &pioA PIN_PB9 GPIO_ACTIVE_HIGH */ 52 &pioA PIN_PB10 GPIO_ACTIVE_HIGH 53 0 54 >; 55 pinctrl-names = "default"; 56 pinctrl-0 = <&pinctrl_usb_default>; 57 status = "okay"; 58 }; 59 60 usb2: ehci@500000 { 61 status = "okay"; 62 }; 63 64 sdmmc0: sdio-host@a0000000 { 65 bus-width = <8>; 66 pinctrl-names = "default"; 67 pinctrl-0 = <&pinctrl_sdmmc0_default>; 68 non-removable; 69 mmc-ddr-3_3v; 70 status = "okay"; 71 }; 72 73 sdmmc1: sdio-host@b0000000 { 74 bus-width = <4>; 75 pinctrl-names = "default"; 76 pinctrl-0 = <&pinctrl_sdmmc1_default>; 77 status = "okay"; /* conflict with qspi0 */ 78 vqmmc-supply = <&vdd_3v3_reg>; 79 vmmc-supply = <&vdd_3v3_reg>; 80 }; 81 82 apb { 83 qspi0: spi@f0020000 { 84 pinctrl-names = "default"; 85 pinctrl-0 = <&pinctrl_qspi0_default>; 86 status = "disabled"; /* conflict with sdmmc1 */ 87 88 flash@0 { 89 #address-cells = <1>; 90 #size-cells = <1>; 91 compatible = "jedec,spi-nor"; 92 reg = <0>; 93 spi-max-frequency = <80000000>; 94 spi-tx-bus-width = <4>; 95 spi-rx-bus-width = <4>; 96 m25p,fast-read; 97 98 at91bootstrap@0 { 99 label = "at91bootstrap"; 100 reg = <0x00000000 0x00040000>; 101 }; 102 103 bootloader@40000 { 104 label = "bootloader"; 105 reg = <0x00040000 0x000c0000>; 106 }; 107 108 bootloaderenvred@100000 { 109 label = "bootloader env redundant"; 110 reg = <0x00100000 0x00040000>; 111 }; 112 113 bootloaderenv@140000 { 114 label = "bootloader env"; 115 reg = <0x00140000 0x00040000>; 116 }; 117 118 dtb@180000 { 119 label = "device tree"; 120 reg = <0x00180000 0x00080000>; 121 }; 122 123 kernel@200000 { 124 label = "kernel"; 125 reg = <0x00200000 0x00600000>; 126 }; 127 128 misc@800000 { 129 label = "misc"; 130 reg = <0x00800000 0x00000000>; 131 }; 132 }; 133 }; 134 135 spi0: spi@f8000000 { 136 pinctrl-names = "default"; 137 pinctrl-0 = <&pinctrl_spi0_default>; 138 status = "okay"; 139 140 flash@0 { 141 compatible = "atmel,at25df321a"; 142 reg = <0>; 143 spi-max-frequency = <50000000>; 144 }; 145 }; 146 147 macb0: ethernet@f8008000 { 148 pinctrl-names = "default"; 149 pinctrl-0 = <&pinctrl_macb0_default &pinctrl_macb0_phy_irq>; 150 #address-cells = <1>; 151 #size-cells = <0>; 152 phy-mode = "rmii"; 153 status = "okay"; 154 155 ethernet-phy@1 { 156 reg = <0x1>; 157 interrupt-parent = <&pioA>; 158 interrupts = <PIN_PC9 IRQ_TYPE_LEVEL_LOW>; 159 }; 160 }; 161 162 tcb0: timer@f800c000 { 163 timer0: timer@0 { 164 compatible = "atmel,tcb-timer"; 165 reg = <0>; 166 }; 167 168 timer1: timer@1 { 169 compatible = "atmel,tcb-timer"; 170 reg = <1>; 171 }; 172 }; 173 174 uart1: serial@f8020000 { 175 pinctrl-names = "default"; 176 pinctrl-0 = <&pinctrl_uart1_default>; 177 atmel,use-dma-rx; 178 atmel,use-dma-tx; 179 status = "okay"; 180 }; 181 182 i2c0: i2c@f8028000 { 183 dmas = <0>, <0>; 184 pinctrl-names = "default", "gpio"; 185 pinctrl-0 = <&pinctrl_i2c0_default>; 186 pinctrl-1 = <&pinctrl_i2c0_gpio>; 187 sda-gpios = <&pioA PIN_PD21 GPIO_ACTIVE_HIGH>; 188 scl-gpios = <&pioA PIN_PD22 (GPIO_ACTIVE_HIGH | GPIO_OPEN_DRAIN)>; 189 i2c-sda-hold-time-ns = <350>; 190 status = "okay"; 191 192 pmic@5b { 193 compatible = "active-semi,act8945a"; 194 reg = <0x5b>; 195 active-semi,vsel-high; 196 status = "okay"; 197 198 regulators { 199 vdd_1v35_reg: REG_DCDC1 { 200 regulator-name = "VDD_1V35"; 201 regulator-min-microvolt = <1350000>; 202 regulator-max-microvolt = <1350000>; 203 regulator-allowed-modes = <ACT8945A_REGULATOR_MODE_FIXED>, 204 <ACT8945A_REGULATOR_MODE_LOWPOWER>; 205 regulator-initial-mode = <ACT8945A_REGULATOR_MODE_FIXED>; 206 regulator-always-on; 207 208 regulator-state-mem { 209 regulator-on-in-suspend; 210 regulator-suspend-min-microvolt = <1400000>; 211 regulator-suspend-max-microvolt = <1400000>; 212 regulator-changeable-in-suspend; 213 regulator-mode = <ACT8945A_REGULATOR_MODE_LOWPOWER>; 214 }; 215 }; 216 217 vdd_1v2_reg: REG_DCDC2 { 218 regulator-name = "VDD_1V2"; 219 regulator-min-microvolt = <1100000>; 220 regulator-max-microvolt = <1300000>; 221 regulator-allowed-modes = <ACT8945A_REGULATOR_MODE_FIXED>, 222 <ACT8945A_REGULATOR_MODE_LOWPOWER>; 223 regulator-initial-mode = <ACT8945A_REGULATOR_MODE_FIXED>; 224 regulator-always-on; 225 226 regulator-state-mem { 227 regulator-off-in-suspend; 228 }; 229 }; 230 231 vdd_3v3_reg: REG_DCDC3 { 232 regulator-name = "VDD_3V3"; 233 regulator-min-microvolt = <3300000>; 234 regulator-max-microvolt = <3300000>; 235 regulator-allowed-modes = <ACT8945A_REGULATOR_MODE_FIXED>, 236 <ACT8945A_REGULATOR_MODE_LOWPOWER>; 237 regulator-initial-mode = <ACT8945A_REGULATOR_MODE_FIXED>; 238 regulator-always-on; 239 240 regulator-state-mem { 241 regulator-off-in-suspend; 242 }; 243 }; 244 245 vdd_fuse_reg: REG_LDO1 { 246 regulator-name = "VDD_FUSE"; 247 regulator-min-microvolt = <2500000>; 248 regulator-max-microvolt = <2500000>; 249 regulator-allowed-modes = <ACT8945A_REGULATOR_MODE_NORMAL>, 250 <ACT8945A_REGULATOR_MODE_LOWPOWER>; 251 regulator-initial-mode = <ACT8945A_REGULATOR_MODE_NORMAL>; 252 regulator-always-on; 253 254 regulator-state-mem { 255 regulator-off-in-suspend; 256 }; 257 }; 258 259 vdd_3v3_lp_reg: REG_LDO2 { 260 regulator-name = "VDD_3V3_LP"; 261 regulator-min-microvolt = <3300000>; 262 regulator-max-microvolt = <3300000>; 263 regulator-allowed-modes = <ACT8945A_REGULATOR_MODE_NORMAL>, 264 <ACT8945A_REGULATOR_MODE_LOWPOWER>; 265 regulator-initial-mode = <ACT8945A_REGULATOR_MODE_NORMAL>; 266 regulator-always-on; 267 268 regulator-state-mem { 269 regulator-off-in-suspend; 270 }; 271 }; 272 273 vdd_led_reg: REG_LDO3 { 274 regulator-name = "VDD_LED"; 275 regulator-min-microvolt = <3300000>; 276 regulator-max-microvolt = <3300000>; 277 regulator-allowed-modes = <ACT8945A_REGULATOR_MODE_NORMAL>, 278 <ACT8945A_REGULATOR_MODE_LOWPOWER>; 279 regulator-initial-mode = <ACT8945A_REGULATOR_MODE_NORMAL>; 280 regulator-always-on; 281 282 regulator-state-mem { 283 regulator-off-in-suspend; 284 }; 285 }; 286 287 vdd_sdhc_1v8_reg: REG_LDO4 { 288 regulator-name = "VDD_SDHC_1V8"; 289 regulator-min-microvolt = <1800000>; 290 regulator-max-microvolt = <1800000>; 291 regulator-allowed-modes = <ACT8945A_REGULATOR_MODE_NORMAL>, 292 <ACT8945A_REGULATOR_MODE_LOWPOWER>; 293 regulator-initial-mode = <ACT8945A_REGULATOR_MODE_NORMAL>; 294 regulator-always-on; 295 296 regulator-state-mem { 297 regulator-off-in-suspend; 298 }; 299 }; 300 }; 301 302 charger { 303 compatible = "active-semi,act8945a-charger"; 304 pinctrl-names = "default"; 305 pinctrl-0 = <&pinctrl_charger_chglev &pinctrl_charger_lbo &pinctrl_charger_irq>; 306 interrupt-parent = <&pioA>; 307 interrupts = <PIN_PB13 IRQ_TYPE_EDGE_RISING>; 308 309 active-semi,chglev-gpios = <&pioA PIN_PA12 GPIO_ACTIVE_HIGH>; 310 active-semi,lbo-gpios = <&pioA PIN_PC8 GPIO_ACTIVE_LOW>; 311 active-semi,input-voltage-threshold-microvolt = <6600>; 312 active-semi,precondition-timeout = <40>; 313 active-semi,total-timeout = <3>; 314 status = "okay"; 315 }; 316 }; 317 }; 318 319 pwm0: pwm@f802c000 { 320 pinctrl-names = "default"; 321 pinctrl-0 = <&pinctrl_pwm0_pwm2_default>; 322 status = "disabled"; /* conflict with leds */ 323 }; 324 325 flx0: flexcom@f8034000 { 326 atmel,flexcom-mode = <ATMEL_FLEXCOM_MODE_USART>; 327 status = "disabled"; /* conflict with ISC_D2 & ISC_D3 data pins */ 328 329 uart5: serial@200 { 330 dmas = <0>, <0>; 331 pinctrl-names = "default"; 332 pinctrl-0 = <&pinctrl_flx0_default>; 333 status = "okay"; 334 }; 335 336 i2c2: i2c@600 { 337 dmas = <0>, <0>; 338 pinctrl-names = "default", "gpio"; 339 pinctrl-0 = <&pinctrl_flx0_default>; 340 pinctrl-1 = <&pinctrl_i2c2_gpio>; 341 sda-gpios = <&pioA PIN_PB28 GPIO_ACTIVE_HIGH>; 342 scl-gpios = <&pioA PIN_PB29 (GPIO_ACTIVE_HIGH | GPIO_OPEN_DRAIN)>; 343 i2c-sda-hold-time-ns = <350>; 344 i2c-analog-filter; 345 i2c-digital-filter; 346 i2c-digital-filter-width-ns = <35>; 347 status = "disabled"; /* conflict with ISC_D2 & ISC_D3 data pins */ 348 }; 349 }; 350 351 poweroff@f8048010 { 352 debounce-delay-us = <976>; 353 atmel,wakeup-rtc-timer; 354 355 input@0 { 356 reg = <0>; 357 }; 358 }; 359 360 watchdog@f8048040 { 361 status = "okay"; 362 }; 363 364 i2s0: i2s@f8050000 { 365 pinctrl-names = "default"; 366 pinctrl-0 = <&pinctrl_i2s0_default>; 367 status = "disabled"; /* conflict with can0 */ 368 }; 369 370 can0: can@f8054000 { 371 pinctrl-names = "default"; 372 pinctrl-0 = <&pinctrl_can0_default>; 373 status = "okay"; 374 }; 375 376 uart3: serial@fc008000 { 377 atmel,use-dma-rx; 378 atmel,use-dma-tx; 379 pinctrl-names = "default"; 380 pinctrl-0 = <&pinctrl_uart3_default>; 381 status = "okay"; 382 }; 383 384 flx4: flexcom@fc018000 { 385 atmel,flexcom-mode = <ATMEL_FLEXCOM_MODE_TWI>; 386 status = "okay"; 387 388 i2c6: i2c@600 { 389 dmas = <0>, <0>; 390 pinctrl-names = "default", "gpio"; 391 pinctrl-0 = <&pinctrl_flx4_default>; 392 pinctrl-1 = <&pinctrl_flx4_gpio>; 393 sda-gpios = <&pioA PIN_PD12 GPIO_ACTIVE_HIGH>; 394 scl-gpios = <&pioA PIN_PD13 (GPIO_ACTIVE_HIGH | GPIO_OPEN_DRAIN)>; 395 i2c-analog-filter; 396 i2c-digital-filter; 397 i2c-digital-filter-width-ns = <35>; 398 status = "okay"; 399 }; 400 }; 401 402 i2c1: i2c@fc028000 { 403 dmas = <0>, <0>; 404 pinctrl-names = "default", "gpio"; 405 pinctrl-0 = <&pinctrl_i2c1_default>; 406 i2c-analog-filter; 407 i2c-digital-filter; 408 i2c-digital-filter-width-ns = <35>; 409 pinctrl-1 = <&pinctrl_i2c1_gpio>; 410 sda-gpios = <&pioA PIN_PD4 GPIO_ACTIVE_HIGH>; 411 scl-gpios = <&pioA PIN_PD5 (GPIO_ACTIVE_HIGH | GPIO_OPEN_DRAIN)>; 412 status = "okay"; 413 414 eeprom@54 { 415 compatible = "atmel,24c02"; 416 reg = <0x54>; 417 pagesize = <16>; 418 }; 419 }; 420 421 adc: adc@fc030000 { 422 vddana-supply = <&vdd_3v3_lp_reg>; 423 vref-supply = <&vdd_3v3_lp_reg>; 424 pinctrl-names = "default"; 425 pinctrl-0 = <&pinctrl_adc_default &pinctrl_adtrg_default>; 426 status = "okay"; 427 }; 428 429 pinctrl@fc038000 { 430 /* 431 * There is no real pinmux for ADC, if the pin 432 * is not requested by another peripheral then 433 * the muxing is done when channel is enabled. 434 * Requesting pins for ADC is GPIO is 435 * encouraged to prevent conflicts and to 436 * disable bias in order to be in the same 437 * state when the pin is not muxed to the adc. 438 */ 439 pinctrl_adc_default: adc_default { 440 pinmux = <PIN_PD23__GPIO>; 441 bias-disable; 442 }; 443 444 pinctrl_can0_default: can0_default { 445 pinmux = <PIN_PC10__CANTX0>, 446 <PIN_PC11__CANRX0>; 447 bias-disable; 448 }; 449 450 pinctrl_can1_default: can1_default { 451 pinmux = <PIN_PC26__CANTX1>, 452 <PIN_PC27__CANRX1>; 453 bias-disable; 454 }; 455 456 /* 457 * The ADTRG pin can work on any edge type. 458 * In here it's being pulled up, so need to 459 * connect it to ground to get an edge e.g. 460 * Trigger can be configured on falling, rise 461 * or any edge, and the pull-up can be changed 462 * to pull-down or left floating according to 463 * needs. 464 */ 465 pinctrl_adtrg_default: adtrg_default { 466 pinmux = <PIN_PD31__ADTRG>; 467 bias-pull-up; 468 }; 469 470 pinctrl_charger_chglev: charger_chglev { 471 pinmux = <PIN_PA12__GPIO>; 472 bias-disable; 473 }; 474 475 pinctrl_charger_irq: charger_irq { 476 pinmux = <PIN_PB13__GPIO>; 477 bias-disable; 478 }; 479 480 pinctrl_charger_lbo: charger_lbo { 481 pinmux = <PIN_PC8__GPIO>; 482 bias-pull-up; 483 }; 484 485 pinctrl_classd_default_pfets: classd_default_pfets { 486 pinmux = <PIN_PB1__CLASSD_R0>, 487 <PIN_PB3__CLASSD_R2>; 488 bias-pull-up; 489 }; 490 491 pinctrl_classd_default_nfets: classd_default_nfets { 492 pinmux = <PIN_PB2__CLASSD_R1>, 493 <PIN_PB4__CLASSD_R3>; 494 bias-pull-down; 495 }; 496 497 pinctrl_flx0_default: flx0_default { 498 pinmux = <PIN_PB28__FLEXCOM0_IO0>, 499 <PIN_PB29__FLEXCOM0_IO1>; 500 bias-disable; 501 }; 502 503 pinctrl_flx4_default: flx4_default { 504 pinmux = <PIN_PD12__FLEXCOM4_IO0>, 505 <PIN_PD13__FLEXCOM4_IO1>; 506 bias-disable; 507 }; 508 509 pinctrl_flx4_gpio: flx4_gpio { 510 pinmux = <PIN_PD12__GPIO>, 511 <PIN_PD13__GPIO>; 512 bias-disable; 513 }; 514 515 pinctrl_i2c0_default: i2c0_default { 516 pinmux = <PIN_PD21__TWD0>, 517 <PIN_PD22__TWCK0>; 518 bias-disable; 519 }; 520 521 pinctrl_i2c0_gpio: i2c0_gpio { 522 pinmux = <PIN_PD21__GPIO>, 523 <PIN_PD22__GPIO>; 524 bias-disable; 525 }; 526 527 pinctrl_i2c1_default: i2c1_default { 528 pinmux = <PIN_PD4__TWD1>, 529 <PIN_PD5__TWCK1>; 530 bias-disable; 531 }; 532 533 pinctrl_i2c1_gpio: i2c1_gpio { 534 pinmux = <PIN_PD4__GPIO>, 535 <PIN_PD5__GPIO>; 536 bias-disable; 537 }; 538 539 pinctrl_i2c2_gpio: i2c2_gpio { 540 pinmux = <PIN_PB28__GPIO>, 541 <PIN_PB29__GPIO>; 542 bias-disable; 543 }; 544 545 pinctrl_i2s0_default: i2s0_default { 546 pinmux = <PIN_PC1__I2SC0_CK>, 547 <PIN_PC2__I2SC0_MCK>, 548 <PIN_PC3__I2SC0_WS>, 549 <PIN_PC4__I2SC0_DI0>, 550 <PIN_PC5__I2SC0_DO0>; 551 bias-disable; 552 }; 553 554 pinctrl_i2s1_default: i2s1_default { 555 pinmux = <PIN_PA15__I2SC1_CK>, 556 <PIN_PA14__I2SC1_MCK>, 557 <PIN_PA16__I2SC1_WS>, 558 <PIN_PA17__I2SC1_DI0>, 559 <PIN_PA18__I2SC1_DO0>; 560 bias-disable; 561 }; 562 563 pinctrl_key_gpio_default: key_gpio_default { 564 pinmux = <PIN_PB9__GPIO>; 565 bias-pull-up; 566 }; 567 568 pinctrl_led_gpio_default: led_gpio_default { 569 pinmux = <PIN_PB0__GPIO>, 570 <PIN_PB5__GPIO>, 571 <PIN_PB6__GPIO>; 572 bias-pull-up; 573 }; 574 575 pinctrl_macb0_default: macb0_default { 576 pinmux = <PIN_PB14__GTXCK>, 577 <PIN_PB15__GTXEN>, 578 <PIN_PB16__GRXDV>, 579 <PIN_PB17__GRXER>, 580 <PIN_PB18__GRX0>, 581 <PIN_PB19__GRX1>, 582 <PIN_PB20__GTX0>, 583 <PIN_PB21__GTX1>, 584 <PIN_PB22__GMDC>, 585 <PIN_PB23__GMDIO>; 586 bias-disable; 587 }; 588 589 pinctrl_macb0_phy_irq: macb0_phy_irq { 590 pinmux = <PIN_PC9__GPIO>; 591 bias-disable; 592 }; 593 594 pinctrl_qspi0_default: qspi0_default { 595 sck_cs { 596 pinmux = <PIN_PA22__QSPI0_SCK>, 597 <PIN_PA23__QSPI0_CS>; 598 bias-disable; 599 }; 600 601 data { 602 pinmux = <PIN_PA24__QSPI0_IO0>, 603 <PIN_PA25__QSPI0_IO1>, 604 <PIN_PA26__QSPI0_IO2>, 605 <PIN_PA27__QSPI0_IO3>; 606 bias-pull-up; 607 }; 608 }; 609 610 pinctrl_sdmmc0_default: sdmmc0_default { 611 cmd_data { 612 pinmux = <PIN_PA1__SDMMC0_CMD>, 613 <PIN_PA2__SDMMC0_DAT0>, 614 <PIN_PA3__SDMMC0_DAT1>, 615 <PIN_PA4__SDMMC0_DAT2>, 616 <PIN_PA5__SDMMC0_DAT3>, 617 <PIN_PA6__SDMMC0_DAT4>, 618 <PIN_PA7__SDMMC0_DAT5>, 619 <PIN_PA8__SDMMC0_DAT6>, 620 <PIN_PA9__SDMMC0_DAT7>; 621 bias-disable; 622 }; 623 624 ck_cd_rstn { 625 pinmux = <PIN_PA0__SDMMC0_CK>, 626 <PIN_PA10__SDMMC0_RSTN>, 627 <PIN_PA13__SDMMC0_CD>; 628 bias-disable; 629 }; 630 }; 631 632 pinctrl_sdmmc1_default: sdmmc1_default { 633 cmd_data { 634 pinmux = <PIN_PA28__SDMMC1_CMD>, 635 <PIN_PA18__SDMMC1_DAT0>, 636 <PIN_PA19__SDMMC1_DAT1>, 637 <PIN_PA20__SDMMC1_DAT2>, 638 <PIN_PA21__SDMMC1_DAT3>; 639 bias-disable; 640 }; 641 642 conf-ck_cd { 643 pinmux = <PIN_PA22__SDMMC1_CK>, 644 <PIN_PA30__SDMMC1_CD>; 645 bias-disable; 646 }; 647 }; 648 649 pinctrl_spi0_default: spi0_default { 650 pinmux = <PIN_PA14__SPI0_SPCK>, 651 <PIN_PA15__SPI0_MOSI>, 652 <PIN_PA16__SPI0_MISO>, 653 <PIN_PA17__SPI0_NPCS0>; 654 bias-disable; 655 }; 656 657 pinctrl_uart1_default: uart1_default { 658 pinmux = <PIN_PD2__URXD1>, 659 <PIN_PD3__UTXD1>; 660 bias-disable; 661 }; 662 663 pinctrl_uart3_default: uart3_default { 664 pinmux = <PIN_PB11__URXD3>, 665 <PIN_PB12__UTXD3>; 666 bias-disable; 667 }; 668 669 pinctrl_usb_default: usb_default { 670 pinmux = <PIN_PB10__GPIO>; 671 bias-disable; 672 }; 673 674 pinctrl_usba_vbus: usba_vbus { 675 pinmux = <PIN_PA31__GPIO>; 676 bias-disable; 677 }; 678 679 pinctrl_pwm0_pwm2_default: pwm0_pwm2_default { 680 pinmux = <PIN_PB5__PWMH2>, 681 <PIN_PB6__PWML2>; 682 bias-pull-up; 683 }; 684 }; 685 686 classd: classd@fc048000 { 687 pinctrl-names = "default"; 688 pinctrl-0 = <&pinctrl_classd_default_pfets &pinctrl_classd_default_nfets>; 689 atmel,pwm-type = "diff"; 690 atmel,non-overlap-time = <10>; 691 status = "okay"; 692 }; 693 694 i2s1: i2s@fc04c000 { 695 pinctrl-names = "default"; 696 pinctrl-0 = <&pinctrl_i2s1_default>; 697 status = "disabled"; /* conflict with spi0, sdmmc1 */ 698 }; 699 700 can1: can@fc050000 { 701 pinctrl-names = "default"; 702 pinctrl-0 = <&pinctrl_can1_default>; 703 status = "okay"; 704 }; 705 }; 706 }; 707 708 gpio-keys { 709 compatible = "gpio-keys"; 710 711 pinctrl-names = "default"; 712 pinctrl-0 = <&pinctrl_key_gpio_default>; 713 714 button { 715 label = "PB_USER"; 716 gpios = <&pioA PIN_PB9 GPIO_ACTIVE_LOW>; 717 linux,code = <KEY_PROG1>; 718 wakeup-source; 719 }; 720 }; 721 722 leds { 723 compatible = "gpio-leds"; 724 pinctrl-names = "default"; 725 pinctrl-0 = <&pinctrl_led_gpio_default>; 726 status = "okay"; /* conflict with pwm0 */ 727 728 led-red { 729 label = "red"; 730 gpios = <&pioA PIN_PB6 GPIO_ACTIVE_LOW>; 731 }; 732 733 734 led-green { 735 label = "green"; 736 gpios = <&pioA PIN_PB5 GPIO_ACTIVE_LOW>; 737 }; 738 739 led-blue { 740 label = "blue"; 741 gpios = <&pioA PIN_PB0 GPIO_ACTIVE_LOW>; 742 linux,default-trigger = "heartbeat"; 743 }; 744 }; 745}; 746