xref: /linux/arch/arm/boot/dts/marvell/kirkwood-ts419.dtsi (revision ae22a94997b8a03dcb3c922857c203246711f9d4) 
1// SPDX-License-Identifier: GPL-2.0+
2/*
3 * Device Tree include file for QNAP TS41X
4 *
5 * Copyright (C) 2013, Andrew Lunn <andrew@lunn.ch>
6 */
7
8/ {
9	model = "QNAP TS419 family";
10	compatible = "qnap,ts419", "marvell,kirkwood";
11
12	ocp@f1000000 {
13		pinctrl: pin-controller@10000 {
14			pinctrl-names = "default";
15
16			pmx_USB_copy_button: pmx-USB-copy-button {
17				marvell,pins = "mpp43";
18				marvell,function = "gpio";
19			};
20			pmx_reset_button: pmx-reset-button {
21				marvell,pins = "mpp37";
22				marvell,function = "gpio";
23			};
24			/*
25			 * JP1 indicates if an LCD module is installed
26			 * on the serial port (0), or if the port is used
27			 * as a console (1).
28			 */
29			pmx_jumper_jp1: pmx-jumper_jp1 {
30				marvell,pins = "mpp45";
31				marvell,function = "gpio";
32			};
33
34		};
35	};
36
37	gpio_keys {
38		compatible = "gpio-keys";
39		#address-cells = <1>;
40		#size-cells = <0>;
41		pinctrl-0 = <&pmx_reset_button &pmx_USB_copy_button>;
42		pinctrl-names = "default";
43
44		copy {
45			label = "USB Copy";
46			linux,code = <KEY_COPY>;
47			gpios = <&gpio1 11 GPIO_ACTIVE_LOW>;
48		};
49		reset {
50			label = "Reset";
51			linux,code = <KEY_RESTART>;
52			gpios = <&gpio1 5 GPIO_ACTIVE_LOW>;
53		};
54	};
55};
56
57&mdio {
58	status = "okay";
59
60	ethphy1: ethernet-phy@1 {
61		device_type = "ethernet-phy";
62                /* overwrite reg property in board file */
63	};
64};
65
66&eth1 {
67	status = "okay";
68	ethernet1-port@0 {
69		phy-handle = <&ethphy1>;
70	};
71};
72