xref: /linux/arch/arm/boot/dts/marvell/kirkwood-cloudbox.dts (revision 561add0da6d3d07c9bccb0832fb6ed5619167d26) 
1// SPDX-License-Identifier: GPL-2.0
2/dts-v1/;
3
4#include "kirkwood.dtsi"
5#include "kirkwood-6281.dtsi"
6
7/ {
8	model = "LaCie CloudBox";
9	compatible = "lacie,cloudbox", "marvell,kirkwood-88f6702", "marvell,kirkwood";
10
11	memory {
12		device_type = "memory";
13		reg = <0x00000000 0x10000000>;
14	};
15
16	chosen {
17		bootargs = "console=ttyS0,115200n8";
18		stdout-path = &uart0;
19	};
20
21	ocp@f1000000 {
22		pinctrl: pin-controller@10000 {
23			pmx_cloudbox_sata0: pmx-cloudbox-sata0 {
24				marvell,pins = "mpp15";
25				marvell,function = "sata0";
26			};
27		};
28
29		serial@12000 {
30			status = "okay";
31		};
32
33		sata@80000 {
34			pinctrl-0 = <&pmx_cloudbox_sata0>;
35			pinctrl-names = "default";
36			status = "okay";
37			nr-ports = <1>;
38		};
39
40		spi@10600 {
41			status = "okay";
42
43			flash@0 {
44				#address-cells = <1>;
45				#size-cells = <1>;
46				compatible = "mxicy,mx25l4005a", "jedec,spi-nor";
47				reg = <0>;
48				spi-max-frequency = <20000000>;
49				mode = <0>;
50
51				partition@0 {
52					reg = <0x0 0x80000>;
53					label = "u-boot";
54				};
55			};
56		};
57	};
58
59	gpio_keys {
60		compatible = "gpio-keys";
61		#address-cells = <1>;
62		#size-cells = <0>;
63
64		power {
65			label = "Power push button";
66			linux,code = <KEY_POWER>;
67			gpios = <&gpio0 16 GPIO_ACTIVE_LOW>;
68		};
69	};
70
71	gpio-leds {
72		compatible = "gpio-leds";
73
74		red-fail {
75			label = "cloudbox:red:fail";
76			gpios = <&gpio0 14 GPIO_ACTIVE_HIGH>;
77		};
78		blue-sata {
79			label = "cloudbox:blue:sata";
80			gpios = <&gpio0 15 GPIO_ACTIVE_HIGH>;
81		};
82	};
83
84	gpio_poweroff {
85		compatible = "gpio-poweroff";
86		gpios = <&gpio0 17 GPIO_ACTIVE_HIGH>;
87	};
88};
89
90&mdio {
91	status = "okay";
92
93	ethphy0: ethernet-phy@0 {
94		reg = <0>;
95	};
96};
97
98&eth0 {
99	status = "okay";
100	ethernet0-port@0 {
101		phy-handle = <&ethphy0>;
102	};
103};
104