1// SPDX-License-Identifier: GPL-2.0 2/dts-v1/; 3 4#include "dove.dtsi" 5 6/ { 7 model = "Globalscale D3Plug"; 8 compatible = "globalscale,d3plug", "marvell,dove"; 9 10 memory { 11 device_type = "memory"; 12 reg = <0x00000000 0x40000000>; 13 }; 14 15 chosen { 16 bootargs = "console=ttyS0,115200n8 earlyprintk root=/dev/mmcblk0p2 rw rootwait"; 17 }; 18 19 leds { 20 compatible = "gpio-leds"; 21 pinctrl-0 = <&pmx_gpio_0 &pmx_gpio_1 &pmx_gpio_2>; 22 pinctrl-names = "default"; 23 24 led-wlan-act { 25 label = "wlan-act"; 26 gpios = <&gpio0 0 1>; 27 }; 28 29 led-wlan-ap { 30 label = "wlan-ap"; 31 gpios = <&gpio0 1 1>; 32 }; 33 34 led-status { 35 label = "status"; 36 gpios = <&gpio0 2 1>; 37 }; 38 }; 39 40 usb_power: regulator-1 { 41 compatible = "regulator-fixed"; 42 regulator-name = "USB Power"; 43 regulator-min-microvolt = <5000000>; 44 regulator-max-microvolt = <5000000>; 45 enable-active-high; 46 regulator-always-on; 47 regulator-boot-on; 48 gpio = <&gpio0 8 0>; 49 pinctrl-0 = <&pmx_gpio_8>; 50 pinctrl-names = "default"; 51 }; 52}; 53 54&uart0 { status = "okay"; }; 55&sata0 { status = "okay"; }; 56&i2c0 { status = "okay"; }; 57 58/* Samsung M8G2F eMMC */ 59&sdio0 { 60 status = "okay"; 61 non-removable; 62 bus-width = <4>; 63}; 64 65/* Marvell SD8787 WLAN/BT */ 66&sdio1 { 67 status = "okay"; 68 non-removable; 69}; 70 71&spi0 { 72 status = "okay"; 73 74 /* spi0.0: 2M Flash Macronix MX25L1605D */ 75 flash@0 { 76 compatible = "st,m25l1605d"; 77 spi-max-frequency = <86000000>; 78 reg = <0>; 79 }; 80}; 81 82&pcie { 83 status = "okay"; 84 /* Fresco Logic USB3.0 xHCI controller */ 85 pcie@1 { 86 status = "okay"; 87 reset-gpios = <&gpio0 26 1>; 88 reset-delay-us = <20000>; 89 pinctrl-0 = <&pmx_camera_gpio>; 90 pinctrl-names = "default"; 91 }; 92 /* Mini-PCIe slot */ 93 pcie@2 { 94 status = "okay"; 95 reset-gpios = <&gpio0 25 1>; 96 }; 97}; 98