xref: /linux/arch/arm/boot/dts/marvell/armada-xp-mv78230.dtsi (revision b30d7a77c53ec04a6d94683d7680ec406b7f3ac8)
1// SPDX-License-Identifier: (GPL-2.0+ OR MIT)
2/*
3 * Device Tree Include file for Marvell Armada XP family SoC
4 *
5 * Copyright (C) 2012 Marvell
6 *
7 * Thomas Petazzoni <thomas.petazzoni@free-electrons.com>
8 *
9 * Contains definitions specific to the Armada XP MV78230 SoC that are not
10 * common to all Armada XP SoCs.
11 */
12
13#include "armada-xp.dtsi"
14
15/ {
16	model = "Marvell Armada XP MV78230 SoC";
17	compatible = "marvell,armadaxp-mv78230", "marvell,armadaxp", "marvell,armada-370-xp";
18
19	aliases {
20		gpio0 = &gpio0;
21		gpio1 = &gpio1;
22	};
23
24	cpus {
25		#address-cells = <1>;
26		#size-cells = <0>;
27		enable-method = "marvell,armada-xp-smp";
28
29		cpu@0 {
30			device_type = "cpu";
31			compatible = "marvell,sheeva-v7";
32			reg = <0>;
33			clocks = <&cpuclk 0>;
34			clock-latency = <1000000>;
35		};
36
37		cpu@1 {
38			device_type = "cpu";
39			compatible = "marvell,sheeva-v7";
40			reg = <1>;
41			clocks = <&cpuclk 1>;
42			clock-latency = <1000000>;
43		};
44	};
45
46	soc {
47		/*
48		 * MV78230 has 2 PCIe units Gen2.0: One unit can be
49		 * configured as x4 or quad x1 lanes. One unit is
50		 * x1 only.
51		 */
52		pciec: pcie@82000000 {
53			compatible = "marvell,armada-xp-pcie";
54			status = "disabled";
55			device_type = "pci";
56
57			#address-cells = <3>;
58			#size-cells = <2>;
59
60			msi-parent = <&mpic>;
61			bus-range = <0x00 0xff>;
62
63			ranges =
64			       <0x82000000 0 0x40000 MBUS_ID(0xf0, 0x01) 0x40000 0 0x00002000   /* Port 0.0 registers */
65				0x82000000 0 0x44000 MBUS_ID(0xf0, 0x01) 0x44000 0 0x00002000   /* Port 0.1 registers */
66				0x82000000 0 0x48000 MBUS_ID(0xf0, 0x01) 0x48000 0 0x00002000   /* Port 0.2 registers */
67				0x82000000 0 0x4c000 MBUS_ID(0xf0, 0x01) 0x4c000 0 0x00002000   /* Port 0.3 registers */
68				0x82000000 0 0x80000 MBUS_ID(0xf0, 0x01) 0x80000 0 0x00002000   /* Port 1.0 registers */
69				0x82000000 0x1 0       MBUS_ID(0x04, 0xe8) 0 1 0 /* Port 0.0 MEM */
70				0x81000000 0x1 0       MBUS_ID(0x04, 0xe0) 0 1 0 /* Port 0.0 IO  */
71				0x82000000 0x2 0       MBUS_ID(0x04, 0xd8) 0 1 0 /* Port 0.1 MEM */
72				0x81000000 0x2 0       MBUS_ID(0x04, 0xd0) 0 1 0 /* Port 0.1 IO  */
73				0x82000000 0x3 0       MBUS_ID(0x04, 0xb8) 0 1 0 /* Port 0.2 MEM */
74				0x81000000 0x3 0       MBUS_ID(0x04, 0xb0) 0 1 0 /* Port 0.2 IO  */
75				0x82000000 0x4 0       MBUS_ID(0x04, 0x78) 0 1 0 /* Port 0.3 MEM */
76				0x81000000 0x4 0       MBUS_ID(0x04, 0x70) 0 1 0 /* Port 0.3 IO  */
77				0x82000000 0x5 0       MBUS_ID(0x08, 0xe8) 0 1 0 /* Port 1.0 MEM */
78				0x81000000 0x5 0       MBUS_ID(0x08, 0xe0) 0 1 0 /* Port 1.0 IO  */>;
79
80			pcie1: pcie@1,0 {
81				device_type = "pci";
82				assigned-addresses = <0x82000800 0 0x40000 0 0x2000>;
83				reg = <0x0800 0 0 0 0>;
84				#address-cells = <3>;
85				#size-cells = <2>;
86				interrupt-names = "intx";
87				interrupts-extended = <&mpic 58>;
88				#interrupt-cells = <1>;
89				ranges = <0x82000000 0 0 0x82000000 0x1 0 1 0
90					  0x81000000 0 0 0x81000000 0x1 0 1 0>;
91				bus-range = <0x00 0xff>;
92				interrupt-map-mask = <0 0 0 7>;
93				interrupt-map = <0 0 0 1 &pcie1_intc 0>,
94						<0 0 0 2 &pcie1_intc 1>,
95						<0 0 0 3 &pcie1_intc 2>,
96						<0 0 0 4 &pcie1_intc 3>;
97				marvell,pcie-port = <0>;
98				marvell,pcie-lane = <0>;
99				clocks = <&gateclk 5>;
100				status = "disabled";
101
102				pcie1_intc: interrupt-controller {
103					interrupt-controller;
104					#interrupt-cells = <1>;
105				};
106			};
107
108			pcie2: pcie@2,0 {
109				device_type = "pci";
110				assigned-addresses = <0x82001000 0 0x44000 0 0x2000>;
111				reg = <0x1000 0 0 0 0>;
112				#address-cells = <3>;
113				#size-cells = <2>;
114				interrupt-names = "intx";
115				interrupts-extended = <&mpic 59>;
116				#interrupt-cells = <1>;
117				ranges = <0x82000000 0 0 0x82000000 0x2 0 1 0
118					  0x81000000 0 0 0x81000000 0x2 0 1 0>;
119				bus-range = <0x00 0xff>;
120				interrupt-map-mask = <0 0 0 7>;
121				interrupt-map = <0 0 0 1 &pcie2_intc 0>,
122						<0 0 0 2 &pcie2_intc 1>,
123						<0 0 0 3 &pcie2_intc 2>,
124						<0 0 0 4 &pcie2_intc 3>;
125				marvell,pcie-port = <0>;
126				marvell,pcie-lane = <1>;
127				clocks = <&gateclk 6>;
128				status = "disabled";
129
130				pcie2_intc: interrupt-controller {
131					interrupt-controller;
132					#interrupt-cells = <1>;
133				};
134			};
135
136			pcie3: pcie@3,0 {
137				device_type = "pci";
138				assigned-addresses = <0x82001800 0 0x48000 0 0x2000>;
139				reg = <0x1800 0 0 0 0>;
140				#address-cells = <3>;
141				#size-cells = <2>;
142				interrupt-names = "intx";
143				interrupts-extended = <&mpic 60>;
144				#interrupt-cells = <1>;
145				ranges = <0x82000000 0 0 0x82000000 0x3 0 1 0
146					  0x81000000 0 0 0x81000000 0x3 0 1 0>;
147				bus-range = <0x00 0xff>;
148				interrupt-map-mask = <0 0 0 7>;
149				interrupt-map = <0 0 0 1 &pcie3_intc 0>,
150						<0 0 0 2 &pcie3_intc 1>,
151						<0 0 0 3 &pcie3_intc 2>,
152						<0 0 0 4 &pcie3_intc 3>;
153				marvell,pcie-port = <0>;
154				marvell,pcie-lane = <2>;
155				clocks = <&gateclk 7>;
156				status = "disabled";
157
158				pcie3_intc: interrupt-controller {
159					interrupt-controller;
160					#interrupt-cells = <1>;
161				};
162			};
163
164			pcie4: pcie@4,0 {
165				device_type = "pci";
166				assigned-addresses = <0x82002000 0 0x4c000 0 0x2000>;
167				reg = <0x2000 0 0 0 0>;
168				#address-cells = <3>;
169				#size-cells = <2>;
170				interrupt-names = "intx";
171				interrupts-extended = <&mpic 61>;
172				#interrupt-cells = <1>;
173				ranges = <0x82000000 0 0 0x82000000 0x4 0 1 0
174					  0x81000000 0 0 0x81000000 0x4 0 1 0>;
175				bus-range = <0x00 0xff>;
176				interrupt-map-mask = <0 0 0 7>;
177				interrupt-map = <0 0 0 1 &pcie4_intc 0>,
178						<0 0 0 2 &pcie4_intc 1>,
179						<0 0 0 3 &pcie4_intc 2>,
180						<0 0 0 4 &pcie4_intc 3>;
181				marvell,pcie-port = <0>;
182				marvell,pcie-lane = <3>;
183				clocks = <&gateclk 8>;
184				status = "disabled";
185
186				pcie4_intc: interrupt-controller {
187					interrupt-controller;
188					#interrupt-cells = <1>;
189				};
190			};
191
192			pcie5: pcie@5,0 {
193				device_type = "pci";
194				assigned-addresses = <0x82002800 0 0x80000 0 0x2000>;
195				reg = <0x2800 0 0 0 0>;
196				#address-cells = <3>;
197				#size-cells = <2>;
198				interrupt-names = "intx";
199				interrupts-extended = <&mpic 62>;
200				#interrupt-cells = <1>;
201				ranges = <0x82000000 0 0 0x82000000 0x5 0 1 0
202					  0x81000000 0 0 0x81000000 0x5 0 1 0>;
203				bus-range = <0x00 0xff>;
204				interrupt-map-mask = <0 0 0 7>;
205				interrupt-map = <0 0 0 1 &pcie5_intc 0>,
206						<0 0 0 2 &pcie5_intc 1>,
207						<0 0 0 3 &pcie5_intc 2>,
208						<0 0 0 4 &pcie5_intc 3>;
209				marvell,pcie-port = <1>;
210				marvell,pcie-lane = <0>;
211				clocks = <&gateclk 9>;
212				status = "disabled";
213
214				pcie5_intc: interrupt-controller {
215					interrupt-controller;
216					#interrupt-cells = <1>;
217				};
218			};
219		};
220
221		internal-regs {
222			gpio0: gpio@18100 {
223				compatible = "marvell,armada-370-gpio",
224					     "marvell,orion-gpio";
225				reg = <0x18100 0x40>, <0x181c0 0x08>;
226				reg-names = "gpio", "pwm";
227				ngpios = <32>;
228				gpio-controller;
229				#gpio-cells = <2>;
230				#pwm-cells = <2>;
231				interrupt-controller;
232				#interrupt-cells = <2>;
233				interrupts = <82>, <83>, <84>, <85>;
234				clocks = <&coreclk 0>;
235			};
236
237			gpio1: gpio@18140 {
238				compatible = "marvell,armada-370-gpio",
239					     "marvell,orion-gpio";
240				reg = <0x18140 0x40>, <0x181c8 0x08>;
241				reg-names = "gpio", "pwm";
242				ngpios = <17>;
243				gpio-controller;
244				#gpio-cells = <2>;
245				#pwm-cells = <2>;
246				interrupt-controller;
247				#interrupt-cells = <2>;
248				interrupts = <87>, <88>, <89>;
249				clocks = <&coreclk 0>;
250			};
251		};
252	};
253};
254
255&pinctrl {
256	compatible = "marvell,mv78230-pinctrl";
257};
258