xref: /linux/arch/arm/boot/dts/marvell/armada-385-turris-omnia.dts (revision c532de5a67a70f8533d495f8f2aaa9a0491c3ad0) 
1// SPDX-License-Identifier: (GPL-2.0 OR MIT)
2/*
3 * Device Tree file for the Turris Omnia
4 *
5 * Copyright (C) 2016 Uwe Kleine-König <uwe@kleine-koenig.org>
6 * Copyright (C) 2016 Tomas Hlavacek <tmshlvkc@gmail.com>
7 *
8 * Schematic available at https://www.turris.cz/doc/_media/rtrom01-schema.pdf
9 */
10
11/dts-v1/;
12
13#include <dt-bindings/gpio/gpio.h>
14#include <dt-bindings/input/input.h>
15#include <dt-bindings/leds/common.h>
16#include "armada-385.dtsi"
17
18/ {
19	model = "Turris Omnia";
20	compatible = "cznic,turris-omnia", "marvell,armada385", "marvell,armada380";
21
22	chosen {
23		stdout-path = &uart0;
24	};
25
26	aliases {
27		ethernet0 = &eth0;
28		ethernet1 = &eth1;
29		ethernet2 = &eth2;
30	};
31
32	memory {
33		device_type = "memory";
34		reg = <0x00000000 0x40000000>; /* 1024 MB */
35	};
36
37	soc {
38		ranges = <MBUS_ID(0xf0, 0x01) 0 0xf1000000 0x100000
39			  MBUS_ID(0x01, 0x1d) 0 0xfff00000 0x100000
40			  MBUS_ID(0x09, 0x19) 0 0xf1100000 0x10000
41			  MBUS_ID(0x09, 0x15) 0 0xf1110000 0x10000
42			  MBUS_ID(0x0c, 0x04) 0 0xf1200000 0x100000>;
43
44		internal-regs {
45
46			/* USB part of the PCIe2/USB 2.0 port */
47			usb@58000 {
48				status = "okay";
49			};
50
51			sata@a8000 {
52				status = "okay";
53			};
54
55			sdhci@d8000 {
56				pinctrl-names = "default";
57				pinctrl-0 = <&sdhci_pins>;
58				status = "okay";
59
60				bus-width = <8>;
61				no-1-8-v;
62				non-removable;
63			};
64
65			usb3@f0000 {
66				status = "okay";
67			};
68
69			usb3@f8000 {
70				status = "okay";
71			};
72		};
73
74		pcie {
75			status = "okay";
76
77			pcie@1,0 {
78				/* Port 0, Lane 0 */
79				status = "okay";
80				slot-power-limit-milliwatt = <10000>;
81			};
82
83			pcie@2,0 {
84				/* Port 1, Lane 0 */
85				status = "okay";
86				slot-power-limit-milliwatt = <10000>;
87			};
88
89			pcie@3,0 {
90				/* Port 2, Lane 0 */
91				status = "okay";
92				slot-power-limit-milliwatt = <10000>;
93			};
94		};
95	};
96
97	sfp: sfp {
98		compatible = "sff,sfp";
99		i2c-bus = <&sfp_i2c>;
100		tx-fault-gpios = <&pcawan 0 GPIO_ACTIVE_HIGH>;
101		tx-disable-gpios = <&pcawan 1 GPIO_ACTIVE_HIGH>;
102		rate-select0-gpios = <&pcawan 2 GPIO_ACTIVE_HIGH>;
103		los-gpios = <&pcawan 3 GPIO_ACTIVE_HIGH>;
104		mod-def0-gpios = <&pcawan 4 GPIO_ACTIVE_LOW>;
105		maximum-power-milliwatt = <3000>;
106
107		/*
108		 * For now this has to be enabled at boot time by U-Boot when
109		 * a SFP module is present. Read more in the comment in the
110		 * eth2 node below.
111		 */
112		status = "disabled";
113	};
114
115	gpio-keys {
116		compatible = "gpio-keys";
117
118		front-button {
119			label = "Front Button";
120			linux,code = <KEY_VENDOR>;
121			linux,can-disable;
122			gpios = <&mcu 0 12 GPIO_ACTIVE_HIGH>;
123			/* debouncing is done by the microcontroller */
124			debounce-interval = <0>;
125		};
126	};
127
128	sound {
129		compatible = "simple-audio-card";
130		simple-audio-card,name = "SPDIF";
131		simple-audio-card,format = "i2s";
132
133		simple-audio-card,cpu {
134			sound-dai = <&audio_controller 1>;
135		};
136
137		simple-audio-card,codec {
138			sound-dai = <&spdif_out>;
139		};
140	};
141
142	spdif_out: spdif-out {
143		#sound-dai-cells = <0>;
144		compatible = "linux,spdif-dit";
145	};
146};
147
148&audio_controller {
149	/* Pin header U16, GPIO51 in SPDIFO mode */
150	pinctrl-0 = <&spdif_pins>;
151	pinctrl-names = "default";
152	spdif-mode;
153	status = "okay";
154};
155
156&bm {
157	status = "okay";
158};
159
160&bm_bppi {
161	status = "okay";
162};
163
164/* Connected to 88E6176 switch, port 6 */
165&eth0 {
166	pinctrl-names = "default";
167	pinctrl-0 = <&ge0_rgmii_pins>;
168	status = "okay";
169	phy-mode = "rgmii";
170	buffer-manager = <&bm>;
171	bm,pool-long = <0>;
172	bm,pool-short = <3>;
173
174	fixed-link {
175		speed = <1000>;
176		full-duplex;
177	};
178};
179
180/* Connected to 88E6176 switch, port 5 */
181&eth1 {
182	pinctrl-names = "default";
183	pinctrl-0 = <&ge1_rgmii_pins>;
184	status = "okay";
185	phy-mode = "rgmii";
186	buffer-manager = <&bm>;
187	bm,pool-long = <1>;
188	bm,pool-short = <3>;
189
190	fixed-link {
191		speed = <1000>;
192		full-duplex;
193	};
194};
195
196/* WAN port */
197&eth2 {
198	/*
199	 * eth2 is connected via a multiplexor to both the SFP cage and to
200	 * ethernet-phy@1. The multiplexor switches the signal to SFP cage when
201	 * a SFP module is present, as determined by the mode-def0 GPIO.
202	 *
203	 * Until kernel supports this configuration properly, in case SFP module
204	 * is present, U-Boot has to enable the sfp node above, remove phy
205	 * handle and add managed = "in-band-status" property.
206	 */
207	status = "okay";
208	phy-mode = "sgmii";
209	phy-handle = <&phy1>;
210	phys = <&comphy5 2>;
211	sfp = <&sfp>;
212	buffer-manager = <&bm>;
213	bm,pool-long = <2>;
214	bm,pool-short = <3>;
215	label = "wan";
216};
217
218&i2c0 {
219	pinctrl-names = "default";
220	pinctrl-0 = <&i2c0_pins>;
221	status = "okay";
222
223	i2cmux@70 {
224		compatible = "nxp,pca9547";
225		#address-cells = <1>;
226		#size-cells = <0>;
227		reg = <0x70>;
228
229		i2c@0 {
230			#address-cells = <1>;
231			#size-cells = <0>;
232			reg = <0>;
233
234			mcu: system-controller@2a {
235				compatible = "cznic,turris-omnia-mcu";
236				reg = <0x2a>;
237
238				pinctrl-names = "default";
239				pinctrl-0 = <&mcu_pins>;
240
241				interrupt-parent = <&gpio1>;
242				interrupts = <11 IRQ_TYPE_NONE>;
243
244				gpio-controller;
245				#gpio-cells = <3>;
246
247				interrupt-controller;
248				#interrupt-cells = <2>;
249			};
250
251			led-controller@2b {
252				compatible = "cznic,turris-omnia-leds";
253				reg = <0x2b>;
254				#address-cells = <1>;
255				#size-cells = <0>;
256				status = "okay";
257
258				/*
259				 * LEDs are controlled by MCU (STM32F0) at
260				 * address 0x2b.
261				 *
262				 * LED functions are not stable yet:
263				 * - there are 3 LEDs connected via MCU to PCIe
264				 *   ports. One of these ports supports mSATA.
265				 *   There is no mSATA nor PCIe function.
266				 *   For now we use LED_FUNCTION_WLAN, since
267				 *   in most cases users have wifi cards in
268				 *   these slots
269				 * - there are 2 LEDs dedicated for user: A and
270				 *   B. Again there is no such function defined.
271				 *   For now we use LED_FUNCTION_INDICATOR
272				 */
273
274				multi-led@0 {
275					reg = <0x0>;
276					color = <LED_COLOR_ID_RGB>;
277					function = LED_FUNCTION_INDICATOR;
278					function-enumerator = <2>;
279				};
280
281				multi-led@1 {
282					reg = <0x1>;
283					color = <LED_COLOR_ID_RGB>;
284					function = LED_FUNCTION_INDICATOR;
285					function-enumerator = <1>;
286				};
287
288				multi-led@2 {
289					reg = <0x2>;
290					color = <LED_COLOR_ID_RGB>;
291					function = LED_FUNCTION_WLAN;
292					function-enumerator = <3>;
293				};
294
295				multi-led@3 {
296					reg = <0x3>;
297					color = <LED_COLOR_ID_RGB>;
298					function = LED_FUNCTION_WLAN;
299					function-enumerator = <2>;
300				};
301
302				multi-led@4 {
303					reg = <0x4>;
304					color = <LED_COLOR_ID_RGB>;
305					function = LED_FUNCTION_WLAN;
306					function-enumerator = <1>;
307				};
308
309				multi-led@5 {
310					reg = <0x5>;
311					color = <LED_COLOR_ID_RGB>;
312					function = LED_FUNCTION_WAN;
313				};
314
315				multi-led@6 {
316					reg = <0x6>;
317					color = <LED_COLOR_ID_RGB>;
318					function = LED_FUNCTION_LAN;
319					function-enumerator = <4>;
320				};
321
322				multi-led@7 {
323					reg = <0x7>;
324					color = <LED_COLOR_ID_RGB>;
325					function = LED_FUNCTION_LAN;
326					function-enumerator = <3>;
327				};
328
329				multi-led@8 {
330					reg = <0x8>;
331					color = <LED_COLOR_ID_RGB>;
332					function = LED_FUNCTION_LAN;
333					function-enumerator = <2>;
334				};
335
336				multi-led@9 {
337					reg = <0x9>;
338					color = <LED_COLOR_ID_RGB>;
339					function = LED_FUNCTION_LAN;
340					function-enumerator = <1>;
341				};
342
343				multi-led@a {
344					reg = <0xa>;
345					color = <LED_COLOR_ID_RGB>;
346					function = LED_FUNCTION_LAN;
347					function-enumerator = <0>;
348				};
349
350				multi-led@b {
351					reg = <0xb>;
352					color = <LED_COLOR_ID_RGB>;
353					function = LED_FUNCTION_POWER;
354				};
355			};
356
357			eeprom@54 {
358				compatible = "atmel,24c64";
359				reg = <0x54>;
360
361				/* The EEPROM contains data for bootloader.
362				 * Contents:
363				 * 	struct omnia_eeprom {
364				 * 		u32 magic; (=0x0341a034 in LE)
365				 *		u32 ramsize; (in GiB)
366				 * 		char regdomain[4];
367				 * 		u32 crc32;
368				 * 	};
369				 */
370			};
371		};
372
373		i2c@1 {
374			#address-cells = <1>;
375			#size-cells = <0>;
376			reg = <1>;
377
378			/* routed to PCIe0/mSATA connector (CN7A) */
379		};
380
381		i2c@2 {
382			#address-cells = <1>;
383			#size-cells = <0>;
384			reg = <2>;
385
386			/* routed to PCIe1/USB2 connector (CN61A) */
387		};
388
389		i2c@3 {
390			#address-cells = <1>;
391			#size-cells = <0>;
392			reg = <3>;
393
394			/* routed to PCIe2 connector (CN62A) */
395		};
396
397		sfp_i2c: i2c@4 {
398			#address-cells = <1>;
399			#size-cells = <0>;
400			reg = <4>;
401
402			/* routed to SFP+ */
403		};
404
405		i2c@5 {
406			#address-cells = <1>;
407			#size-cells = <0>;
408			reg = <5>;
409
410			/* ATSHA204A-MAHDA-T crypto module */
411			crypto@64 {
412				compatible = "atmel,atsha204a";
413				reg = <0x64>;
414			};
415		};
416
417		i2c@6 {
418			#address-cells = <1>;
419			#size-cells = <0>;
420			reg = <6>;
421
422			/* exposed on pin header */
423		};
424
425		i2c@7 {
426			#address-cells = <1>;
427			#size-cells = <0>;
428			reg = <7>;
429
430			pcawan: gpio@71 {
431				/*
432				 * GPIO expander for SFP+ signals and
433				 * and phy irq
434				 */
435				compatible = "nxp,pca9538";
436				reg = <0x71>;
437
438				pinctrl-names = "default";
439				pinctrl-0 = <&pcawan_pins>;
440
441				interrupt-parent = <&gpio1>;
442				interrupts = <14 IRQ_TYPE_LEVEL_LOW>;
443
444				gpio-controller;
445				#gpio-cells = <2>;
446			};
447		};
448	};
449};
450
451&mdio {
452	pinctrl-names = "default";
453	pinctrl-0 = <&mdio_pins>;
454	status = "okay";
455
456	phy1: ethernet-phy@1 {
457		compatible = "ethernet-phy-ieee802.3-c22";
458		reg = <1>;
459		marvell,reg-init = <3 18 0 0x4985>,
460				   <3 16 0xfff0 0x0001>;
461
462		/* irq is connected to &pcawan pin 7 */
463	};
464
465	/* Switch MV88E6176 at address 0x10 */
466	ethernet-switch@10 {
467		pinctrl-names = "default";
468		pinctrl-0 = <&swint_pins>;
469		compatible = "marvell,mv88e6085";
470
471		dsa,member = <0 0>;
472		reg = <0x10>;
473
474		interrupt-parent = <&gpio1>;
475		interrupts = <13 IRQ_TYPE_LEVEL_LOW>;
476
477		ethernet-ports {
478			#address-cells = <1>;
479			#size-cells = <0>;
480
481			ethernet-port@0 {
482				reg = <0>;
483				label = "lan0";
484			};
485
486			ethernet-port@1 {
487				reg = <1>;
488				label = "lan1";
489			};
490
491			ethernet-port@2 {
492				reg = <2>;
493				label = "lan2";
494			};
495
496			ethernet-port@3 {
497				reg = <3>;
498				label = "lan3";
499			};
500
501			ethernet-port@4 {
502				reg = <4>;
503				label = "lan4";
504			};
505
506			ethernet-port@5 {
507				reg = <5>;
508				ethernet = <&eth1>;
509				phy-mode = "rgmii-id";
510
511				fixed-link {
512					speed = <1000>;
513					full-duplex;
514				};
515			};
516
517			ethernet-port@6 {
518				reg = <6>;
519				ethernet = <&eth0>;
520				phy-mode = "rgmii-id";
521
522				fixed-link {
523					speed = <1000>;
524					full-duplex;
525				};
526			};
527		};
528	};
529};
530
531&pinctrl {
532	mcu_pins: mcu-pins {
533		marvell,pins = "mpp43";
534		marvell,function = "gpio";
535	};
536
537	pcawan_pins: pcawan-pins {
538		marvell,pins = "mpp46";
539		marvell,function = "gpio";
540	};
541
542	swint_pins: swint-pins {
543		marvell,pins = "mpp45";
544		marvell,function = "gpio";
545	};
546
547	spi0cs0_pins: spi0cs0-pins {
548		marvell,pins = "mpp25";
549		marvell,function = "spi0";
550	};
551
552	spi0cs2_pins: spi0cs2-pins {
553		marvell,pins = "mpp26";
554		marvell,function = "spi0";
555	};
556};
557
558&spi0 {
559	pinctrl-names = "default";
560	pinctrl-0 = <&spi0_pins &spi0cs0_pins>;
561	status = "okay";
562
563	flash@0 {
564		compatible = "spansion,s25fl164k", "jedec,spi-nor";
565		#address-cells = <1>;
566		#size-cells = <1>;
567		reg = <0>;
568		spi-max-frequency = <40000000>;
569
570		partitions {
571			compatible = "fixed-partitions";
572			#address-cells = <1>;
573			#size-cells = <1>;
574
575			partition@0 {
576				reg = <0x0 0x00100000>;
577				label = "U-Boot";
578			};
579
580			partition@100000 {
581				reg = <0x00100000 0x00700000>;
582				label = "Rescue system";
583			};
584		};
585	};
586
587	/* MISO, MOSI, SCLK and CS2 are routed to pin header CN11 */
588};
589
590&uart0 {
591	/* Pin header CN10 */
592	pinctrl-names = "default";
593	pinctrl-0 = <&uart0_pins>;
594	status = "okay";
595};
596
597&uart1 {
598	/* Pin header CN11 */
599	pinctrl-names = "default";
600	pinctrl-0 = <&uart1_pins>;
601	status = "okay";
602};
603