1// SPDX-License-Identifier: GPL-2.0-or-later OR MIT 2/* 3 * Copyright 2018 Luxul Inc. 4 */ 5 6/dts-v1/; 7 8#include "bcm47094.dtsi" 9 10/ { 11 compatible = "luxul,xap-1610-v1", "brcm,bcm47094", "brcm,bcm4708"; 12 model = "Luxul XAP-1610 V1"; 13 14 chosen { 15 bootargs = "earlycon"; 16 }; 17 18 memory@0 { 19 device_type = "memory"; 20 reg = <0x00000000 0x08000000>; 21 }; 22 23 nvram@1eff0000 { 24 compatible = "brcm,nvram"; 25 reg = <0x1eff0000 0x10000>; 26 27 et0macaddr: et0macaddr { 28 }; 29 }; 30 31 leds { 32 compatible = "gpio-leds"; 33 34 led-status { 35 label = "bcm53xx:green:status"; 36 gpios = <&chipcommon 0 GPIO_ACTIVE_LOW>; 37 linux,default-trigger = "timer"; 38 }; 39 40 led-2ghz { 41 label = "bcm53xx:blue:2ghz"; 42 gpios = <&chipcommon 13 GPIO_ACTIVE_LOW>; 43 }; 44 45 led-5ghz { 46 label = "bcm53xx:blue:5ghz"; 47 gpios = <&chipcommon 14 GPIO_ACTIVE_LOW>; 48 }; 49 }; 50 51 gpio-keys { 52 compatible = "gpio-keys"; 53 54 button-restart { 55 label = "Reset"; 56 linux,code = <KEY_RESTART>; 57 gpios = <&chipcommon 17 GPIO_ACTIVE_LOW>; 58 }; 59 }; 60}; 61 62&gmac0 { 63 nvmem-cells = <&et0macaddr>; 64 nvmem-cell-names = "mac-address"; 65}; 66 67 68&pcie0 { 69 #address-cells = <3>; 70 #size-cells = <2>; 71 72 bridge@0,0 { 73 reg = <0x0000 0 0 0 0>; 74 75 #address-cells = <3>; 76 #size-cells = <2>; 77 78 wifi@0,0 { 79 compatible = "brcm,bcm4366-fmac", "brcm,bcm4329-fmac"; 80 reg = <0x0000 0 0 0 0>; 81 brcm,ccode-map = "AU-AU-920", "CA-CA-892", "GB-DE-964", "NZ-AU-920", "US-US-825"; 82 }; 83 }; 84}; 85 86&pcie1 { 87 #address-cells = <3>; 88 #size-cells = <2>; 89 90 bridge@0,0 { 91 reg = <0x0000 0 0 0 0>; 92 93 #address-cells = <3>; 94 #size-cells = <2>; 95 96 wifi@0,0 { 97 compatible = "brcm,bcm4366-fmac", "brcm,bcm4329-fmac"; 98 reg = <0x0000 0 0 0 0>; 99 brcm,ccode-map = "AU-AU-920", "CA-CA-892", "GB-DE-964", "NZ-AU-920", "US-US-825"; 100 }; 101 }; 102}; 103 104&spi_nor { 105 status = "okay"; 106}; 107 108&srab { 109 status = "okay"; 110 111 ports { 112 port@0 { 113 label = "poe"; 114 }; 115 116 port@1 { 117 label = "lan"; 118 }; 119 120 port@5 { 121 label = "cpu"; 122 }; 123 }; 124}; 125