xref: /linux/arch/arm/boot/dts/broadcom/bcm47094-linksys-panamera.dts (revision c532de5a67a70f8533d495f8f2aaa9a0491c3ad0) 
1// SPDX-License-Identifier: GPL-2.0-or-later OR MIT
2/*
3 * Copyright (C) 2017 Rafał Miłecki <rafal@milecki.pl>
4 */
5
6/dts-v1/;
7
8#include "bcm47094.dtsi"
9#include "bcm5301x-nand-cs0-bch8.dtsi"
10
11/ {
12	compatible = "linksys,panamera", "brcm,bcm47094", "brcm,bcm4708";
13	model = "Linksys EA9500";
14
15	chosen {
16		bootargs = "console=ttyS0,115200";
17	};
18
19	memory@0 {
20		device_type = "memory";
21		reg = <0x00000000 0x08000000>,
22		      <0x88000000 0x08000000>;
23	};
24
25	nvram@1c080000 {
26		compatible = "brcm,nvram";
27		reg = <0x1c080000 0x100000>;
28	};
29
30	gpio-keys {
31		compatible = "gpio-keys";
32
33		button-wps {
34			label = "WPS";
35			linux,code = <KEY_WPS_BUTTON>;
36			gpios = <&chipcommon 3 GPIO_ACTIVE_LOW>;
37		};
38
39		button-rfkill {
40				label = "WiFi";
41				linux,code = <KEY_RFKILL>;
42				gpios = <&chipcommon 16 GPIO_ACTIVE_LOW>;
43		};
44
45		button-reset {
46				label = "Reset";
47				linux,code = <KEY_RESTART>;
48				gpios = <&chipcommon 17 GPIO_ACTIVE_LOW>;
49		};
50	};
51
52	leds {
53		compatible = "gpio-leds";
54
55		led-wps {
56			label = "bcm53xx:white:wps";
57			gpios = <&chipcommon 22 GPIO_ACTIVE_LOW>;
58		};
59
60		led-usb2 {
61			label = "bcm53xx:green:usb2";
62			gpios = <&chipcommon 1 GPIO_ACTIVE_LOW>;
63			trigger-sources = <&ohci_port2>, <&ehci_port2>;
64			linux,default-trigger = "usbport";
65		};
66
67		led-usb3 {
68			label = "bcm53xx:green:usb3";
69			gpios = <&chipcommon 2 GPIO_ACTIVE_LOW>;
70			trigger-sources = <&ohci_port1>, <&ehci_port1>,
71					  <&xhci_port1>;
72			linux,default-trigger = "usbport";
73		};
74
75		led-power {
76			label = "bcm53xx:white:power";
77			gpios = <&chipcommon 4 GPIO_ACTIVE_HIGH>;
78			linux,default-trigger = "default-on";
79		};
80
81		led-wifi-disabled {
82			label = "bcm53xx:amber:wifi-disabled";
83			gpios = <&chipcommon 0 GPIO_ACTIVE_LOW>;
84		};
85
86		led-wifi-enabled {
87			label = "bcm53xx:white:wifi-enabled";
88			gpios = <&chipcommon 5 GPIO_ACTIVE_HIGH>;
89		};
90
91		led-bluebar1 {
92			label = "bcm53xx:white:bluebar1";
93			gpios = <&chipcommon 11 GPIO_ACTIVE_HIGH>;
94		};
95
96		led-bluebar2 {
97			label = "bcm53xx:white:bluebar2";
98			gpios = <&chipcommon 12 GPIO_ACTIVE_HIGH>;
99		};
100
101		led-bluebar3 {
102			label = "bcm53xx:white:bluebar3";
103			gpios = <&chipcommon 15 GPIO_ACTIVE_LOW>;
104		};
105
106		led-bluebar4 {
107			label = "bcm53xx:white:bluebar4";
108			gpios = <&chipcommon 18 GPIO_ACTIVE_HIGH>;
109		};
110
111		led-bluebar5 {
112			label = "bcm53xx:white:bluebar5";
113			gpios = <&chipcommon 19 GPIO_ACTIVE_HIGH>;
114		};
115
116		led-bluebar6 {
117			label = "bcm53xx:white:bluebar6";
118			gpios = <&chipcommon 20 GPIO_ACTIVE_HIGH>;
119		};
120
121		led-bluebar7 {
122			label = "bcm53xx:white:bluebar7";
123			gpios = <&chipcommon 21 GPIO_ACTIVE_HIGH>;
124		};
125
126		led-bluebar8 {
127			label = "bcm53xx:white:bluebar8";
128			gpios = <&chipcommon 8 GPIO_ACTIVE_HIGH>;
129		};
130	};
131
132	mdio-mux@18003000 {
133
134		/* BIT(9) = 1 => external mdio */
135		mdio@200 {
136			reg = <0x200>;
137			#address-cells = <1>;
138			#size-cells = <0>;
139
140			switch@0  {
141				compatible = "brcm,bcm53125";
142				#address-cells = <1>;
143				#size-cells = <0>;
144				reset-gpios = <&chipcommon 10 GPIO_ACTIVE_LOW>;
145				reset-names = "robo_reset";
146				reg = <0>;
147				dsa,member = <1 0>;
148				pinctrl-names = "default";
149				pinctrl-0 = <&pinmux_mdio>;
150
151				ports {
152					#address-cells = <1>;
153					#size-cells = <0>;
154
155					port@0 {
156						reg = <0>;
157						label = "lan1";
158					};
159
160					port@1 {
161						reg = <1>;
162						label = "lan5";
163					};
164
165					port@2 {
166						reg = <2>;
167						label = "lan2";
168					};
169
170					port@3 {
171						reg = <3>;
172						label = "lan6";
173					};
174
175					port@4 {
176						reg = <4>;
177						label = "lan3";
178					};
179
180					sw1_p8: port@8 {
181						reg = <8>;
182						ethernet = <&sw0_p0>;
183						label = "cpu";
184
185						fixed-link {
186							speed = <1000>;
187							full-duplex;
188						};
189					};
190				};
191			};
192		};
193	};
194};
195
196&usb2 {
197	vcc-gpio = <&chipcommon 13 GPIO_ACTIVE_HIGH>;
198};
199
200&usb3 {
201	vcc-gpio = <&chipcommon 14 GPIO_ACTIVE_HIGH>;
202};
203
204&srab {
205	compatible = "brcm,bcm53012-srab", "brcm,bcm5301x-srab";
206	status = "okay";
207	dsa,member = <0 0>;
208
209	ports {
210		sw0_p0: port@0 {
211			label = "extsw";
212
213			fixed-link {
214				speed = <1000>;
215				full-duplex;
216			};
217		};
218
219		port@1 {
220			label = "lan7";
221		};
222
223		port@2 {
224			label = "lan4";
225		};
226
227		port@3 {
228			label = "lan8";
229		};
230
231		port@4 {
232			label = "wan";
233		};
234
235		port@5 {
236			label = "cpu";
237			status = "disabled";
238
239			fixed-link {
240				speed = <1000>;
241				full-duplex;
242			};
243		};
244
245		port@7 {
246			label = "cpu";
247			status = "disabled";
248
249			fixed-link {
250				speed = <1000>;
251				full-duplex;
252			};
253		};
254
255		port@8 {
256			label = "cpu";
257		};
258	};
259};
260
261&usb3_phy {
262	status = "okay";
263};
264
265&nandcs {
266	partitions {
267		compatible = "linksys,ns-partitions";
268		#address-cells = <1>;
269		#size-cells = <1>;
270
271		partition@0 {
272			label = "boot";
273			reg = <0x0000000 0x0080000>;
274			read-only;
275		};
276
277		partition@80000 {
278			label = "nvram";
279			reg = <0x080000 0x0100000>;
280		};
281
282		partition@180000 {
283			label = "devinfo";
284			reg = <0x0180000 0x080000>;
285		};
286
287		partition@200000 {
288			reg = <0x0200000 0x01d00000>;
289			compatible = "linksys,ns-firmware", "brcm,trx";
290		};
291
292		partition@1f00000 {
293			reg = <0x01f00000 0x01d00000>;
294			compatible = "linksys,ns-firmware", "brcm,trx";
295		};
296
297		partition@5200000 {
298			label = "system";
299			reg = <0x05200000 0x02e00000>;
300		};
301	};
302};
303