xref: /linux/arch/arm/boot/dts/broadcom/bcm47094-asus-rt-ac5300.dts (revision daa2be74b1b2302004945b2a5e32424e177cc7da) 
1// SPDX-License-Identifier: GPL-2.0-or-later OR MIT
2/*
3 * Author: Tom Brautaset <tbrautaset@gmail.com>
4 */
5
6/dts-v1/;
7
8#include "bcm47094.dtsi"
9#include "bcm5301x-nand-cs0-bch8.dtsi"
10
11#include <dt-bindings/leds/common.h>
12
13/ {
14	compatible = "asus,rt-ac5300", "brcm,bcm47094", "brcm,bcm4708";
15	model = "ASUS RT-AC5300";
16
17	memory@0 {
18		reg = <0x00000000 0x08000000>,
19		      <0x88000000 0x18000000>;
20		device_type = "memory";
21	};
22
23	nvram@1c080000 {
24		compatible = "brcm,nvram";
25		reg = <0x1c080000 0x00180000>;
26
27		et1macaddr: et1macaddr {
28			#nvmem-cell-cells = <1>;
29		};
30	};
31
32	gpio-keys {
33		compatible = "gpio-keys";
34
35		button-reset {
36			label = "Reset";
37			linux,code = <KEY_RESTART>;
38			gpios = <&chipcommon 11 GPIO_ACTIVE_LOW>;
39		};
40
41		button-wifi {
42			label = "Wi-Fi";
43			linux,code = <KEY_RFKILL>;
44			gpios = <&chipcommon 20 GPIO_ACTIVE_LOW>;
45		};
46
47		button-wps {
48			label = "WPS";
49			linux,code = <KEY_WPS_BUTTON>;
50			gpios = <&chipcommon 18 GPIO_ACTIVE_LOW>;
51		};
52	};
53
54	leds {
55		compatible = "gpio-leds";
56
57		led-lan {
58			color = <LED_COLOR_ID_WHITE>;
59			function = LED_FUNCTION_LAN;
60			gpios = <&chipcommon 21 GPIO_ACTIVE_LOW>;
61		};
62
63		led-power {
64			color = <LED_COLOR_ID_WHITE>;
65			function = LED_FUNCTION_POWER;
66			gpios = <&chipcommon 3 GPIO_ACTIVE_LOW>;
67			linux,default-trigger = "default-on";
68		};
69
70		led-wan-red {
71			color = <LED_COLOR_ID_RED>;
72			function = LED_FUNCTION_WAN;
73			gpios = <&chipcommon 5 GPIO_ACTIVE_HIGH>;
74		};
75
76		led-wps {
77			color = <LED_COLOR_ID_WHITE>;
78			function = LED_FUNCTION_WPS;
79			gpios = <&chipcommon 19 GPIO_ACTIVE_LOW>;
80		};
81	};
82};
83
84&gmac0 {
85	nvmem-cells = <&et1macaddr 0>;
86	nvmem-cell-names = "mac-address";
87};
88
89&gmac1 {
90	nvmem-cells = <&et1macaddr 1>;
91	nvmem-cell-names = "mac-address";
92};
93
94&gmac2 {
95	nvmem-cells = <&et1macaddr 2>;
96	nvmem-cell-names = "mac-address";
97};
98
99&nandcs {
100	partitions {
101		compatible = "fixed-partitions";
102		#address-cells = <1>;
103		#size-cells = <1>;
104
105		partition@0 {
106			reg = <0x00000000 0x00080000>;
107			label = "boot";
108			read-only;
109		};
110
111		partition@80000 {
112			reg = <0x00080000 0x00180000>;
113			label = "nvram";
114		};
115
116		partition@200000 {
117			compatible = "brcm,trx";
118			reg = <0x00200000 0x07e00000>;
119			label = "firmware";
120		};
121	};
122};
123
124&srab {
125	status = "okay";
126
127	ports {
128		port@0 {
129			label = "lan4";
130		};
131
132		port@1 {
133			label = "lan3";
134		};
135
136		port@2 {
137			label = "lan2";
138		};
139
140		port@3 {
141			label = "lan1";
142		};
143
144		port@4 {
145			label = "wan";
146		};
147	};
148};
149
150&usb2 {
151	vcc-gpio = <&chipcommon 9 GPIO_ACTIVE_HIGH>;
152};
153
154&usb3_phy {
155	status = "okay";
156};
157