1// SPDX-License-Identifier: GPL-2.0-or-later OR MIT 2/* 3 * Author: Tom Brautaset <tbrautaset@gmail.com> 4 */ 5 6/dts-v1/; 7 8#include "bcm4709.dtsi" 9#include "bcm5301x-nand-cs0-bch8.dtsi" 10 11#include <dt-bindings/leds/common.h> 12 13/ { 14 compatible = "asus,rt-ac3200", "brcm,bcm4709", "brcm,bcm4708"; 15 model = "ASUS RT-AC3200"; 16 17 memory@0 { 18 reg = <0x00000000 0x08000000>, 19 <0x88000000 0x08000000>; 20 device_type = "memory"; 21 }; 22 23 nvram@1c080000 { 24 compatible = "brcm,nvram"; 25 reg = <0x1c080000 0x00180000>; 26 27 et0macaddr: et0macaddr { 28 #nvmem-cell-cells = <1>; 29 }; 30 }; 31 32 gpio-keys { 33 compatible = "gpio-keys"; 34 35 button-reset { 36 label = "Reset"; 37 linux,code = <KEY_RESTART>; 38 gpios = <&chipcommon 11 GPIO_ACTIVE_LOW>; 39 }; 40 41 button-wifi { 42 label = "Wi-Fi"; 43 linux,code = <KEY_RFKILL>; 44 gpios = <&chipcommon 4 GPIO_ACTIVE_LOW>; 45 }; 46 47 button-wps { 48 label = "WPS"; 49 linux,code = <KEY_WPS_BUTTON>; 50 gpios = <&chipcommon 7 GPIO_ACTIVE_LOW>; 51 }; 52 }; 53 54 leds { 55 compatible = "gpio-leds"; 56 57 led-power { 58 color = <LED_COLOR_ID_WHITE>; 59 function = LED_FUNCTION_POWER; 60 gpios = <&chipcommon 3 GPIO_ACTIVE_LOW>; 61 linux,default-trigger = "default-on"; 62 }; 63 64 led-wan-red { 65 color = <LED_COLOR_ID_RED>; 66 function = LED_FUNCTION_WAN; 67 gpios = <&chipcommon 5 GPIO_ACTIVE_HIGH>; 68 }; 69 70 led-wps { 71 color = <LED_COLOR_ID_WHITE>; 72 function = LED_FUNCTION_WPS; 73 gpios = <&chipcommon 14 GPIO_ACTIVE_LOW>; 74 }; 75 }; 76}; 77 78&gmac0 { 79 nvmem-cells = <&et0macaddr 0>; 80 nvmem-cell-names = "mac-address"; 81}; 82 83&gmac1 { 84 nvmem-cells = <&et0macaddr 1>; 85 nvmem-cell-names = "mac-address"; 86}; 87 88&gmac2 { 89 nvmem-cells = <&et0macaddr 2>; 90 nvmem-cell-names = "mac-address"; 91}; 92 93&nandcs { 94 partitions { 95 compatible = "fixed-partitions"; 96 #address-cells = <1>; 97 #size-cells = <1>; 98 99 partition@0 { 100 reg = <0x00000000 0x00080000>; 101 label = "boot"; 102 read-only; 103 }; 104 105 partition@80000 { 106 reg = <0x00080000 0x00180000>; 107 label = "nvram"; 108 }; 109 110 partition@200000 { 111 compatible = "brcm,trx"; 112 reg = <0x00200000 0x07e00000>; 113 label = "firmware"; 114 }; 115 }; 116}; 117 118&srab { 119 status = "okay"; 120 121 ports { 122 port@0 { 123 label = "wan"; 124 }; 125 126 port@1 { 127 label = "lan1"; 128 }; 129 130 port@2 { 131 label = "lan2"; 132 }; 133 134 port@3 { 135 label = "lan3"; 136 }; 137 138 port@4 { 139 label = "lan4"; 140 }; 141 }; 142}; 143 144&usb2 { 145 vcc-gpio = <&chipcommon 9 GPIO_ACTIVE_HIGH>; 146}; 147 148&usb3_phy { 149 status = "okay"; 150}; 151