xref: /linux/arch/arm/boot/dts/aspeed/aspeed-bmc-facebook-wedge400.dts (revision 2b0cfa6e49566c8fa6759734cf821aa6e8271a9e) 
1// SPDX-License-Identifier: GPL-2.0+
2// Copyright (c) 2019 Facebook Inc.
3/dts-v1/;
4
5#include <dt-bindings/gpio/aspeed-gpio.h>
6#include "ast2500-facebook-netbmc-common.dtsi"
7
8/ {
9	model = "Facebook Wedge 400 BMC";
10	compatible = "facebook,wedge400-bmc", "aspeed,ast2500";
11
12	aliases {
13		/*
14		 * PCA9548 (2-0070) provides 8 channels connecting to
15		 * SCM (System Controller Module).
16		 */
17		i2c16 = &imux16;
18		i2c17 = &imux17;
19		i2c18 = &imux18;
20		i2c19 = &imux19;
21		i2c20 = &imux20;
22		i2c21 = &imux21;
23		i2c22 = &imux22;
24		i2c23 = &imux23;
25
26		/*
27		 * PCA9548 (8-0070) provides 8 channels connecting to
28		 * SMB (Switch Main Board).
29		 */
30		i2c24 = &imux24;
31		i2c25 = &imux25;
32		i2c26 = &imux26;
33		i2c27 = &imux27;
34		i2c28 = &imux28;
35		i2c29 = &imux29;
36		i2c30 = &imux30;
37		i2c31 = &imux31;
38
39		/*
40		 * PCA9548 (11-0076) provides 8 channels connecting to
41		 * FCM (Fan Controller Module).
42		 */
43		i2c32 = &imux32;
44		i2c33 = &imux33;
45		i2c34 = &imux34;
46		i2c35 = &imux35;
47		i2c36 = &imux36;
48		i2c37 = &imux37;
49		i2c38 = &imux38;
50		i2c39 = &imux39;
51
52		spi2 = &spi_gpio;
53	};
54
55	chosen {
56		stdout-path = &uart1;
57		bootargs = "console=ttyS0,9600n8 root=/dev/ram rw";
58	};
59
60	ast-adc-hwmon {
61		compatible = "iio-hwmon";
62		io-channels = <&adc 0>, <&adc 1>, <&adc 2>, <&adc 3>, <&adc 4>,
63			      <&adc 5>, <&adc 6>, <&adc 7>, <&adc 8>;
64	};
65
66	/*
67	 * GPIO-based SPI Master is required to access SPI TPM, because
68	 * full-duplex SPI transactions are not supported by ASPEED SPI
69	 * Controllers.
70	 */
71	spi_gpio: spi {
72		status = "okay";
73		compatible = "spi-gpio";
74		#address-cells = <1>;
75		#size-cells = <0>;
76
77		cs-gpios = <&gpio ASPEED_GPIO(R, 2) GPIO_ACTIVE_LOW>;
78		gpio-sck = <&gpio ASPEED_GPIO(R, 3) GPIO_ACTIVE_HIGH>;
79		gpio-mosi = <&gpio ASPEED_GPIO(R, 4) GPIO_ACTIVE_HIGH>;
80		gpio-miso = <&gpio ASPEED_GPIO(R, 5) GPIO_ACTIVE_HIGH>;
81		num-chipselects = <1>;
82
83		tpm@0 {
84			compatible = "infineon,slb9670", "tcg,tpm_tis-spi";
85			spi-max-frequency = <33000000>;
86			reg = <0>;
87		};
88	};
89};
90
91/*
92 * Both firmware flashes are 128MB on Wedge400 BMC.
93 */
94&fmc_flash0 {
95#include "facebook-bmc-flash-layout-128.dtsi"
96};
97
98&fmc_flash1 {
99	partitions {
100		compatible = "fixed-partitions";
101		#address-cells = <1>;
102		#size-cells = <1>;
103
104		flash1@0 {
105			reg = <0x0 0x8000000>;
106			label = "flash1";
107		};
108	};
109};
110
111&uart2 {
112	status = "okay";
113	pinctrl-names = "default";
114	pinctrl-0 = <&pinctrl_txd2_default
115		     &pinctrl_rxd2_default>;
116};
117
118&uart4 {
119	status = "okay";
120	pinctrl-names = "default";
121	pinctrl-0 = <&pinctrl_txd4_default
122		     &pinctrl_rxd4_default>;
123};
124
125/*
126 * I2C bus #0 is multi-master environment dedicated for BMC and Bridge IC
127 * communication.
128 */
129&i2c0 {
130	status = "okay";
131	multi-master;
132	bus-frequency = <1000000>;
133};
134
135&i2c1 {
136	status = "okay";
137};
138
139&i2c2 {
140	status = "okay";
141
142	i2c-mux@70 {
143		compatible = "nxp,pca9548";
144		#address-cells = <1>;
145		#size-cells = <0>;
146		reg = <0x70>;
147		i2c-mux-idle-disconnect;
148
149		imux16: i2c@0 {
150			#address-cells = <1>;
151			#size-cells = <0>;
152			reg = <0>;
153		};
154
155		imux17: i2c@1 {
156			#address-cells = <1>;
157			#size-cells = <0>;
158			reg = <1>;
159		};
160
161		imux18: i2c@2 {
162			#address-cells = <1>;
163			#size-cells = <0>;
164			reg = <2>;
165		};
166
167		imux19: i2c@3 {
168			#address-cells = <1>;
169			#size-cells = <0>;
170			reg = <3>;
171		};
172
173		imux20: i2c@4 {
174			#address-cells = <1>;
175			#size-cells = <0>;
176			reg = <4>;
177		};
178
179		imux21: i2c@5 {
180			#address-cells = <1>;
181			#size-cells = <0>;
182			reg = <5>;
183		};
184
185		imux22: i2c@6 {
186			#address-cells = <1>;
187			#size-cells = <0>;
188			reg = <6>;
189		};
190
191		imux23: i2c@7 {
192			#address-cells = <1>;
193			#size-cells = <0>;
194			reg = <7>;
195		};
196	};
197};
198
199&i2c3 {
200	status = "okay";
201};
202
203&i2c4 {
204	status = "okay";
205};
206
207&i2c5 {
208	status = "okay";
209};
210
211&i2c6 {
212	status = "okay";
213};
214
215&i2c7 {
216	status = "okay";
217};
218
219&i2c8 {
220	status = "okay";
221
222	i2c-mux@70 {
223		compatible = "nxp,pca9548";
224		#address-cells = <1>;
225		#size-cells = <0>;
226		reg = <0x70>;
227		i2c-mux-idle-disconnect;
228
229		imux24: i2c@0 {
230			#address-cells = <1>;
231			#size-cells = <0>;
232			reg = <0>;
233		};
234
235		imux25: i2c@1 {
236			#address-cells = <1>;
237			#size-cells = <0>;
238			reg = <1>;
239		};
240
241		imux26: i2c@2 {
242			#address-cells = <1>;
243			#size-cells = <0>;
244			reg = <2>;
245		};
246
247		imux27: i2c@3 {
248			#address-cells = <1>;
249			#size-cells = <0>;
250			reg = <3>;
251		};
252
253		imux28: i2c@4 {
254			#address-cells = <1>;
255			#size-cells = <0>;
256			reg = <4>;
257		};
258
259		imux29: i2c@5 {
260			#address-cells = <1>;
261			#size-cells = <0>;
262			reg = <5>;
263		};
264
265		imux30: i2c@6 {
266			#address-cells = <1>;
267			#size-cells = <0>;
268			reg = <6>;
269		};
270
271		imux31: i2c@7 {
272			#address-cells = <1>;
273			#size-cells = <0>;
274			reg = <7>;
275		};
276
277	};
278};
279
280&i2c9 {
281	status = "okay";
282};
283
284&i2c10 {
285	status = "okay";
286};
287
288&i2c11 {
289	status = "okay";
290
291	i2c-mux@76 {
292		compatible = "nxp,pca9548";
293		#address-cells = <1>;
294		#size-cells = <0>;
295		reg = <0x76>;
296		i2c-mux-idle-disconnect;
297
298		imux32: i2c@0 {
299			#address-cells = <1>;
300			#size-cells = <0>;
301			reg = <0>;
302		};
303
304		imux33: i2c@1 {
305			#address-cells = <1>;
306			#size-cells = <0>;
307			reg = <1>;
308		};
309
310		imux34: i2c@2 {
311			#address-cells = <1>;
312			#size-cells = <0>;
313			reg = <2>;
314		};
315
316		imux35: i2c@3 {
317			#address-cells = <1>;
318			#size-cells = <0>;
319			reg = <3>;
320		};
321
322		imux36: i2c@4 {
323			#address-cells = <1>;
324			#size-cells = <0>;
325			reg = <4>;
326		};
327
328		imux37: i2c@5 {
329			#address-cells = <1>;
330			#size-cells = <0>;
331			reg = <5>;
332		};
333
334		imux38: i2c@6 {
335			#address-cells = <1>;
336			#size-cells = <0>;
337			reg = <6>;
338		};
339
340		imux39: i2c@7 {
341			#address-cells = <1>;
342			#size-cells = <0>;
343			reg = <7>;
344		};
345
346	};
347};
348
349&i2c12 {
350	status = "okay";
351};
352
353&i2c13 {
354	status = "okay";
355};
356
357&adc {
358	status = "okay";
359};
360
361&ehci1 {
362	status = "okay";
363};
364
365&uhci {
366	status = "okay";
367};
368
369&sdhci1 {
370	max-frequency = <25000000>;
371	/*
372	 * DMA mode needs to be disabled to avoid conflicts with UHCI
373	 * Controller in AST2500 SoC.
374	 */
375	sdhci-caps-mask = <0x0 0x580000>;
376};
377