1/* 2 * Copyright (C) 2016 Hans de Goede <hdegoede@redhat.com> 3 * 4 * This file is dual-licensed: you can use it either under the terms 5 * of the GPL or the X11 license, at your option. Note that this dual 6 * licensing only applies to this file, and not this project as a 7 * whole. 8 * 9 * a) This file is free software; you can redistribute it and/or 10 * modify it under the terms of the GNU General Public License as 11 * published by the Free Software Foundation; either version 2 of the 12 * License, or (at your option) any later version. 13 * 14 * This file is distributed in the hope that it will be useful, 15 * but WITHOUT ANY WARRANTY; without even the implied warranty of 16 * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the 17 * GNU General Public License for more details. 18 * 19 * Or, alternatively, 20 * 21 * b) Permission is hereby granted, free of charge, to any person 22 * obtaining a copy of this software and associated documentation 23 * files (the "Software"), to deal in the Software without 24 * restriction, including without limitation the rights to use, 25 * copy, modify, merge, publish, distribute, sublicense, and/or 26 * sell copies of the Software, and to permit persons to whom the 27 * Software is furnished to do so, subject to the following 28 * conditions: 29 * 30 * The above copyright notice and this permission notice shall be 31 * included in all copies or substantial portions of the Software. 32 * 33 * THE SOFTWARE IS PROVIDED "AS IS", WITHOUT WARRANTY OF ANY KIND, 34 * EXPRESS OR IMPLIED, INCLUDING BUT NOT LIMITED TO THE WARRANTIES 35 * OF MERCHANTABILITY, FITNESS FOR A PARTICULAR PURPOSE AND 36 * NONINFRINGEMENT. IN NO EVENT SHALL THE AUTHORS OR COPYRIGHT 37 * HOLDERS BE LIABLE FOR ANY CLAIM, DAMAGES OR OTHER LIABILITY, 38 * WHETHER IN AN ACTION OF CONTRACT, TORT OR OTHERWISE, ARISING 39 * FROM, OUT OF OR IN CONNECTION WITH THE SOFTWARE OR THE USE OR 40 * OTHER DEALINGS IN THE SOFTWARE. 41 */ 42 43/dts-v1/; 44#include "sun8i-h3.dtsi" 45#include "sunxi-common-regulators.dtsi" 46 47#include <dt-bindings/gpio/gpio.h> 48#include <dt-bindings/input/input.h> 49 50/ { 51 model = "Xunlong Orange Pi Lite"; 52 compatible = "xunlong,orangepi-lite", "allwinner,sun8i-h3"; 53 54 aliases { 55 /* The H3 emac is not used so the wifi is ethernet0 */ 56 ethernet0 = &rtl8189ftv; 57 serial0 = &uart0; 58 }; 59 60 chosen { 61 stdout-path = "serial0:115200n8"; 62 }; 63 64 connector { 65 compatible = "hdmi-connector"; 66 type = "a"; 67 68 port { 69 hdmi_con_in: endpoint { 70 remote-endpoint = <&hdmi_out_con>; 71 }; 72 }; 73 }; 74 75 leds { 76 compatible = "gpio-leds"; 77 78 pwr_led { 79 label = "orangepi:green:pwr"; 80 gpios = <&r_pio 0 10 GPIO_ACTIVE_HIGH>; 81 default-state = "on"; 82 }; 83 84 status_led { 85 label = "orangepi:red:status"; 86 gpios = <&pio 0 15 GPIO_ACTIVE_HIGH>; 87 }; 88 }; 89 90 gpio-keys { 91 compatible = "gpio-keys"; 92 93 switch-4 { 94 label = "sw4"; 95 linux,code = <BTN_0>; 96 gpios = <&r_pio 0 3 GPIO_ACTIVE_LOW>; 97 }; 98 }; 99}; 100 101&de { 102 status = "okay"; 103}; 104 105&ehci1 { 106 status = "okay"; 107}; 108 109&ehci2 { 110 status = "okay"; 111}; 112 113&hdmi { 114 status = "okay"; 115}; 116 117&hdmi_out { 118 hdmi_out_con: endpoint { 119 remote-endpoint = <&hdmi_con_in>; 120 }; 121}; 122 123&ir { 124 pinctrl-names = "default"; 125 pinctrl-0 = <&r_ir_rx_pin>; 126 status = "okay"; 127}; 128 129&mmc0 { 130 vmmc-supply = <®_vcc3v3>; 131 bus-width = <4>; 132 cd-gpios = <&pio 5 6 GPIO_ACTIVE_LOW>; /* PF6 */ 133 status = "okay"; 134}; 135 136&mmc1 { 137 vmmc-supply = <®_vcc3v3>; 138 bus-width = <4>; 139 non-removable; 140 status = "okay"; 141 142 /* 143 * Explicitly define the sdio device, so that we can add an ethernet 144 * alias for it (which e.g. makes u-boot set a mac-address). 145 */ 146 rtl8189ftv: sdio_wifi@1 { 147 reg = <1>; 148 }; 149}; 150 151&ohci1 { 152 status = "okay"; 153}; 154 155&ohci2 { 156 status = "okay"; 157}; 158 159&uart0 { 160 pinctrl-names = "default"; 161 pinctrl-0 = <&uart0_pa_pins>; 162 status = "okay"; 163}; 164 165&usbphy { 166 /* USB VBUS is always on */ 167 status = "okay"; 168}; 169