1/* 2 * Copyright 2014 Hans de Goede <hdegoede@redhat.com> 3 * 4 * This file is dual-licensed: you can use it either under the terms 5 * of the GPL or the X11 license, at your option. Note that this dual 6 * licensing only applies to this file, and not this project as a 7 * whole. 8 * 9 * a) This file is free software; you can redistribute it and/or 10 * modify it under the terms of the GNU General Public License as 11 * published by the Free Software Foundation; either version 2 of the 12 * License, or (at your option) any later version. 13 * 14 * This file is distributed in the hope that it will be useful, 15 * but WITHOUT ANY WARRANTY; without even the implied warranty of 16 * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the 17 * GNU General Public License for more details. 18 * 19 * Or, alternatively, 20 * 21 * b) Permission is hereby granted, free of charge, to any person 22 * obtaining a copy of this software and associated documentation 23 * files (the "Software"), to deal in the Software without 24 * restriction, including without limitation the rights to use, 25 * copy, modify, merge, publish, distribute, sublicense, and/or 26 * sell copies of the Software, and to permit persons to whom the 27 * Software is furnished to do so, subject to the following 28 * conditions: 29 * 30 * The above copyright notice and this permission notice shall be 31 * included in all copies or substantial portions of the Software. 32 * 33 * THE SOFTWARE IS PROVIDED "AS IS", WITHOUT WARRANTY OF ANY KIND, 34 * EXPRESS OR IMPLIED, INCLUDING BUT NOT LIMITED TO THE WARRANTIES 35 * OF MERCHANTABILITY, FITNESS FOR A PARTICULAR PURPOSE AND 36 * NONINFRINGEMENT. IN NO EVENT SHALL THE AUTHORS OR COPYRIGHT 37 * HOLDERS BE LIABLE FOR ANY CLAIM, DAMAGES OR OTHER LIABILITY, 38 * WHETHER IN AN ACTION OF CONTRACT, TORT OR OTHERWISE, ARISING 39 * FROM, OUT OF OR IN CONNECTION WITH THE SOFTWARE OR THE USE OR 40 * OTHER DEALINGS IN THE SOFTWARE. 41 */ 42 43/dts-v1/; 44#include "sun6i-a31.dtsi" 45#include "sunxi-common-regulators.dtsi" 46 47#include <dt-bindings/gpio/gpio.h> 48 49/ { 50 model = "Mele M9 top set box"; 51 compatible = "mele,m9", "allwinner,sun6i-a31"; 52 53 aliases { 54 serial0 = &uart0; 55 }; 56 57 chosen { 58 stdout-path = "serial0:115200n8"; 59 }; 60 61 leds { 62 compatible = "gpio-leds"; 63 64 led { 65 label = "m9:blue:pwr"; 66 gpios = <&pio 7 13 GPIO_ACTIVE_HIGH>; 67 default-state = "on"; 68 }; 69 }; 70}; 71 72&cpu0 { 73 cpu-supply = <®_dcdc3>; 74}; 75 76&ehci0 { 77 status = "okay"; 78}; 79 80&ehci1 { 81 status = "okay"; 82}; 83 84&gmac { 85 pinctrl-names = "default"; 86 pinctrl-0 = <&gmac_mii_pins>; 87 phy-handle = <&phy1>; 88 phy-mode = "mii"; 89 phy-supply = <®_dldo1>; 90 status = "okay"; 91}; 92 93&ir { 94 pinctrl-names = "default"; 95 pinctrl-0 = <&s_ir_rx_pin>; 96 status = "okay"; 97}; 98 99&mdio { 100 phy1: ethernet-phy@1 { 101 reg = <1>; 102 }; 103}; 104 105&mmc0 { 106 vmmc-supply = <®_dcdc1>; 107 bus-width = <4>; 108 cd-gpios = <&pio 7 22 GPIO_ACTIVE_LOW>; /* PH22 */ 109 status = "okay"; 110}; 111 112&p2wi { 113 status = "okay"; 114 115 axp22x: pmic@68 { 116 compatible = "x-powers,axp221"; 117 reg = <0x68>; 118 interrupt-parent = <&r_intc>; 119 interrupts = <GIC_SPI 32 IRQ_TYPE_LEVEL_LOW>; 120 }; 121}; 122 123#include "axp22x.dtsi" 124 125®_aldo1 { 126 regulator-min-microvolt = <3300000>; 127 regulator-max-microvolt = <3300000>; 128 regulator-name = "vcc-wifi"; 129}; 130 131®_aldo3 { 132 regulator-always-on; 133 regulator-min-microvolt = <2700000>; 134 regulator-max-microvolt = <3300000>; 135 regulator-name = "avcc"; 136}; 137 138®_dc5ldo { 139 regulator-always-on; 140 regulator-min-microvolt = <700000>; 141 regulator-max-microvolt = <1320000>; 142 regulator-name = "vdd-cpus"; /* This is an educated guess */ 143}; 144 145®_dcdc1 { 146 regulator-always-on; 147 regulator-min-microvolt = <3300000>; 148 regulator-max-microvolt = <3300000>; 149 regulator-name = "vcc-3v3"; 150}; 151 152®_dcdc2 { 153 regulator-min-microvolt = <700000>; 154 regulator-max-microvolt = <1320000>; 155 regulator-name = "vdd-gpu"; 156}; 157 158®_dcdc3 { 159 regulator-always-on; 160 regulator-min-microvolt = <700000>; 161 regulator-max-microvolt = <1320000>; 162 regulator-name = "vdd-cpu"; 163}; 164 165®_dcdc4 { 166 regulator-always-on; 167 regulator-min-microvolt = <700000>; 168 regulator-max-microvolt = <1320000>; 169 regulator-name = "vdd-sys-dll"; 170}; 171 172®_dcdc5 { 173 regulator-always-on; 174 regulator-min-microvolt = <1500000>; 175 regulator-max-microvolt = <1500000>; 176 regulator-name = "vcc-dram"; 177}; 178 179®_dldo1 { 180 regulator-min-microvolt = <3300000>; 181 regulator-max-microvolt = <3300000>; 182 regulator-name = "vcc-ethernet-phy"; 183}; 184 185/* 186 * Both reg_usb1_vbus and reg_dldo4 need to be on for the hub attached 187 * to usb1 to work, and we can list only one usb1_vbus-supply, so dldo4 is 188 * marked as regulator-always-on. 189 */ 190®_dldo4 { 191 regulator-always-on; 192 regulator-min-microvolt = <3300000>; 193 regulator-max-microvolt = <3300000>; 194 regulator-name = "vcc-usb-hub"; 195}; 196 197®_usb1_vbus { 198 gpio = <&pio 2 27 GPIO_ACTIVE_HIGH>; 199 status = "okay"; 200}; 201 202&uart0 { 203 pinctrl-names = "default"; 204 pinctrl-0 = <&uart0_ph_pins>; 205 status = "okay"; 206}; 207 208&usbphy { 209 usb1_vbus-supply = <®_usb1_vbus>; 210 usb2_vbus-supply = <®_aldo1>; 211 status = "okay"; 212}; 213