1/* 2 * Copyright 2015 Marcus Cooper <codekipper@gmail.com> 3 * 4 * This file is dual-licensed: you can use it either under the terms 5 * of the GPL or the X11 license, at your option. Note that this dual 6 * licensing only applies to this file, and not this project as a 7 * whole. 8 * 9 * a) This file is free software; you can redistribute it and/or 10 * modify it under the terms of the GNU General Public License as 11 * published by the Free Software Foundation; either version 2 of the 12 * License, or (at your option) any later version. 13 * 14 * This file is distributed in the hope that it will be useful, 15 * but WITHOUT ANY WARRANTY; without even the implied warranty of 16 * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the 17 * GNU General Public License for more details. 18 * 19 * Or, alternatively, 20 * 21 * b) Permission is hereby granted, free of charge, to any person 22 * obtaining a copy of this software and associated documentation 23 * files (the "Software"), to deal in the Software without 24 * restriction, including without limitation the rights to use, 25 * copy, modify, merge, publish, distribute, sublicense, and/or 26 * sell copies of the Software, and to permit persons to whom the 27 * Software is furnished to do so, subject to the following 28 * conditions: 29 * 30 * The above copyright notice and this permission notice shall be 31 * included in all copies or substantial portions of the Software. 32 * 33 * THE SOFTWARE IS PROVIDED "AS IS", WITHOUT WARRANTY OF ANY KIND, 34 * EXPRESS OR IMPLIED, INCLUDING BUT NOT LIMITED TO THE WARRANTIES 35 * OF MERCHANTABILITY, FITNESS FOR A PARTICULAR PURPOSE AND 36 * NONINFRINGEMENT. IN NO EVENT SHALL THE AUTHORS OR COPYRIGHT 37 * HOLDERS BE LIABLE FOR ANY CLAIM, DAMAGES OR OTHER LIABILITY, 38 * WHETHER IN AN ACTION OF CONTRACT, TORT OR OTHERWISE, ARISING 39 * FROM, OUT OF OR IN CONNECTION WITH THE SOFTWARE OR THE USE OR 40 * OTHER DEALINGS IN THE SOFTWARE. 41 */ 42 43/dts-v1/; 44#include "sun6i-a31.dtsi" 45#include "sunxi-common-regulators.dtsi" 46 47#include <dt-bindings/gpio/gpio.h> 48 49/ { 50 model = "Mele I7 Quad top set box"; 51 compatible = "mele,i7", "allwinner,sun6i-a31"; 52 53 aliases { 54 serial0 = &uart0; 55 }; 56 57 chosen { 58 stdout-path = "serial0:115200n8"; 59 }; 60 61 hdmi-connector { 62 compatible = "hdmi-connector"; 63 type = "a"; 64 65 port { 66 hdmi_con_in: endpoint { 67 remote-endpoint = <&hdmi_out_con>; 68 }; 69 }; 70 }; 71 72 leds { 73 compatible = "gpio-leds"; 74 75 led { 76 label = "i7:blue:usr"; 77 gpios = <&pio 7 13 GPIO_ACTIVE_HIGH>; 78 }; 79 }; 80 81 sound { 82 compatible = "simple-audio-card"; 83 simple-audio-card,name = "On-board SPDIF"; 84 simple-audio-card,cpu { 85 sound-dai = <&spdif>; 86 }; 87 88 simple-audio-card,codec { 89 sound-dai = <&spdif_out>; 90 }; 91 }; 92 93 spdif_out: spdif-out { 94 #sound-dai-cells = <0>; 95 compatible = "linux,spdif-dit"; 96 }; 97}; 98 99&codec { 100 allwinner,audio-routing = 101 "Headphone", "HP"; 102 status = "okay"; 103}; 104 105&de { 106 status = "okay"; 107}; 108 109&ehci0 { 110 status = "okay"; 111}; 112 113&ehci1 { 114 status = "okay"; 115}; 116 117&gmac { 118 pinctrl-names = "default"; 119 pinctrl-0 = <&gmac_mii_pins>; 120 phy-handle = <&phy1>; 121 phy-mode = "mii"; 122 status = "okay"; 123}; 124 125&hdmi { 126 status = "okay"; 127}; 128 129&hdmi_out { 130 hdmi_out_con: endpoint { 131 remote-endpoint = <&hdmi_con_in>; 132 }; 133}; 134 135&ir { 136 pinctrl-names = "default"; 137 pinctrl-0 = <&s_ir_rx_pin>; 138 status = "okay"; 139}; 140 141&mdio { 142 phy1: ethernet-phy@1 { 143 reg = <1>; 144 }; 145}; 146 147&mmc0 { 148 vmmc-supply = <®_vcc3v3>; 149 bus-width = <4>; 150 cd-gpios = <&pio 7 22 GPIO_ACTIVE_LOW>; /* PH22 */ 151 status = "okay"; 152}; 153 154®_usb1_vbus { 155 gpio = <&pio 2 27 GPIO_ACTIVE_HIGH>; 156 status = "okay"; 157}; 158 159&spdif { 160 pinctrl-names = "default"; 161 pinctrl-0 = <&spdif_tx_pin>; 162 status = "okay"; 163}; 164 165&tcon0 { 166 status = "okay"; 167}; 168 169&uart0 { 170 pinctrl-names = "default"; 171 pinctrl-0 = <&uart0_ph_pins>; 172 status = "okay"; 173}; 174 175&usbphy { 176 usb1_vbus-supply = <®_usb1_vbus>; 177 status = "okay"; 178}; 179