1/* 2 * Copyright 2014 Maxime Ripard 3 * 4 * Maxime Ripard <maxime.ripard@free-electrons.com> 5 * 6 * This file is dual-licensed: you can use it either under the terms 7 * of the GPL or the X11 license, at your option. Note that this dual 8 * licensing only applies to this file, and not this project as a 9 * whole. 10 * 11 * a) This file is free software; you can redistribute it and/or 12 * modify it under the terms of the GNU General Public License as 13 * published by the Free Software Foundation; either version 2 of the 14 * License, or (at your option) any later version. 15 * 16 * This file is distributed in the hope that it will be useful, 17 * but WITHOUT ANY WARRANTY; without even the implied warranty of 18 * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the 19 * GNU General Public License for more details. 20 * 21 * Or, alternatively, 22 * 23 * b) Permission is hereby granted, free of charge, to any person 24 * obtaining a copy of this software and associated documentation 25 * files (the "Software"), to deal in the Software without 26 * restriction, including without limitation the rights to use, 27 * copy, modify, merge, publish, distribute, sublicense, and/or 28 * sell copies of the Software, and to permit persons to whom the 29 * Software is furnished to do so, subject to the following 30 * conditions: 31 * 32 * The above copyright notice and this permission notice shall be 33 * included in all copies or substantial portions of the Software. 34 * 35 * THE SOFTWARE IS PROVIDED "AS IS", WITHOUT WARRANTY OF ANY KIND, 36 * EXPRESS OR IMPLIED, INCLUDING BUT NOT LIMITED TO THE WARRANTIES 37 * OF MERCHANTABILITY, FITNESS FOR A PARTICULAR PURPOSE AND 38 * NONINFRINGEMENT. IN NO EVENT SHALL THE AUTHORS OR COPYRIGHT 39 * HOLDERS BE LIABLE FOR ANY CLAIM, DAMAGES OR OTHER LIABILITY, 40 * WHETHER IN AN ACTION OF CONTRACT, TORT OR OTHERWISE, ARISING 41 * FROM, OUT OF OR IN CONNECTION WITH THE SOFTWARE OR THE USE OR 42 * OTHER DEALINGS IN THE SOFTWARE. 43 */ 44 45/dts-v1/; 46#include "sun6i-a31.dtsi" 47#include "sunxi-common-regulators.dtsi" 48 49#include <dt-bindings/gpio/gpio.h> 50 51/ { 52 model = "Merrii A31 Hummingbird"; 53 compatible = "merrii,a31-hummingbird", "allwinner,sun6i-a31"; 54 55 aliases { 56 rtc0 = &pcf8563; 57 rtc1 = &rtc; 58 serial0 = &uart0; 59 }; 60 61 chosen { 62 stdout-path = "serial0:115200n8"; 63 }; 64 65 hdmi-connector { 66 compatible = "hdmi-connector"; 67 type = "a"; 68 69 port { 70 hdmi_con_in: endpoint { 71 remote-endpoint = <&hdmi_out_con>; 72 }; 73 }; 74 }; 75 76 vga-connector { 77 compatible = "vga-connector"; 78 79 port { 80 vga_con_in: endpoint { 81 remote-endpoint = <&vga_dac_out>; 82 }; 83 }; 84 }; 85 86 vga-dac { 87 compatible = "dumb-vga-dac"; 88 vdd-supply = <®_vga_3v3>; 89 90 ports { 91 #address-cells = <1>; 92 #size-cells = <0>; 93 94 port@0 { 95 reg = <0>; 96 97 vga_dac_in: endpoint { 98 remote-endpoint = <&tcon0_out_vga>; 99 }; 100 }; 101 102 port@1 { 103 reg = <1>; 104 105 vga_dac_out: endpoint { 106 remote-endpoint = <&vga_con_in>; 107 }; 108 }; 109 }; 110 }; 111 112 reg_vga_3v3: vga-3v3-regulator { 113 compatible = "regulator-fixed"; 114 regulator-name = "vga-3v3"; 115 regulator-min-microvolt = <3300000>; 116 regulator-max-microvolt = <3300000>; 117 regulator-boot-on; 118 enable-active-high; 119 gpio = <&pio 7 25 GPIO_ACTIVE_HIGH>; /* PH25 */ 120 }; 121 122 wifi_pwrseq: pwrseq { 123 compatible = "mmc-pwrseq-simple"; 124 reset-gpios = <&pio 6 10 GPIO_ACTIVE_LOW>; /* PG10 */ 125 }; 126}; 127 128&codec { 129 allwinner,audio-routing = 130 "Headphone", "HP", 131 "Speaker", "LINEOUT", 132 "LINEIN", "Line In", 133 "MIC1", "Mic", 134 "MIC2", "Headset Mic", 135 "Mic", "MBIAS", 136 "Headset Mic", "HBIAS"; 137 allwinner,pa-gpios = <&pio 7 22 GPIO_ACTIVE_HIGH>; /* PH22 */ 138 status = "okay"; 139}; 140 141&cpu0 { 142 cpu-supply = <®_dcdc3>; 143}; 144 145&de { 146 status = "okay"; 147}; 148 149&ehci0 { 150 status = "okay"; 151}; 152 153&gmac { 154 pinctrl-names = "default"; 155 pinctrl-0 = <&gmac_rgmii_pins>; 156 phy-handle = <&phy1>; 157 phy-mode = "rgmii-id"; 158 status = "okay"; 159}; 160 161&hdmi { 162 status = "okay"; 163}; 164 165&hdmi_out { 166 hdmi_out_con: endpoint { 167 remote-endpoint = <&hdmi_con_in>; 168 }; 169}; 170 171&i2c0 { 172 /* pull-ups and devices require AXP221 DLDO3 */ 173 status = "failed"; 174}; 175 176&i2c1 { 177 status = "okay"; 178}; 179 180&i2c2 { 181 status = "okay"; 182 183 pcf8563: rtc@51 { 184 compatible = "nxp,pcf8563"; 185 reg = <0x51>; 186 }; 187}; 188 189&ir { 190 pinctrl-names = "default"; 191 pinctrl-0 = <&s_ir_rx_pin>; 192 status = "okay"; 193}; 194 195&mdio { 196 phy1: ethernet-phy@1 { 197 reg = <1>; 198 reset-gpios = <&pio 0 21 GPIO_ACTIVE_LOW>; 199 reset-assert-us = <10000>; 200 reset-deassert-us = <30000>; 201 }; 202}; 203 204&mmc0 { 205 vmmc-supply = <®_dcdc1>; 206 bus-width = <4>; 207 cd-gpios = <&pio 0 8 GPIO_ACTIVE_LOW>; /* PA8 */ 208 status = "okay"; 209}; 210 211&mmc1 { 212 vmmc-supply = <®_aldo1>; 213 mmc-pwrseq = <&wifi_pwrseq>; 214 bus-width = <4>; 215 non-removable; 216 status = "okay"; 217}; 218 219&ohci0 { 220 status = "okay"; 221}; 222 223&p2wi { 224 status = "okay"; 225 226 axp22x: pmic@68 { 227 compatible = "x-powers,axp221"; 228 reg = <0x68>; 229 interrupt-parent = <&r_intc>; 230 interrupts = <GIC_SPI 32 IRQ_TYPE_LEVEL_LOW>; 231 x-powers,drive-vbus-en; 232 }; 233}; 234 235#include "axp22x.dtsi" 236 237&ac_power_supply { 238 status = "okay"; 239}; 240 241®_aldo1 { 242 regulator-min-microvolt = <3300000>; 243 regulator-max-microvolt = <3300000>; 244 regulator-name = "vcc-wifi"; 245}; 246 247®_aldo3 { 248 regulator-always-on; 249 regulator-min-microvolt = <2700000>; 250 regulator-max-microvolt = <3300000>; 251 regulator-name = "avcc"; 252}; 253 254®_dc5ldo { 255 regulator-min-microvolt = <700000>; 256 regulator-max-microvolt = <1320000>; 257 regulator-name = "vdd-cpus"; 258}; 259 260®_dcdc1 { 261 regulator-always-on; 262 regulator-min-microvolt = <3000000>; 263 regulator-max-microvolt = <3000000>; 264 regulator-name = "vcc-3v0"; 265}; 266 267®_dcdc2 { 268 regulator-min-microvolt = <700000>; 269 regulator-max-microvolt = <1320000>; 270 regulator-name = "vdd-gpu"; 271}; 272 273®_dcdc3 { 274 regulator-always-on; 275 regulator-min-microvolt = <700000>; 276 regulator-max-microvolt = <1320000>; 277 regulator-name = "vdd-cpu"; 278}; 279 280®_dcdc4 { 281 regulator-always-on; 282 regulator-min-microvolt = <700000>; 283 regulator-max-microvolt = <1320000>; 284 regulator-name = "vdd-sys-dll"; 285}; 286 287®_dcdc5 { 288 regulator-always-on; 289 regulator-min-microvolt = <1500000>; 290 regulator-max-microvolt = <1500000>; 291 regulator-name = "vcc-dram"; 292}; 293 294®_drivevbus { 295 regulator-name = "usb0-vbus"; 296 status = "okay"; 297}; 298 299®_usb1_vbus { 300 gpio = <&pio 7 24 GPIO_ACTIVE_HIGH>; /* PH24 */ 301 status = "okay"; 302}; 303 304&tcon0 { 305 pinctrl-names = "default"; 306 pinctrl-0 = <&lcd0_rgb888_pins>; 307}; 308 309&tcon0_out { 310 tcon0_out_vga: endpoint@0 { 311 reg = <0>; 312 remote-endpoint = <&vga_dac_in>; 313 }; 314}; 315 316&uart0 { 317 pinctrl-names = "default"; 318 pinctrl-0 = <&uart0_ph_pins>; 319 status = "okay"; 320}; 321 322&usb_otg { 323 dr_mode = "otg"; 324 status = "okay"; 325}; 326 327&usb_power_supply { 328 status = "okay"; 329}; 330 331&usbphy { 332 usb0_id_det-gpios = <&pio 0 15 GPIO_ACTIVE_HIGH>; /* PA15 */ 333 usb0_vbus_det-gpios = <&pio 0 16 GPIO_ACTIVE_HIGH>; /* PA16 */ 334 usb0_vbus_power-supply = <&usb_power_supply>; 335 usb0_vbus-supply = <®_drivevbus>; 336 usb1_vbus-supply = <®_usb1_vbus>; 337 status = "okay"; 338}; 339