1/* 2 * Copyright 2013 Maxime Ripard 3 * 4 * Maxime Ripard <maxime.ripard@free-electrons.com> 5 * 6 * This file is dual-licensed: you can use it either under the terms 7 * of the GPL or the X11 license, at your option. Note that this dual 8 * licensing only applies to this file, and not this project as a 9 * whole. 10 * 11 * a) This file is free software; you can redistribute it and/or 12 * modify it under the terms of the GNU General Public License as 13 * published by the Free Software Foundation; either version 2 of the 14 * License, or (at your option) any later version. 15 * 16 * This file is distributed in the hope that it will be useful, 17 * but WITHOUT ANY WARRANTY; without even the implied warranty of 18 * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the 19 * GNU General Public License for more details. 20 * 21 * Or, alternatively, 22 * 23 * b) Permission is hereby granted, free of charge, to any person 24 * obtaining a copy of this software and associated documentation 25 * files (the "Software"), to deal in the Software without 26 * restriction, including without limitation the rights to use, 27 * copy, modify, merge, publish, distribute, sublicense, and/or 28 * sell copies of the Software, and to permit persons to whom the 29 * Software is furnished to do so, subject to the following 30 * conditions: 31 * 32 * The above copyright notice and this permission notice shall be 33 * included in all copies or substantial portions of the Software. 34 * 35 * THE SOFTWARE IS PROVIDED "AS IS", WITHOUT WARRANTY OF ANY KIND, 36 * EXPRESS OR IMPLIED, INCLUDING BUT NOT LIMITED TO THE WARRANTIES 37 * OF MERCHANTABILITY, FITNESS FOR A PARTICULAR PURPOSE AND 38 * NONINFRINGEMENT. IN NO EVENT SHALL THE AUTHORS OR COPYRIGHT 39 * HOLDERS BE LIABLE FOR ANY CLAIM, DAMAGES OR OTHER LIABILITY, 40 * WHETHER IN AN ACTION OF CONTRACT, TORT OR OTHERWISE, ARISING 41 * FROM, OUT OF OR IN CONNECTION WITH THE SOFTWARE OR THE USE OR 42 * OTHER DEALINGS IN THE SOFTWARE. 43 */ 44 45/dts-v1/; 46#include "sun5i-a10s.dtsi" 47#include "sunxi-common-regulators.dtsi" 48 49#include <dt-bindings/gpio/gpio.h> 50#include <dt-bindings/input/input.h> 51 52/ { 53 model = "Olimex A10s-Olinuxino Micro"; 54 compatible = "olimex,a10s-olinuxino-micro", "allwinner,sun5i-a10s"; 55 56 aliases { 57 serial0 = &uart0; 58 serial1 = &uart2; 59 serial2 = &uart3; 60 }; 61 62 chosen { 63 stdout-path = "serial0:115200n8"; 64 }; 65 66 connector { 67 compatible = "hdmi-connector"; 68 type = "a"; 69 70 port { 71 hdmi_con_in: endpoint { 72 remote-endpoint = <&hdmi_out_con>; 73 }; 74 }; 75 }; 76 77 leds { 78 compatible = "gpio-leds"; 79 pinctrl-names = "default"; 80 pinctrl-0 = <&led_pins_olinuxino>; 81 82 led { 83 label = "a10s-olinuxino-micro:green:usr"; 84 gpios = <&pio 4 3 GPIO_ACTIVE_HIGH>; 85 default-state = "on"; 86 }; 87 }; 88}; 89 90&be0 { 91 status = "okay"; 92}; 93 94&ehci0 { 95 status = "okay"; 96}; 97 98&emac { 99 pinctrl-names = "default"; 100 pinctrl-0 = <&emac_pa_pins>; 101 phy-handle = <&phy1>; 102 status = "okay"; 103}; 104 105&emac_sram { 106 status = "okay"; 107}; 108 109&hdmi { 110 status = "okay"; 111}; 112 113&hdmi_out { 114 hdmi_out_con: endpoint { 115 remote-endpoint = <&hdmi_con_in>; 116 }; 117}; 118 119&i2c0 { 120 status = "okay"; 121 122 axp152: pmic@30 { 123 reg = <0x30>; 124 interrupts = <0>; 125 }; 126}; 127 128#include "axp152.dtsi" 129 130&i2c1 { 131 status = "okay"; 132 133 eeprom@50 { 134 compatible = "atmel,24c16"; 135 pagesize = <16>; 136 reg = <0x50>; 137 read-only; 138 }; 139}; 140 141&i2c2 { 142 status = "okay"; 143}; 144 145&lradc { 146 vref-supply = <®_vcc3v0>; 147 status = "okay"; 148 149 button-191 { 150 label = "Volume Up"; 151 linux,code = <KEY_VOLUMEUP>; 152 channel = <0>; 153 voltage = <191274>; 154 }; 155 156 button-392 { 157 label = "Volume Down"; 158 linux,code = <KEY_VOLUMEDOWN>; 159 channel = <0>; 160 voltage = <392644>; 161 }; 162 163 button-601 { 164 label = "Menu"; 165 linux,code = <KEY_MENU>; 166 channel = <0>; 167 voltage = <601151>; 168 }; 169 170 button-795 { 171 label = "Enter"; 172 linux,code = <KEY_ENTER>; 173 channel = <0>; 174 voltage = <795090>; 175 }; 176 177 button-987 { 178 label = "Home"; 179 linux,code = <KEY_HOMEPAGE>; 180 channel = <0>; 181 voltage = <987387>; 182 }; 183}; 184 185&mdio { 186 status = "okay"; 187 188 phy1: ethernet-phy@1 { 189 reg = <1>; 190 }; 191}; 192 193&mmc0 { 194 vmmc-supply = <®_vcc3v3>; 195 bus-width = <4>; 196 cd-gpios = <&pio 6 1 GPIO_ACTIVE_LOW>; /* PG1 */ 197 status = "okay"; 198}; 199 200&mmc1 { 201 vmmc-supply = <®_vcc3v3>; 202 bus-width = <4>; 203 cd-gpios = <&pio 6 13 GPIO_ACTIVE_LOW>; /* PG13 */ 204 status = "okay"; 205}; 206 207&ohci0 { 208 status = "okay"; 209}; 210 211&otg_sram { 212 status = "okay"; 213}; 214 215&pio { 216 led_pins_olinuxino: led-pin { 217 pins = "PE3"; 218 function = "gpio_out"; 219 drive-strength = <20>; 220 }; 221}; 222 223®_usb0_vbus { 224 gpio = <&pio 6 11 GPIO_ACTIVE_HIGH>; /* PG11 */ 225 status = "okay"; 226}; 227 228®_usb1_vbus { 229 gpio = <&pio 1 10 GPIO_ACTIVE_HIGH>; 230 status = "okay"; 231}; 232 233&spi2 { 234 pinctrl-names = "default"; 235 pinctrl-0 = <&spi2_pb_pins>, 236 <&spi2_cs0_pb_pin>; 237 status = "okay"; 238}; 239 240&tcon0 { 241 status = "okay"; 242}; 243 244&uart0 { 245 pinctrl-names = "default"; 246 pinctrl-0 = <&uart0_pb_pins>; 247 status = "okay"; 248}; 249 250&uart2 { 251 pinctrl-names = "default"; 252 pinctrl-0 = <&uart2_pc_pins>; 253 status = "okay"; 254}; 255 256&uart3 { 257 pinctrl-names = "default"; 258 pinctrl-0 = <&uart3_pg_pins>; 259 status = "okay"; 260}; 261 262&usb_otg { 263 dr_mode = "otg"; 264 status = "okay"; 265}; 266 267&usbphy { 268 usb0_id_det-gpios = <&pio 6 12 (GPIO_ACTIVE_HIGH | GPIO_PULL_UP)>; /* PG12 */ 269 usb0_vbus-supply = <®_usb0_vbus>; 270 usb1_vbus-supply = <®_usb1_vbus>; 271 status = "okay"; 272}; 273