1/* 2 * Copyright 2015 Hans de Goede <hdegoede@redhat.com> 3 * 4 * This file is dual-licensed: you can use it either under the terms 5 * of the GPL or the X11 license, at your option. Note that this dual 6 * licensing only applies to this file, and not this project as a 7 * whole. 8 * 9 * a) This file is free software; you can redistribute it and/or 10 * modify it under the terms of the GNU General Public License as 11 * published by the Free Software Foundation; either version 2 of the 12 * License, or (at your option) any later version. 13 * 14 * This file is distributed in the hope that it will be useful, 15 * but WITHOUT ANY WARRANTY; without even the implied warranty of 16 * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the 17 * GNU General Public License for more details. 18 * 19 * Or, alternatively, 20 * 21 * b) Permission is hereby granted, free of charge, to any person 22 * obtaining a copy of this software and associated documentation 23 * files (the "Software"), to deal in the Software without 24 * restriction, including without limitation the rights to use, 25 * copy, modify, merge, publish, distribute, sublicense, and/or 26 * sell copies of the Software, and to permit persons to whom the 27 * Software is furnished to do so, subject to the following 28 * conditions: 29 * 30 * The above copyright notice and this permission notice shall be 31 * included in all copies or substantial portions of the Software. 32 * 33 * THE SOFTWARE IS PROVIDED "AS IS", WITHOUT WARRANTY OF ANY KIND, 34 * EXPRESS OR IMPLIED, INCLUDING BUT NOT LIMITED TO THE WARRANTIES 35 * OF MERCHANTABILITY, FITNESS FOR A PARTICULAR PURPOSE AND 36 * NONINFRINGEMENT. IN NO EVENT SHALL THE AUTHORS OR COPYRIGHT 37 * HOLDERS BE LIABLE FOR ANY CLAIM, DAMAGES OR OTHER LIABILITY, 38 * WHETHER IN AN ACTION OF CONTRACT, TORT OR OTHERWISE, ARISING 39 * FROM, OUT OF OR IN CONNECTION WITH THE SOFTWARE OR THE USE OR 40 * OTHER DEALINGS IN THE SOFTWARE. 41 */ 42 43/dts-v1/; 44#include "sun5i-a10s.dtsi" 45#include "sunxi-common-regulators.dtsi" 46#include <dt-bindings/gpio/gpio.h> 47 48/ { 49 model = "Auxtek t003 A10s hdmi tv-stick"; 50 compatible = "allwinner,auxtek-t003", "allwinner,sun5i-a10s"; 51 52 aliases { 53 serial0 = &uart0; 54 }; 55 56 chosen { 57 stdout-path = "serial0:115200n8"; 58 }; 59 60 leds { 61 compatible = "gpio-leds"; 62 pinctrl-names = "default"; 63 pinctrl-0 = <&led_pins_t003>; 64 65 led { 66 label = "t003-tv-dongle:red:usr"; 67 gpios = <&pio 1 2 GPIO_ACTIVE_HIGH>; /* PB2 */ 68 default-state = "on"; 69 }; 70 }; 71}; 72 73&ehci0 { 74 status = "okay"; 75}; 76 77&i2c0 { 78 status = "okay"; 79 80 axp152: pmic@30 { 81 compatible = "x-powers,axp152"; 82 reg = <0x30>; 83 interrupts = <0>; 84 interrupt-controller; 85 #interrupt-cells = <1>; 86 }; 87}; 88 89&mmc0 { 90 vmmc-supply = <®_vcc3v3>; 91 bus-width = <4>; 92 cd-gpios = <&pio 6 1 GPIO_ACTIVE_LOW>; /* PG1 */ 93 status = "okay"; 94}; 95 96&ohci0 { 97 status = "okay"; 98}; 99 100&otg_sram { 101 status = "okay"; 102}; 103 104&pio { 105 led_pins_t003: led-pin { 106 pins = "PB2"; 107 function = "gpio_out"; 108 drive-strength = <20>; 109 }; 110}; 111 112®_usb0_vbus { 113 gpio = <&pio 6 13 GPIO_ACTIVE_HIGH>; /* PG13 */ 114 status = "okay"; 115}; 116 117®_usb1_vbus { 118 gpio = <&pio 1 10 GPIO_ACTIVE_HIGH>; /* PB10 */ 119 status = "okay"; 120}; 121 122&uart0 { 123 pinctrl-names = "default"; 124 pinctrl-0 = <&uart0_pb_pins>; 125 status = "okay"; 126}; 127 128&usb_otg { 129 dr_mode = "host"; 130 status = "okay"; 131}; 132 133&usbphy { 134 usb0_vbus-supply = <®_usb0_vbus>; 135 usb1_vbus-supply = <®_usb1_vbus>; 136 status = "okay"; 137}; 138