1 // SPDX-License-Identifier: GPL-2.0-only 2 /* 3 * Copyright (C) 2004, 2007-2010, 2011-2012 Synopsys, Inc. (www.synopsys.com) 4 * 5 * RajeshwarR: Dec 11, 2007 6 * -- Added support for Inter Processor Interrupts 7 * 8 * Vineetg: Nov 1st, 2007 9 * -- Initial Write (Borrowed heavily from ARM) 10 */ 11 12 #include <linux/spinlock.h> 13 #include <linux/sched/mm.h> 14 #include <linux/interrupt.h> 15 #include <linux/mm.h> 16 #include <linux/cpu.h> 17 #include <linux/irq.h> 18 #include <linux/atomic.h> 19 #include <linux/cpumask.h> 20 #include <linux/reboot.h> 21 #include <linux/irqdomain.h> 22 #include <linux/export.h> 23 #include <linux/of_fdt.h> 24 #include <linux/string.h> 25 26 #include <asm/mach_desc.h> 27 #include <asm/setup.h> 28 #include <asm/smp.h> 29 #include <asm/processor.h> 30 31 #ifndef CONFIG_ARC_HAS_LLSC 32 arch_spinlock_t smp_atomic_ops_lock = __ARCH_SPIN_LOCK_UNLOCKED; 33 34 EXPORT_SYMBOL_GPL(smp_atomic_ops_lock); 35 #endif 36 37 struct plat_smp_ops __weak plat_smp_ops; 38 39 /* XXX: per cpu ? Only needed once in early secondary boot */ 40 struct task_struct *secondary_idle_tsk; 41 42 static int __init arc_get_cpu_map(const char *name, struct cpumask *cpumask) 43 { 44 unsigned long dt_root = of_get_flat_dt_root(); 45 const char *buf; 46 int len; 47 48 buf = of_get_flat_dt_prop(dt_root, name, &len); 49 if (!buf || !memchr(buf, '\0', len)) 50 return -EINVAL; 51 52 if (cpulist_parse(buf, cpumask)) 53 return -EINVAL; 54 55 return 0; 56 } 57 58 /* 59 * Read from DeviceTree and setup cpu possible mask. If there is no 60 * "possible-cpus" property in DeviceTree pretend all [0..NR_CPUS-1] exist. 61 */ 62 static void __init arc_init_cpu_possible(void) 63 { 64 struct cpumask cpumask; 65 66 if (arc_get_cpu_map("possible-cpus", &cpumask)) { 67 pr_warn("Failed to get possible-cpus from dtb, pretending all %u cpus exist\n", 68 NR_CPUS); 69 70 cpumask_setall(&cpumask); 71 } 72 73 if (!cpumask_test_cpu(0, &cpumask)) 74 panic("Master cpu (cpu[0]) is missed in cpu possible mask!"); 75 76 init_cpu_possible(&cpumask); 77 } 78 79 /* 80 * Called from setup_arch() before calling setup_processor() 81 * 82 * - Initialise the CPU possible map early - this describes the CPUs 83 * which may be present or become present in the system. 84 * - Call early smp init hook. This can initialize a specific multi-core 85 * IP which is say common to several platforms (hence not part of 86 * platform specific int_early() hook) 87 */ 88 void __init smp_init_cpus(void) 89 { 90 arc_init_cpu_possible(); 91 92 if (plat_smp_ops.init_early_smp) 93 plat_smp_ops.init_early_smp(); 94 } 95 96 /* called from init ( ) => process 1 */ 97 void __init smp_prepare_cpus(unsigned int max_cpus) 98 { 99 /* 100 * if platform didn't set the present map already, do it now 101 * boot cpu is set to present already by init/main.c 102 */ 103 if (num_present_cpus() <= 1) 104 init_cpu_present(cpu_possible_mask); 105 } 106 107 void __init smp_cpus_done(unsigned int max_cpus) 108 { 109 110 } 111 112 /* 113 * Default smp boot helper for Run-on-reset case where all cores start off 114 * together. Non-masters need to wait for Master to start running. 115 * This is implemented using a flag in memory, which Non-masters spin-wait on. 116 * Master sets it to cpu-id of core to "ungate" it. 117 */ 118 static volatile int wake_flag; 119 120 #ifdef CONFIG_ISA_ARCOMPACT 121 122 #define __boot_read(f) f 123 #define __boot_write(f, v) f = v 124 125 #else 126 127 #define __boot_read(f) arc_read_uncached_32(&f) 128 #define __boot_write(f, v) arc_write_uncached_32(&f, v) 129 130 #endif 131 132 static void arc_default_smp_cpu_kick(int cpu, unsigned long pc) 133 { 134 BUG_ON(cpu == 0); 135 136 __boot_write(wake_flag, cpu); 137 } 138 139 void arc_platform_smp_wait_to_boot(int cpu) 140 { 141 /* for halt-on-reset, we've waited already */ 142 if (IS_ENABLED(CONFIG_ARC_SMP_HALT_ON_RESET)) 143 return; 144 145 while (__boot_read(wake_flag) != cpu) 146 ; 147 148 __boot_write(wake_flag, 0); 149 } 150 151 const char *arc_platform_smp_cpuinfo(void) 152 { 153 return plat_smp_ops.info ? : ""; 154 } 155 156 /* 157 * The very first "C" code executed by secondary 158 * Called from asm stub in head.S 159 * "current"/R25 already setup by low level boot code 160 */ 161 void start_kernel_secondary(void) 162 { 163 struct mm_struct *mm = &init_mm; 164 unsigned int cpu = smp_processor_id(); 165 166 /* MMU, Caches, Vector Table, Interrupts etc */ 167 setup_processor(); 168 169 mmget(mm); 170 mmgrab(mm); 171 current->active_mm = mm; 172 cpumask_set_cpu(cpu, mm_cpumask(mm)); 173 174 /* Some SMP H/w setup - for each cpu */ 175 if (plat_smp_ops.init_per_cpu) 176 plat_smp_ops.init_per_cpu(cpu); 177 178 if (machine_desc->init_per_cpu) 179 machine_desc->init_per_cpu(cpu); 180 181 notify_cpu_starting(cpu); 182 set_cpu_online(cpu, true); 183 184 pr_info("## CPU%u LIVE ##: Executing Code...\n", cpu); 185 186 local_irq_enable(); 187 cpu_startup_entry(CPUHP_AP_ONLINE_IDLE); 188 } 189 190 /* 191 * Called from kernel_init( ) -> smp_init( ) - for each CPU 192 * 193 * At this point, Secondary Processor is "HALT"ed: 194 * -It booted, but was halted in head.S 195 * -It was configured to halt-on-reset 196 * So need to wake it up. 197 * 198 * Essential requirements being where to run from (PC) and stack (SP) 199 */ 200 int __cpu_up(unsigned int cpu, struct task_struct *idle) 201 { 202 unsigned long wait_till; 203 204 secondary_idle_tsk = idle; 205 206 pr_info("Idle Task [%d] %p", cpu, idle); 207 pr_info("Trying to bring up CPU%u ...\n", cpu); 208 209 if (plat_smp_ops.cpu_kick) 210 plat_smp_ops.cpu_kick(cpu, 211 (unsigned long)first_lines_of_secondary); 212 else 213 arc_default_smp_cpu_kick(cpu, (unsigned long)NULL); 214 215 /* wait for 1 sec after kicking the secondary */ 216 wait_till = jiffies + HZ; 217 while (time_before(jiffies, wait_till)) { 218 if (cpu_online(cpu)) 219 break; 220 } 221 222 if (!cpu_online(cpu)) { 223 pr_info("Timeout: CPU%u FAILED to come up !!!\n", cpu); 224 return -1; 225 } 226 227 secondary_idle_tsk = NULL; 228 229 return 0; 230 } 231 232 /*****************************************************************************/ 233 /* Inter Processor Interrupt Handling */ 234 /*****************************************************************************/ 235 236 enum ipi_msg_type { 237 IPI_EMPTY = 0, 238 IPI_RESCHEDULE = 1, 239 IPI_CALL_FUNC, 240 IPI_CPU_STOP, 241 }; 242 243 /* 244 * In arches with IRQ for each msg type (above), receiver can use IRQ-id to 245 * figure out what msg was sent. For those which don't (ARC has dedicated IPI 246 * IRQ), the msg-type needs to be conveyed via per-cpu data 247 */ 248 249 static DEFINE_PER_CPU(unsigned long, ipi_data); 250 251 static void ipi_send_msg_one(int cpu, enum ipi_msg_type msg) 252 { 253 unsigned long __percpu *ipi_data_ptr = per_cpu_ptr(&ipi_data, cpu); 254 unsigned long old, new; 255 unsigned long flags; 256 257 pr_debug("%d Sending msg [%d] to %d\n", smp_processor_id(), msg, cpu); 258 259 local_irq_save(flags); 260 261 /* 262 * Atomically write new msg bit (in case others are writing too), 263 * and read back old value 264 */ 265 do { 266 new = old = *ipi_data_ptr; 267 new |= 1U << msg; 268 } while (cmpxchg(ipi_data_ptr, old, new) != old); 269 270 /* 271 * Call the platform specific IPI kick function, but avoid if possible: 272 * Only do so if there's no pending msg from other concurrent sender(s). 273 * Otherwise, receiver will see this msg as well when it takes the 274 * IPI corresponding to that msg. This is true, even if it is already in 275 * IPI handler, because !@old means it has not yet dequeued the msg(s) 276 * so @new msg can be a free-loader 277 */ 278 if (plat_smp_ops.ipi_send && !old) 279 plat_smp_ops.ipi_send(cpu); 280 281 local_irq_restore(flags); 282 } 283 284 static void ipi_send_msg(const struct cpumask *callmap, enum ipi_msg_type msg) 285 { 286 unsigned int cpu; 287 288 for_each_cpu(cpu, callmap) 289 ipi_send_msg_one(cpu, msg); 290 } 291 292 void arch_smp_send_reschedule(int cpu) 293 { 294 ipi_send_msg_one(cpu, IPI_RESCHEDULE); 295 } 296 297 void smp_send_stop(void) 298 { 299 struct cpumask targets; 300 cpumask_copy(&targets, cpu_online_mask); 301 cpumask_clear_cpu(smp_processor_id(), &targets); 302 ipi_send_msg(&targets, IPI_CPU_STOP); 303 } 304 305 void arch_send_call_function_single_ipi(int cpu) 306 { 307 ipi_send_msg_one(cpu, IPI_CALL_FUNC); 308 } 309 310 void arch_send_call_function_ipi_mask(const struct cpumask *mask) 311 { 312 ipi_send_msg(mask, IPI_CALL_FUNC); 313 } 314 315 /* 316 * ipi_cpu_stop - handle IPI from smp_send_stop() 317 */ 318 static void ipi_cpu_stop(void) 319 { 320 machine_halt(); 321 } 322 323 static inline int __do_IPI(unsigned long msg) 324 { 325 int rc = 0; 326 327 switch (msg) { 328 case IPI_RESCHEDULE: 329 scheduler_ipi(); 330 break; 331 332 case IPI_CALL_FUNC: 333 generic_smp_call_function_interrupt(); 334 break; 335 336 case IPI_CPU_STOP: 337 ipi_cpu_stop(); 338 break; 339 340 default: 341 rc = 1; 342 } 343 344 return rc; 345 } 346 347 /* 348 * arch-common ISR to handle for inter-processor interrupts 349 * Has hooks for platform specific IPI 350 */ 351 static irqreturn_t do_IPI(int irq, void *dev_id) 352 { 353 unsigned long pending; 354 unsigned long __maybe_unused copy; 355 356 pr_debug("IPI [%ld] received on cpu %d\n", 357 *this_cpu_ptr(&ipi_data), smp_processor_id()); 358 359 if (plat_smp_ops.ipi_clear) 360 plat_smp_ops.ipi_clear(irq); 361 362 /* 363 * "dequeue" the msg corresponding to this IPI (and possibly other 364 * piggybacked msg from elided IPIs: see ipi_send_msg_one() above) 365 */ 366 copy = pending = xchg(this_cpu_ptr(&ipi_data), 0); 367 368 do { 369 unsigned long msg = __ffs(pending); 370 int rc; 371 372 rc = __do_IPI(msg); 373 if (rc) 374 pr_info("IPI with bogus msg %ld in %ld\n", msg, copy); 375 pending &= ~(1U << msg); 376 } while (pending); 377 378 return IRQ_HANDLED; 379 } 380 381 /* 382 * API called by platform code to hookup arch-common ISR to their IPI IRQ 383 * 384 * Note: If IPI is provided by platform (vs. say ARC MCIP), their intc setup/map 385 * function needs to call irq_set_percpu_devid() for IPI IRQ, otherwise 386 * request_percpu_irq() below will fail 387 */ 388 static DEFINE_PER_CPU(int, ipi_dev); 389 390 int smp_ipi_irq_setup(int cpu, irq_hw_number_t hwirq) 391 { 392 int *dev = per_cpu_ptr(&ipi_dev, cpu); 393 unsigned int virq = irq_find_mapping(NULL, hwirq); 394 395 if (!virq) 396 panic("Cannot find virq for root domain and hwirq=%lu", hwirq); 397 398 /* Boot cpu calls request, all call enable */ 399 if (!cpu) { 400 int rc; 401 402 rc = request_percpu_irq(virq, do_IPI, "IPI Interrupt", dev); 403 if (rc) 404 panic("Percpu IRQ request failed for %u\n", virq); 405 } 406 407 enable_percpu_irq(virq, 0); 408 409 return 0; 410 } 411