xref: /linux/arch/arc/kernel/process.c (revision 74395567a3011a07f51cf959be96c1eecb3e6df8)
1 // SPDX-License-Identifier: GPL-2.0-only
2 /*
3  * Copyright (C) 2004, 2007-2010, 2011-2012 Synopsys, Inc. (www.synopsys.com)
4  *
5  * Amit Bhor, Kanika Nema: Codito Technologies 2004
6  */
7 
8 #include <linux/errno.h>
9 #include <linux/module.h>
10 #include <linux/sched.h>
11 #include <linux/sched/task.h>
12 #include <linux/sched/task_stack.h>
13 
14 #include <linux/mm.h>
15 #include <linux/fs.h>
16 #include <linux/unistd.h>
17 #include <linux/ptrace.h>
18 #include <linux/slab.h>
19 #include <linux/syscalls.h>
20 #include <linux/elf.h>
21 #include <linux/tick.h>
22 
23 #include <asm/fpu.h>
24 
25 SYSCALL_DEFINE1(arc_settls, void *, user_tls_data_ptr)
26 {
27 	task_thread_info(current)->thr_ptr = (unsigned int)user_tls_data_ptr;
28 	return 0;
29 }
30 
31 /*
32  * We return the user space TLS data ptr as sys-call return code
33  * Ideally it should be copy to user.
34  * However we can cheat by the fact that some sys-calls do return
35  * absurdly high values
36  * Since the tls dat aptr is not going to be in range of 0xFFFF_xxxx
37  * it won't be considered a sys-call error
38  * and it will be loads better than copy-to-user, which is a definite
39  * D-TLB Miss
40  */
41 SYSCALL_DEFINE0(arc_gettls)
42 {
43 	return task_thread_info(current)->thr_ptr;
44 }
45 
46 SYSCALL_DEFINE3(arc_usr_cmpxchg, int __user *, uaddr, int, expected, int, new)
47 {
48 	struct pt_regs *regs = current_pt_regs();
49 	u32 uval;
50 	int ret;
51 
52 	/*
53 	 * This is only for old cores lacking LLOCK/SCOND, which by definition
54 	 * can't possibly be SMP. Thus doesn't need to be SMP safe.
55 	 * And this also helps reduce the overhead for serializing in
56 	 * the UP case
57 	 */
58 	WARN_ON_ONCE(IS_ENABLED(CONFIG_SMP));
59 
60 	/* Z indicates to userspace if operation succeeded */
61 	regs->status32 &= ~STATUS_Z_MASK;
62 
63 	ret = access_ok(uaddr, sizeof(*uaddr));
64 	if (!ret)
65 		 goto fail;
66 
67 again:
68 	preempt_disable();
69 
70 	ret = __get_user(uval, uaddr);
71 	if (ret)
72 		 goto fault;
73 
74 	if (uval != expected)
75 		 goto out;
76 
77 	ret = __put_user(new, uaddr);
78 	if (ret)
79 		 goto fault;
80 
81 	regs->status32 |= STATUS_Z_MASK;
82 
83 out:
84 	preempt_enable();
85 	return uval;
86 
87 fault:
88 	preempt_enable();
89 
90 	if (unlikely(ret != -EFAULT))
91 		 goto fail;
92 
93 	mmap_read_lock(current->mm);
94 	ret = fixup_user_fault(current->mm, (unsigned long) uaddr,
95 			       FAULT_FLAG_WRITE, NULL);
96 	mmap_read_unlock(current->mm);
97 
98 	if (likely(!ret))
99 		 goto again;
100 
101 fail:
102 	force_sig(SIGSEGV);
103 	return ret;
104 }
105 
106 #ifdef CONFIG_ISA_ARCV2
107 
108 void arch_cpu_idle(void)
109 {
110 	/* Re-enable interrupts <= default irq priority before committing SLEEP */
111 	const unsigned int arg = 0x10 | ARCV2_IRQ_DEF_PRIO;
112 
113 	__asm__ __volatile__(
114 		"sleep %0	\n"
115 		:
116 		:"I"(arg)); /* can't be "r" has to be embedded const */
117 
118 	raw_local_irq_disable();
119 }
120 
121 #else	/* ARC700 */
122 
123 void arch_cpu_idle(void)
124 {
125 	/* sleep, but enable both set E1/E2 (levels of interrupts) before committing */
126 	__asm__ __volatile__("sleep 0x3	\n");
127 	raw_local_irq_disable();
128 }
129 
130 #endif
131 
132 asmlinkage void ret_from_fork(void);
133 
134 /*
135  * Copy architecture-specific thread state
136  *
137  * Layout of Child kernel mode stack as setup at the end of this function is
138  *
139  * |     ...        |
140  * |     ...        |
141  * |    unused      |
142  * |                |
143  * ------------------
144  * |     r25        |   <==== top of Stack (thread.ksp)
145  * ~                ~
146  * |    --to--      |   (CALLEE Regs of kernel mode)
147  * |     r13        |
148  * ------------------
149  * |     fp         |
150  * |    blink       |   @ret_from_fork
151  * ------------------
152  * |                |
153  * ~                ~
154  * ~                ~
155  * |                |
156  * ------------------
157  * |     r12        |
158  * ~                ~
159  * |    --to--      |   (scratch Regs of user mode)
160  * |     r0         |
161  * ------------------
162  * |      SP        |
163  * |    orig_r0     |
164  * |    event/ECR   |
165  * |    user_r25    |
166  * ------------------  <===== END of PAGE
167  */
168 int copy_thread(struct task_struct *p, const struct kernel_clone_args *args)
169 {
170 	unsigned long clone_flags = args->flags;
171 	unsigned long usp = args->stack;
172 	unsigned long tls = args->tls;
173 	struct pt_regs *c_regs;        /* child's pt_regs */
174 	unsigned long *childksp;       /* to unwind out of __switch_to() */
175 	struct callee_regs *c_callee;  /* child's callee regs */
176 	struct callee_regs *parent_callee;  /* paren't callee */
177 	struct pt_regs *regs = current_pt_regs();
178 
179 	/* Mark the specific anchors to begin with (see pic above) */
180 	c_regs = task_pt_regs(p);
181 	childksp = (unsigned long *)c_regs - 2;  /* 2 words for FP/BLINK */
182 	c_callee = ((struct callee_regs *)childksp) - 1;
183 
184 	/*
185 	 * __switch_to() uses thread.ksp to start unwinding stack
186 	 * For kernel threads we don't need to create callee regs, the
187 	 * stack layout nevertheless needs to remain the same.
188 	 * Also, since __switch_to anyways unwinds callee regs, we use
189 	 * this to populate kernel thread entry-pt/args into callee regs,
190 	 * so that ret_from_kernel_thread() becomes simpler.
191 	 */
192 	p->thread.ksp = (unsigned long)c_callee;	/* THREAD_KSP */
193 
194 	/* __switch_to expects FP(0), BLINK(return addr) at top */
195 	childksp[0] = 0;			/* fp */
196 	childksp[1] = (unsigned long)ret_from_fork; /* blink */
197 
198 	if (unlikely(args->fn)) {
199 		memset(c_regs, 0, sizeof(struct pt_regs));
200 
201 		c_callee->r13 = (unsigned long)args->fn_arg;
202 		c_callee->r14 = (unsigned long)args->fn;
203 
204 		return 0;
205 	}
206 
207 	/*--------- User Task Only --------------*/
208 
209 	/* __switch_to expects FP(0), BLINK(return addr) at top of stack */
210 	childksp[0] = 0;				/* for POP fp */
211 	childksp[1] = (unsigned long)ret_from_fork;	/* for POP blink */
212 
213 	/* Copy parents pt regs on child's kernel mode stack */
214 	*c_regs = *regs;
215 
216 	if (usp)
217 		c_regs->sp = usp;
218 
219 	c_regs->r0 = 0;		/* fork returns 0 in child */
220 
221 	parent_callee = ((struct callee_regs *)regs) - 1;
222 	*c_callee = *parent_callee;
223 
224 	if (unlikely(clone_flags & CLONE_SETTLS)) {
225 		/*
226 		 * set task's userland tls data ptr from 4th arg
227 		 * clone C-lib call is difft from clone sys-call
228 		 */
229 		task_thread_info(p)->thr_ptr = tls;
230 	} else {
231 		/* Normal fork case: set parent's TLS ptr in child */
232 		task_thread_info(p)->thr_ptr =
233 		task_thread_info(current)->thr_ptr;
234 	}
235 
236 
237 	/*
238 	 * setup usermode thread pointer #1:
239 	 * when child is picked by scheduler, __switch_to() uses @c_callee to
240 	 * populate usermode callee regs: this works (despite being in a kernel
241 	 * function) since special return path for child @ret_from_fork()
242 	 * ensures those regs are not clobbered all the way to RTIE to usermode
243 	 */
244 	c_callee->r25 = task_thread_info(p)->thr_ptr;
245 
246 #ifdef CONFIG_ARC_CURR_IN_REG
247 	/*
248 	 * setup usermode thread pointer #2:
249 	 * however for this special use of r25 in kernel, __switch_to() sets
250 	 * r25 for kernel needs and only in the final return path is usermode
251 	 * r25 setup, from pt_regs->user_r25. So set that up as well
252 	 */
253 	c_regs->user_r25 = c_callee->r25;
254 #endif
255 
256 	return 0;
257 }
258 
259 /*
260  * Do necessary setup to start up a new user task
261  */
262 void start_thread(struct pt_regs *regs, unsigned long pc, unsigned long usp)
263 {
264 	regs->sp = usp;
265 	regs->ret = pc;
266 
267 	/*
268 	 * [U]ser Mode bit set
269 	 * [L] ZOL loop inhibited to begin with - cleared by a LP insn
270 	 * Interrupts enabled
271 	 */
272 	regs->status32 = STATUS_U_MASK | STATUS_L_MASK | ISA_INIT_STATUS_BITS;
273 
274 	fpu_init_task(regs);
275 
276 	/* bogus seed values for debugging */
277 	regs->lp_start = 0x10;
278 	regs->lp_end = 0x80;
279 }
280 
281 /*
282  * Some archs flush debug and FPU info here
283  */
284 void flush_thread(void)
285 {
286 }
287 
288 int elf_check_arch(const struct elf32_hdr *x)
289 {
290 	unsigned int eflags;
291 
292 	if (x->e_machine != EM_ARC_INUSE) {
293 		pr_err("ELF not built for %s ISA\n",
294 			is_isa_arcompact() ? "ARCompact":"ARCv2");
295 		return 0;
296 	}
297 
298 	eflags = x->e_flags;
299 	if ((eflags & EF_ARC_OSABI_MSK) != EF_ARC_OSABI_CURRENT) {
300 		pr_err("ABI mismatch - you need newer toolchain\n");
301 		force_fatal_sig(SIGSEGV);
302 		return 0;
303 	}
304 
305 	return 1;
306 }
307 EXPORT_SYMBOL(elf_check_arch);
308