xref: /linux/arch/arc/kernel/process.c (revision 18f90d372cf35b387663f1567de701e5393f6eb5)
1 /*
2  * Copyright (C) 2004, 2007-2010, 2011-2012 Synopsys, Inc. (www.synopsys.com)
3  *
4  * This program is free software; you can redistribute it and/or modify
5  * it under the terms of the GNU General Public License version 2 as
6  * published by the Free Software Foundation.
7  *
8  * Amit Bhor, Kanika Nema: Codito Technologies 2004
9  */
10 
11 #include <linux/errno.h>
12 #include <linux/module.h>
13 #include <linux/sched.h>
14 #include <linux/sched/task.h>
15 #include <linux/sched/task_stack.h>
16 
17 #include <linux/mm.h>
18 #include <linux/fs.h>
19 #include <linux/unistd.h>
20 #include <linux/ptrace.h>
21 #include <linux/slab.h>
22 #include <linux/syscalls.h>
23 #include <linux/elf.h>
24 #include <linux/tick.h>
25 
26 SYSCALL_DEFINE1(arc_settls, void *, user_tls_data_ptr)
27 {
28 	task_thread_info(current)->thr_ptr = (unsigned int)user_tls_data_ptr;
29 	return 0;
30 }
31 
32 /*
33  * We return the user space TLS data ptr as sys-call return code
34  * Ideally it should be copy to user.
35  * However we can cheat by the fact that some sys-calls do return
36  * absurdly high values
37  * Since the tls dat aptr is not going to be in range of 0xFFFF_xxxx
38  * it won't be considered a sys-call error
39  * and it will be loads better than copy-to-user, which is a definite
40  * D-TLB Miss
41  */
42 SYSCALL_DEFINE0(arc_gettls)
43 {
44 	return task_thread_info(current)->thr_ptr;
45 }
46 
47 SYSCALL_DEFINE3(arc_usr_cmpxchg, int *, uaddr, int, expected, int, new)
48 {
49 	struct pt_regs *regs = current_pt_regs();
50 	u32 uval;
51 	int ret;
52 
53 	/*
54 	 * This is only for old cores lacking LLOCK/SCOND, which by defintion
55 	 * can't possibly be SMP. Thus doesn't need to be SMP safe.
56 	 * And this also helps reduce the overhead for serializing in
57 	 * the UP case
58 	 */
59 	WARN_ON_ONCE(IS_ENABLED(CONFIG_SMP));
60 
61 	/* Z indicates to userspace if operation succeded */
62 	regs->status32 &= ~STATUS_Z_MASK;
63 
64 	ret = access_ok(uaddr, sizeof(*uaddr));
65 	if (!ret)
66 		 goto fail;
67 
68 again:
69 	preempt_disable();
70 
71 	ret = __get_user(uval, uaddr);
72 	if (ret)
73 		 goto fault;
74 
75 	if (uval != expected)
76 		 goto out;
77 
78 	ret = __put_user(new, uaddr);
79 	if (ret)
80 		 goto fault;
81 
82 	regs->status32 |= STATUS_Z_MASK;
83 
84 out:
85 	preempt_enable();
86 	return uval;
87 
88 fault:
89 	preempt_enable();
90 
91 	if (unlikely(ret != -EFAULT))
92 		 goto fail;
93 
94 	down_read(&current->mm->mmap_sem);
95 	ret = fixup_user_fault(current, current->mm, (unsigned long) uaddr,
96 			       FAULT_FLAG_WRITE, NULL);
97 	up_read(&current->mm->mmap_sem);
98 
99 	if (likely(!ret))
100 		 goto again;
101 
102 fail:
103 	force_sig(SIGSEGV, current);
104 	return ret;
105 }
106 
107 #ifdef CONFIG_ISA_ARCV2
108 
109 void arch_cpu_idle(void)
110 {
111 	/* Re-enable interrupts <= default irq priority before commiting SLEEP */
112 	const unsigned int arg = 0x10 | ARCV2_IRQ_DEF_PRIO;
113 
114 	__asm__ __volatile__(
115 		"sleep %0	\n"
116 		:
117 		:"I"(arg)); /* can't be "r" has to be embedded const */
118 }
119 
120 #elif defined(CONFIG_EZNPS_MTM_EXT)	/* ARC700 variant in NPS */
121 
122 void arch_cpu_idle(void)
123 {
124 	/* only the calling HW thread needs to sleep */
125 	__asm__ __volatile__(
126 		".word %0	\n"
127 		:
128 		:"i"(CTOP_INST_HWSCHD_WFT_IE12));
129 }
130 
131 #else	/* ARC700 */
132 
133 void arch_cpu_idle(void)
134 {
135 	/* sleep, but enable both set E1/E2 (levels of interrutps) before committing */
136 	__asm__ __volatile__("sleep 0x3	\n");
137 }
138 
139 #endif
140 
141 asmlinkage void ret_from_fork(void);
142 
143 /*
144  * Copy architecture-specific thread state
145  *
146  * Layout of Child kernel mode stack as setup at the end of this function is
147  *
148  * |     ...        |
149  * |     ...        |
150  * |    unused      |
151  * |                |
152  * ------------------
153  * |     r25        |   <==== top of Stack (thread.ksp)
154  * ~                ~
155  * |    --to--      |   (CALLEE Regs of kernel mode)
156  * |     r13        |
157  * ------------------
158  * |     fp         |
159  * |    blink       |   @ret_from_fork
160  * ------------------
161  * |                |
162  * ~                ~
163  * ~                ~
164  * |                |
165  * ------------------
166  * |     r12        |
167  * ~                ~
168  * |    --to--      |   (scratch Regs of user mode)
169  * |     r0         |
170  * ------------------
171  * |      SP        |
172  * |    orig_r0     |
173  * |    event/ECR   |
174  * |    user_r25    |
175  * ------------------  <===== END of PAGE
176  */
177 int copy_thread(unsigned long clone_flags,
178 		unsigned long usp, unsigned long kthread_arg,
179 		struct task_struct *p)
180 {
181 	struct pt_regs *c_regs;        /* child's pt_regs */
182 	unsigned long *childksp;       /* to unwind out of __switch_to() */
183 	struct callee_regs *c_callee;  /* child's callee regs */
184 	struct callee_regs *parent_callee;  /* paren't callee */
185 	struct pt_regs *regs = current_pt_regs();
186 
187 	/* Mark the specific anchors to begin with (see pic above) */
188 	c_regs = task_pt_regs(p);
189 	childksp = (unsigned long *)c_regs - 2;  /* 2 words for FP/BLINK */
190 	c_callee = ((struct callee_regs *)childksp) - 1;
191 
192 	/*
193 	 * __switch_to() uses thread.ksp to start unwinding stack
194 	 * For kernel threads we don't need to create callee regs, the
195 	 * stack layout nevertheless needs to remain the same.
196 	 * Also, since __switch_to anyways unwinds callee regs, we use
197 	 * this to populate kernel thread entry-pt/args into callee regs,
198 	 * so that ret_from_kernel_thread() becomes simpler.
199 	 */
200 	p->thread.ksp = (unsigned long)c_callee;	/* THREAD_KSP */
201 
202 	/* __switch_to expects FP(0), BLINK(return addr) at top */
203 	childksp[0] = 0;			/* fp */
204 	childksp[1] = (unsigned long)ret_from_fork; /* blink */
205 
206 	if (unlikely(p->flags & PF_KTHREAD)) {
207 		memset(c_regs, 0, sizeof(struct pt_regs));
208 
209 		c_callee->r13 = kthread_arg;
210 		c_callee->r14 = usp;  /* function */
211 
212 		return 0;
213 	}
214 
215 	/*--------- User Task Only --------------*/
216 
217 	/* __switch_to expects FP(0), BLINK(return addr) at top of stack */
218 	childksp[0] = 0;				/* for POP fp */
219 	childksp[1] = (unsigned long)ret_from_fork;	/* for POP blink */
220 
221 	/* Copy parents pt regs on child's kernel mode stack */
222 	*c_regs = *regs;
223 
224 	if (usp)
225 		c_regs->sp = usp;
226 
227 	c_regs->r0 = 0;		/* fork returns 0 in child */
228 
229 	parent_callee = ((struct callee_regs *)regs) - 1;
230 	*c_callee = *parent_callee;
231 
232 	if (unlikely(clone_flags & CLONE_SETTLS)) {
233 		/*
234 		 * set task's userland tls data ptr from 4th arg
235 		 * clone C-lib call is difft from clone sys-call
236 		 */
237 		task_thread_info(p)->thr_ptr = regs->r3;
238 	} else {
239 		/* Normal fork case: set parent's TLS ptr in child */
240 		task_thread_info(p)->thr_ptr =
241 		task_thread_info(current)->thr_ptr;
242 	}
243 
244 
245 	/*
246 	 * setup usermode thread pointer #1:
247 	 * when child is picked by scheduler, __switch_to() uses @c_callee to
248 	 * populate usermode callee regs: this works (despite being in a kernel
249 	 * function) since special return path for child @ret_from_fork()
250 	 * ensures those regs are not clobbered all the way to RTIE to usermode
251 	 */
252 	c_callee->r25 = task_thread_info(p)->thr_ptr;
253 
254 #ifdef CONFIG_ARC_CURR_IN_REG
255 	/*
256 	 * setup usermode thread pointer #2:
257 	 * however for this special use of r25 in kernel, __switch_to() sets
258 	 * r25 for kernel needs and only in the final return path is usermode
259 	 * r25 setup, from pt_regs->user_r25. So set that up as well
260 	 */
261 	c_regs->user_r25 = c_callee->r25;
262 #endif
263 
264 	return 0;
265 }
266 
267 /*
268  * Do necessary setup to start up a new user task
269  */
270 void start_thread(struct pt_regs * regs, unsigned long pc, unsigned long usp)
271 {
272 	regs->sp = usp;
273 	regs->ret = pc;
274 
275 	/*
276 	 * [U]ser Mode bit set
277 	 * [L] ZOL loop inhibited to begin with - cleared by a LP insn
278 	 * Interrupts enabled
279 	 */
280 	regs->status32 = STATUS_U_MASK | STATUS_L_MASK | ISA_INIT_STATUS_BITS;
281 
282 #ifdef CONFIG_EZNPS_MTM_EXT
283 	regs->eflags = 0;
284 #endif
285 
286 	/* bogus seed values for debugging */
287 	regs->lp_start = 0x10;
288 	regs->lp_end = 0x80;
289 }
290 
291 /*
292  * Some archs flush debug and FPU info here
293  */
294 void flush_thread(void)
295 {
296 }
297 
298 int dump_fpu(struct pt_regs *regs, elf_fpregset_t *fpu)
299 {
300 	return 0;
301 }
302 
303 int elf_check_arch(const struct elf32_hdr *x)
304 {
305 	unsigned int eflags;
306 
307 	if (x->e_machine != EM_ARC_INUSE) {
308 		pr_err("ELF not built for %s ISA\n",
309 			is_isa_arcompact() ? "ARCompact":"ARCv2");
310 		return 0;
311 	}
312 
313 	eflags = x->e_flags;
314 	if ((eflags & EF_ARC_OSABI_MSK) != EF_ARC_OSABI_CURRENT) {
315 		pr_err("ABI mismatch - you need newer toolchain\n");
316 		force_sigsegv(SIGSEGV, current);
317 		return 0;
318 	}
319 
320 	return 1;
321 }
322 EXPORT_SYMBOL(elf_check_arch);
323