xref: /linux/arch/arc/kernel/head.S (revision d198b34f3855eee2571dda03eea75a09c7c31480)
1/* SPDX-License-Identifier: GPL-2.0-only */
2/*
3 * ARC CPU startup Code
4 *
5 * Copyright (C) 2004, 2007-2010, 2011-2012 Synopsys, Inc. (www.synopsys.com)
6 *
7 * Vineetg: Dec 2007
8 *  -Check if we are running on Simulator or on real hardware
9 *      to skip certain things during boot on simulator
10 */
11
12#include <linux/linkage.h>
13#include <asm/asm-offsets.h>
14#include <asm/entry.h>
15#include <asm/arcregs.h>
16#include <asm/cache.h>
17#include <asm/irqflags.h>
18
19.macro CPU_EARLY_SETUP
20
21	; Setting up Vectror Table (in case exception happens in early boot
22	sr	@_int_vec_base_lds, [AUX_INTR_VEC_BASE]
23
24	; Disable I-cache/D-cache if kernel so configured
25	lr	r5, [ARC_REG_IC_BCR]
26	breq    r5, 0, 1f		; I$ doesn't exist
27	lr	r5, [ARC_REG_IC_CTRL]
28#ifdef CONFIG_ARC_HAS_ICACHE
29	bclr	r5, r5, 0		; 0 - Enable, 1 is Disable
30#else
31	bset	r5, r5, 0		; I$ exists, but is not used
32#endif
33	sr	r5, [ARC_REG_IC_CTRL]
34
351:
36	lr	r5, [ARC_REG_DC_BCR]
37	breq    r5, 0, 1f		; D$ doesn't exist
38	lr	r5, [ARC_REG_DC_CTRL]
39	bclr	r5, r5, 6		; Invalidate (discard w/o wback)
40#ifdef CONFIG_ARC_HAS_DCACHE
41	bclr	r5, r5, 0		; Enable (+Inv)
42#else
43	bset	r5, r5, 0		; Disable (+Inv)
44#endif
45	sr	r5, [ARC_REG_DC_CTRL]
46
471:
48
49#ifdef CONFIG_ISA_ARCV2
50	; Unaligned access is disabled at reset, so re-enable early as
51	; gcc 7.3.1 (ARC GNU 2018.03) onwards generates unaligned access
52	; by default
53	lr	r5, [status32]
54#ifdef CONFIG_ARC_USE_UNALIGNED_MEM_ACCESS
55	bset	r5, r5, STATUS_AD_BIT
56#else
57	; Although disabled at reset, bootloader might have enabled it
58	bclr	r5, r5, STATUS_AD_BIT
59#endif
60	kflag	r5
61#endif
62.endm
63
64	.section .init.text, "ax",@progbits
65
66;----------------------------------------------------------------
67; Default Reset Handler (jumped into from Reset vector)
68; - Don't clobber r0,r1,r2 as they might have u-boot provided args
69; - Platforms can override this weak version if needed
70;----------------------------------------------------------------
71WEAK(res_service)
72	j	stext
73END(res_service)
74
75;----------------------------------------------------------------
76; Kernel Entry point
77;----------------------------------------------------------------
78ENTRY(stext)
79
80	CPU_EARLY_SETUP
81
82#ifdef CONFIG_SMP
83	GET_CPU_ID  r5
84	cmp	r5, 0
85	mov.nz	r0, r5
86	bz	.Lmaster_proceed
87
88	; Non-Masters wait for Master to boot enough and bring them up
89	; when they resume, tail-call to entry point
90	mov	blink, @first_lines_of_secondary
91	j	arc_platform_smp_wait_to_boot
92
93.Lmaster_proceed:
94#endif
95
96	; Clear BSS before updating any globals
97	; XXX: use ZOL here
98	mov	r5, __bss_start
99	sub	r6, __bss_stop, r5
100	lsr.f	lp_count, r6, 2
101	lpnz	1f
102	st.ab   0, [r5, 4]
1031:
104
105	; Uboot - kernel ABI
106	;    r0 = [0] No uboot interaction, [1] cmdline in r2, [2] DTB in r2
107	;    r1 = magic number (always zero as of now)
108	;    r2 = pointer to uboot provided cmdline or external DTB in mem
109	; These are handled later in handle_uboot_args()
110	st	r0, [@uboot_tag]
111	st      r1, [@uboot_magic]
112	st	r2, [@uboot_arg]
113
114	; setup "current" tsk and optionally cache it in dedicated r25
115	mov	r9, @init_task
116	SET_CURR_TASK_ON_CPU  r9, r0	; r9 = tsk, r0 = scratch
117
118	; setup stack (fp, sp)
119	mov	fp, 0
120
121	; tsk->thread_info is really a PAGE, whose bottom hoists stack
122	GET_TSK_STACK_BASE r9, sp	; r9 = tsk, sp = stack base(output)
123
124	j	start_kernel	; "C" entry point
125END(stext)
126
127#ifdef CONFIG_SMP
128;----------------------------------------------------------------
129;     First lines of code run by secondary before jumping to 'C'
130;----------------------------------------------------------------
131	.section .text, "ax",@progbits
132ENTRY(first_lines_of_secondary)
133
134	; setup per-cpu idle task as "current" on this CPU
135	ld	r0, [@secondary_idle_tsk]
136	SET_CURR_TASK_ON_CPU  r0, r1
137
138	; setup stack (fp, sp)
139	mov	fp, 0
140
141	; set it's stack base to tsk->thread_info bottom
142	GET_TSK_STACK_BASE r0, sp
143
144	j	start_kernel_secondary
145END(first_lines_of_secondary)
146#endif
147