1// SPDX-License-Identifier: GPL-2.0-only 2/* 3 * Copyright (C) 2014, 2015 Synopsys, Inc. (www.synopsys.com) 4 */ 5 6/* 7 * Device tree for AXC003 CPU card: HS38x2 (Dual Core) with IDU intc 8 */ 9 10/include/ "skeleton_hs_idu.dtsi" 11 12/ { 13 compatible = "snps,arc"; 14 #address-cells = <2>; 15 #size-cells = <2>; 16 17 cpu_card { 18 compatible = "simple-bus"; 19 #address-cells = <1>; 20 #size-cells = <1>; 21 22 ranges = <0x00000000 0x0 0xf0000000 0x10000000>; 23 24 input_clk: input-clk { 25 #clock-cells = <0>; 26 compatible = "fixed-clock"; 27 clock-frequency = <33333333>; 28 }; 29 30 core_clk: core-clk@80 { 31 compatible = "snps,axs10x-arc-pll-clock"; 32 reg = <0x80 0x10>, <0x100 0x10>; 33 #clock-cells = <0>; 34 clocks = <&input_clk>; 35 36 /* 37 * Set initial core pll output frequency to 100MHz. 38 * It will be applied at the core pll driver probing 39 * on early boot. 40 */ 41 assigned-clocks = <&core_clk>; 42 assigned-clock-rates = <100000000>; 43 }; 44 45 core_intc: archs-intc@cpu { 46 compatible = "snps,archs-intc"; 47 interrupt-controller; 48 #interrupt-cells = <1>; 49 }; 50 51 idu_intc: idu-interrupt-controller { 52 compatible = "snps,archs-idu-intc"; 53 interrupt-controller; 54 interrupt-parent = <&core_intc>; 55 #interrupt-cells = <1>; 56 }; 57 58 /* 59 * this GPIO block ORs all interrupts on CPU card (creg,..) 60 * to uplink only 1 IRQ to ARC core intc 61 */ 62 dw-apb-gpio@2000 { 63 compatible = "snps,dw-apb-gpio"; 64 reg = < 0x2000 0x80 >; 65 #address-cells = <1>; 66 #size-cells = <0>; 67 68 ictl_intc: gpio-controller@0 { 69 compatible = "snps,dw-apb-gpio-port"; 70 gpio-controller; 71 #gpio-cells = <2>; 72 snps,nr-gpios = <30>; 73 reg = <0>; 74 interrupt-controller; 75 #interrupt-cells = <2>; 76 interrupt-parent = <&idu_intc>; 77 interrupts = <1>; 78 }; 79 }; 80 81 debug_uart: dw-apb-uart@5000 { 82 compatible = "snps,dw-apb-uart"; 83 reg = <0x5000 0x100>; 84 clock-frequency = <33333000>; 85 interrupt-parent = <&ictl_intc>; 86 interrupts = <2 4>; 87 baud = <115200>; 88 reg-shift = <2>; 89 reg-io-width = <4>; 90 }; 91 92 arcpct0: pct { 93 compatible = "snps,archs-pct"; 94 #interrupt-cells = <1>; 95 interrupt-parent = <&core_intc>; 96 interrupts = <20>; 97 }; 98 }; 99 100 /* 101 * Mark DMA peripherals connected via IOC port as dma-coherent. We do 102 * it via overlay because peripherals defined in axs10x_mb.dtsi are 103 * used for both AXS101 and AXS103 boards and only AXS103 has IOC (so 104 * only AXS103 board has HW-coherent DMA peripherals) 105 * We don't need to mark pgu@17000 as dma-coherent because it uses 106 * external DMA buffer located outside of IOC aperture. 107 */ 108 axs10x_mb { 109 ethernet@18000 { 110 dma-coherent; 111 }; 112 113 ehci@40000 { 114 dma-coherent; 115 }; 116 117 ohci@60000 { 118 dma-coherent; 119 }; 120 121 mmc@15000 { 122 dma-coherent; 123 }; 124 }; 125 126 /* 127 * This INTC is actually connected to DW APB GPIO 128 * which acts as a wire between MB INTC and CPU INTC. 129 * GPIO INTC is configured in platform init code 130 * and here we mimic direct connection from MB INTC to 131 * CPU INTC, thus we set "interrupts = <0 1>" instead of 132 * "interrupts = <12>" 133 * 134 * This intc actually resides on MB, but we move it here to 135 * avoid duplicating the MB dtsi file given that IRQ from 136 * this intc to cpu intc are different for axs101 and axs103 137 */ 138 mb_intc: dw-apb-ictl@e0012000 { 139 #interrupt-cells = <1>; 140 compatible = "snps,dw-apb-ictl"; 141 reg = < 0x0 0xe0012000 0x0 0x200 >; 142 interrupt-controller; 143 interrupt-parent = <&idu_intc>; 144 interrupts = <0>; 145 }; 146 147 memory { 148 device_type = "memory"; 149 /* CONFIG_LINUX_RAM_BASE needs to match low mem start */ 150 reg = <0x0 0x80000000 0x0 0x20000000 /* 512 MiB low mem */ 151 0x1 0xc0000000 0x0 0x40000000>; /* 1 GiB highmem */ 152 }; 153 154 reserved-memory { 155 #address-cells = <2>; 156 #size-cells = <2>; 157 ranges; 158 /* 159 * Move frame buffer out of IOC aperture (0x8z-0xaz). 160 */ 161 frame_buffer: frame_buffer@be000000 { 162 compatible = "shared-dma-pool"; 163 reg = <0x0 0xbe000000 0x0 0x2000000>; 164 no-map; 165 }; 166 }; 167}; 168