1# 2# Copyright (C) 2004, 2007-2010, 2011-2012 Synopsys, Inc. (www.synopsys.com) 3# 4# This program is free software; you can redistribute it and/or modify 5# it under the terms of the GNU General Public License version 2 as 6# published by the Free Software Foundation. 7# 8 9config ARC 10 def_bool y 11 select ARC_TIMERS 12 select ARCH_HAS_SG_CHAIN 13 select ARCH_SUPPORTS_ATOMIC_RMW if ARC_HAS_LLSC 14 select BUILDTIME_EXTABLE_SORT 15 select CLONE_BACKWARDS 16 select COMMON_CLK 17 select GENERIC_ATOMIC64 if !ISA_ARCV2 || !(ARC_HAS_LL64 && ARC_HAS_LLSC) 18 select GENERIC_CLOCKEVENTS 19 select GENERIC_FIND_FIRST_BIT 20 # for now, we don't need GENERIC_IRQ_PROBE, CONFIG_GENERIC_IRQ_CHIP 21 select GENERIC_IRQ_SHOW 22 select GENERIC_PCI_IOMAP 23 select GENERIC_PENDING_IRQ if SMP 24 select GENERIC_SMP_IDLE_THREAD 25 select HAVE_ARCH_KGDB 26 select HAVE_ARCH_TRACEHOOK 27 select HAVE_FUTEX_CMPXCHG if FUTEX 28 select HAVE_IOREMAP_PROT 29 select HAVE_KPROBES 30 select HAVE_KRETPROBES 31 select HAVE_MEMBLOCK 32 select HAVE_MOD_ARCH_SPECIFIC 33 select HAVE_OPROFILE 34 select HAVE_PERF_EVENTS 35 select HANDLE_DOMAIN_IRQ 36 select IRQ_DOMAIN 37 select MODULES_USE_ELF_RELA 38 select NO_BOOTMEM 39 select OF 40 select OF_EARLY_FLATTREE 41 select OF_RESERVED_MEM 42 select PERF_USE_VMALLOC if ARC_CACHE_VIPT_ALIASING 43 select HAVE_DEBUG_STACKOVERFLOW 44 select HAVE_GENERIC_DMA_COHERENT 45 select HAVE_KERNEL_GZIP 46 select HAVE_KERNEL_LZMA 47 48config MIGHT_HAVE_PCI 49 bool 50 51config TRACE_IRQFLAGS_SUPPORT 52 def_bool y 53 54config LOCKDEP_SUPPORT 55 def_bool y 56 57config SCHED_OMIT_FRAME_POINTER 58 def_bool y 59 60config GENERIC_CSUM 61 def_bool y 62 63config RWSEM_GENERIC_SPINLOCK 64 def_bool y 65 66config ARCH_DISCONTIGMEM_ENABLE 67 def_bool n 68 69config ARCH_FLATMEM_ENABLE 70 def_bool y 71 72config MMU 73 def_bool y 74 75config NO_IOPORT_MAP 76 def_bool y 77 78config GENERIC_CALIBRATE_DELAY 79 def_bool y 80 81config GENERIC_HWEIGHT 82 def_bool y 83 84config STACKTRACE_SUPPORT 85 def_bool y 86 select STACKTRACE 87 88config HAVE_ARCH_TRANSPARENT_HUGEPAGE 89 def_bool y 90 depends on ARC_MMU_V4 91 92source "init/Kconfig" 93source "kernel/Kconfig.freezer" 94 95menu "ARC Architecture Configuration" 96 97menu "ARC Platform/SoC/Board" 98 99source "arch/arc/plat-tb10x/Kconfig" 100source "arch/arc/plat-axs10x/Kconfig" 101#New platform adds here 102source "arch/arc/plat-eznps/Kconfig" 103source "arch/arc/plat-hsdk/Kconfig" 104 105endmenu 106 107choice 108 prompt "ARC Instruction Set" 109 default ISA_ARCOMPACT 110 111config ISA_ARCOMPACT 112 bool "ARCompact ISA" 113 select CPU_NO_EFFICIENT_FFS 114 help 115 The original ARC ISA of ARC600/700 cores 116 117config ISA_ARCV2 118 bool "ARC ISA v2" 119 select ARC_TIMERS_64BIT 120 help 121 ISA for the Next Generation ARC-HS cores 122 123endchoice 124 125menu "ARC CPU Configuration" 126 127choice 128 prompt "ARC Core" 129 default ARC_CPU_770 if ISA_ARCOMPACT 130 default ARC_CPU_HS if ISA_ARCV2 131 132if ISA_ARCOMPACT 133 134config ARC_CPU_750D 135 bool "ARC750D" 136 select ARC_CANT_LLSC 137 help 138 Support for ARC750 core 139 140config ARC_CPU_770 141 bool "ARC770" 142 select ARC_HAS_SWAPE 143 help 144 Support for ARC770 core introduced with Rel 4.10 (Summer 2011) 145 This core has a bunch of cool new features: 146 -MMU-v3: Variable Page Sz (4k, 8k, 16k), bigger J-TLB (128x4) 147 Shared Address Spaces (for sharing TLB entires in MMU) 148 -Caches: New Prog Model, Region Flush 149 -Insns: endian swap, load-locked/store-conditional, time-stamp-ctr 150 151endif #ISA_ARCOMPACT 152 153config ARC_CPU_HS 154 bool "ARC-HS" 155 depends on ISA_ARCV2 156 help 157 Support for ARC HS38x Cores based on ARCv2 ISA 158 The notable features are: 159 - SMP configurations of upto 4 core with coherency 160 - Optional L2 Cache and IO-Coherency 161 - Revised Interrupt Architecture (multiple priorites, reg banks, 162 auto stack switch, auto regfile save/restore) 163 - MMUv4 (PIPT dcache, Huge Pages) 164 - Instructions for 165 * 64bit load/store: LDD, STD 166 * Hardware assisted divide/remainder: DIV, REM 167 * Function prologue/epilogue: ENTER_S, LEAVE_S 168 * IRQ enable/disable: CLRI, SETI 169 * pop count: FFS, FLS 170 * SETcc, BMSKN, XBFU... 171 172endchoice 173 174config CPU_BIG_ENDIAN 175 bool "Enable Big Endian Mode" 176 default n 177 help 178 Build kernel for Big Endian Mode of ARC CPU 179 180config SMP 181 bool "Symmetric Multi-Processing" 182 default n 183 select ARC_MCIP if ISA_ARCV2 184 help 185 This enables support for systems with more than one CPU. 186 187if SMP 188 189config NR_CPUS 190 int "Maximum number of CPUs (2-4096)" 191 range 2 4096 192 default "4" 193 194config ARC_SMP_HALT_ON_RESET 195 bool "Enable Halt-on-reset boot mode" 196 default y if ARC_UBOOT_SUPPORT 197 help 198 In SMP configuration cores can be configured as Halt-on-reset 199 or they could all start at same time. For Halt-on-reset, non 200 masters are parked until Master kicks them so they can start of 201 at designated entry point. For other case, all jump to common 202 entry point and spin wait for Master's signal. 203 204endif #SMP 205 206config ARC_MCIP 207 bool "ARConnect Multicore IP (MCIP) Support " 208 depends on ISA_ARCV2 209 default y if SMP 210 help 211 This IP block enables SMP in ARC-HS38 cores. 212 It provides for cross-core interrupts, multi-core debug 213 hardware semaphores, shared memory,.... 214 215menuconfig ARC_CACHE 216 bool "Enable Cache Support" 217 default y 218 219if ARC_CACHE 220 221config ARC_CACHE_LINE_SHIFT 222 int "Cache Line Length (as power of 2)" 223 range 5 7 224 default "6" 225 help 226 Starting with ARC700 4.9, Cache line length is configurable, 227 This option specifies "N", with Line-len = 2 power N 228 So line lengths of 32, 64, 128 are specified by 5,6,7, respectively 229 Linux only supports same line lengths for I and D caches. 230 231config ARC_HAS_ICACHE 232 bool "Use Instruction Cache" 233 default y 234 235config ARC_HAS_DCACHE 236 bool "Use Data Cache" 237 default y 238 239config ARC_CACHE_PAGES 240 bool "Per Page Cache Control" 241 default y 242 depends on ARC_HAS_ICACHE || ARC_HAS_DCACHE 243 help 244 This can be used to over-ride the global I/D Cache Enable on a 245 per-page basis (but only for pages accessed via MMU such as 246 Kernel Virtual address or User Virtual Address) 247 TLB entries have a per-page Cache Enable Bit. 248 Note that Global I/D ENABLE + Per Page DISABLE works but corollary 249 Global DISABLE + Per Page ENABLE won't work 250 251config ARC_CACHE_VIPT_ALIASING 252 bool "Support VIPT Aliasing D$" 253 depends on ARC_HAS_DCACHE && ISA_ARCOMPACT 254 default n 255 256endif #ARC_CACHE 257 258config ARC_HAS_ICCM 259 bool "Use ICCM" 260 help 261 Single Cycle RAMS to store Fast Path Code 262 default n 263 264config ARC_ICCM_SZ 265 int "ICCM Size in KB" 266 default "64" 267 depends on ARC_HAS_ICCM 268 269config ARC_HAS_DCCM 270 bool "Use DCCM" 271 help 272 Single Cycle RAMS to store Fast Path Data 273 default n 274 275config ARC_DCCM_SZ 276 int "DCCM Size in KB" 277 default "64" 278 depends on ARC_HAS_DCCM 279 280config ARC_DCCM_BASE 281 hex "DCCM map address" 282 default "0xA0000000" 283 depends on ARC_HAS_DCCM 284 285choice 286 prompt "MMU Version" 287 default ARC_MMU_V3 if ARC_CPU_770 288 default ARC_MMU_V2 if ARC_CPU_750D 289 default ARC_MMU_V4 if ARC_CPU_HS 290 291if ISA_ARCOMPACT 292 293config ARC_MMU_V1 294 bool "MMU v1" 295 help 296 Orig ARC700 MMU 297 298config ARC_MMU_V2 299 bool "MMU v2" 300 help 301 Fixed the deficiency of v1 - possible thrashing in memcpy scenario 302 when 2 D-TLB and 1 I-TLB entries index into same 2way set. 303 304config ARC_MMU_V3 305 bool "MMU v3" 306 depends on ARC_CPU_770 307 help 308 Introduced with ARC700 4.10: New Features 309 Variable Page size (1k-16k), var JTLB size 128 x (2 or 4) 310 Shared Address Spaces (SASID) 311 312endif 313 314config ARC_MMU_V4 315 bool "MMU v4" 316 depends on ISA_ARCV2 317 318endchoice 319 320 321choice 322 prompt "MMU Page Size" 323 default ARC_PAGE_SIZE_8K 324 325config ARC_PAGE_SIZE_8K 326 bool "8KB" 327 help 328 Choose between 8k vs 16k 329 330config ARC_PAGE_SIZE_16K 331 bool "16KB" 332 depends on ARC_MMU_V3 || ARC_MMU_V4 333 334config ARC_PAGE_SIZE_4K 335 bool "4KB" 336 depends on ARC_MMU_V3 || ARC_MMU_V4 337 338endchoice 339 340choice 341 prompt "MMU Super Page Size" 342 depends on ISA_ARCV2 && TRANSPARENT_HUGEPAGE 343 default ARC_HUGEPAGE_2M 344 345config ARC_HUGEPAGE_2M 346 bool "2MB" 347 348config ARC_HUGEPAGE_16M 349 bool "16MB" 350 351endchoice 352 353config NODES_SHIFT 354 int "Maximum NUMA Nodes (as a power of 2)" 355 default "0" if !DISCONTIGMEM 356 default "1" if DISCONTIGMEM 357 depends on NEED_MULTIPLE_NODES 358 ---help--- 359 Accessing memory beyond 1GB (with or w/o PAE) requires 2 memory 360 zones. 361 362if ISA_ARCOMPACT 363 364config ARC_COMPACT_IRQ_LEVELS 365 bool "Setup Timer IRQ as high Priority" 366 default n 367 # if SMP, LV2 enabled ONLY if ARC implementation has LV2 re-entrancy 368 depends on !SMP 369 370config ARC_FPU_SAVE_RESTORE 371 bool "Enable FPU state persistence across context switch" 372 default n 373 help 374 Double Precision Floating Point unit had dedicated regs which 375 need to be saved/restored across context-switch. 376 Note that ARC FPU is overly simplistic, unlike say x86, which has 377 hardware pieces to allow software to conditionally save/restore, 378 based on actual usage of FPU by a task. Thus our implemn does 379 this for all tasks in system. 380 381endif #ISA_ARCOMPACT 382 383config ARC_CANT_LLSC 384 def_bool n 385 386config ARC_HAS_LLSC 387 bool "Insn: LLOCK/SCOND (efficient atomic ops)" 388 default y 389 depends on !ARC_CANT_LLSC 390 391config ARC_HAS_SWAPE 392 bool "Insn: SWAPE (endian-swap)" 393 default y 394 395if ISA_ARCV2 396 397config ARC_HAS_LL64 398 bool "Insn: 64bit LDD/STD" 399 help 400 Enable gcc to generate 64-bit load/store instructions 401 ISA mandates even/odd registers to allow encoding of two 402 dest operands with 2 possible source operands. 403 default y 404 405config ARC_HAS_DIV_REM 406 bool "Insn: div, divu, rem, remu" 407 default y 408 409config ARC_HAS_ACCL_REGS 410 bool "Reg Pair ACCL:ACCH (FPU and/or MPY > 6)" 411 default n 412 help 413 Depending on the configuration, CPU can contain accumulator reg-pair 414 (also referred to as r58:r59). These can also be used by gcc as GPR so 415 kernel needs to save/restore per process 416 417endif # ISA_ARCV2 418 419endmenu # "ARC CPU Configuration" 420 421config LINUX_LINK_BASE 422 hex "Kernel link address" 423 default "0x80000000" 424 help 425 ARC700 divides the 32 bit phy address space into two equal halves 426 -Lower 2G (0 - 0x7FFF_FFFF ) is user virtual, translated by MMU 427 -Upper 2G (0x8000_0000 onwards) is untranslated, for kernel 428 Typically Linux kernel is linked at the start of untransalted addr, 429 hence the default value of 0x8zs. 430 However some customers have peripherals mapped at this addr, so 431 Linux needs to be scooted a bit. 432 If you don't know what the above means, leave this setting alone. 433 This needs to match memory start address specified in Device Tree 434 435config LINUX_RAM_BASE 436 hex "RAM base address" 437 default LINUX_LINK_BASE 438 help 439 By default Linux is linked at base of RAM. However in some special 440 cases (such as HSDK), Linux can't be linked at start of DDR, hence 441 this option. 442 443config HIGHMEM 444 bool "High Memory Support" 445 select ARCH_DISCONTIGMEM_ENABLE 446 help 447 With ARC 2G:2G address split, only upper 2G is directly addressable by 448 kernel. Enable this to potentially allow access to rest of 2G and PAE 449 in future 450 451config ARC_HAS_PAE40 452 bool "Support for the 40-bit Physical Address Extension" 453 default n 454 depends on ISA_ARCV2 455 select HIGHMEM 456 help 457 Enable access to physical memory beyond 4G, only supported on 458 ARC cores with 40 bit Physical Addressing support 459 460config ARCH_PHYS_ADDR_T_64BIT 461 def_bool ARC_HAS_PAE40 462 463config ARCH_DMA_ADDR_T_64BIT 464 bool 465 466config ARC_KVADDR_SIZE 467 int "Kernel Virtual Address Space size (MB)" 468 range 0 512 469 default "256" 470 help 471 The kernel address space is carved out of 256MB of translated address 472 space for catering to vmalloc, modules, pkmap, fixmap. This however may 473 not suffice vmalloc requirements of a 4K CPU EZChip system. So allow 474 this to be stretched to 512 MB (by extending into the reserved 475 kernel-user gutter) 476 477config ARC_CURR_IN_REG 478 bool "Dedicate Register r25 for current_task pointer" 479 default y 480 help 481 This reserved Register R25 to point to Current Task in 482 kernel mode. This saves memory access for each such access 483 484 485config ARC_EMUL_UNALIGNED 486 bool "Emulate unaligned memory access (userspace only)" 487 select SYSCTL_ARCH_UNALIGN_NO_WARN 488 select SYSCTL_ARCH_UNALIGN_ALLOW 489 depends on ISA_ARCOMPACT 490 help 491 This enables misaligned 16 & 32 bit memory access from user space. 492 Use ONLY-IF-ABS-NECESSARY as it will be very slow and also can hide 493 potential bugs in code 494 495config HZ 496 int "Timer Frequency" 497 default 100 498 499config ARC_METAWARE_HLINK 500 bool "Support for Metaware debugger assisted Host access" 501 default n 502 help 503 This options allows a Linux userland apps to directly access 504 host file system (open/creat/read/write etc) with help from 505 Metaware Debugger. This can come in handy for Linux-host communication 506 when there is no real usable peripheral such as EMAC. 507 508menuconfig ARC_DBG 509 bool "ARC debugging" 510 default y 511 512if ARC_DBG 513 514config ARC_DW2_UNWIND 515 bool "Enable DWARF specific kernel stack unwind" 516 default y 517 select KALLSYMS 518 help 519 Compiles the kernel with DWARF unwind information and can be used 520 to get stack backtraces. 521 522 If you say Y here the resulting kernel image will be slightly larger 523 but not slower, and it will give very useful debugging information. 524 If you don't debug the kernel, you can say N, but we may not be able 525 to solve problems without frame unwind information 526 527config ARC_DBG_TLB_PARANOIA 528 bool "Paranoia Checks in Low Level TLB Handlers" 529 default n 530 531endif 532 533config ARC_UBOOT_SUPPORT 534 bool "Support uboot arg Handling" 535 default n 536 help 537 ARC Linux by default checks for uboot provided args as pointers to 538 external cmdline or DTB. This however breaks in absence of uboot, 539 when booting from Metaware debugger directly, as the registers are 540 not zeroed out on reset by mdb and/or ARCv2 based cores. The bogus 541 registers look like uboot args to kernel which then chokes. 542 So only enable the uboot arg checking/processing if users are sure 543 of uboot being in play. 544 545config ARC_BUILTIN_DTB_NAME 546 string "Built in DTB" 547 help 548 Set the name of the DTB to embed in the vmlinux binary 549 Leaving it blank selects the minimal "skeleton" dtb 550 551source "kernel/Kconfig.preempt" 552 553menu "Executable file formats" 554source "fs/Kconfig.binfmt" 555endmenu 556 557endmenu # "ARC Architecture Configuration" 558 559source "mm/Kconfig" 560 561config FORCE_MAX_ZONEORDER 562 int "Maximum zone order" 563 default "12" if ARC_HUGEPAGE_16M 564 default "11" 565 566source "net/Kconfig" 567source "drivers/Kconfig" 568 569menu "Bus Support" 570 571config PCI 572 bool "PCI support" if MIGHT_HAVE_PCI 573 help 574 PCI is the name of a bus system, i.e., the way the CPU talks to 575 the other stuff inside your box. Find out if your board/platform 576 has PCI. 577 578 Note: PCIe support for Synopsys Device will be available only 579 when HAPS DX is configured with PCIe RC bitmap. If you have PCI, 580 say Y, otherwise N. 581 582config PCI_SYSCALL 583 def_bool PCI 584 585source "drivers/pci/Kconfig" 586 587endmenu 588 589source "fs/Kconfig" 590source "arch/arc/Kconfig.debug" 591source "security/Kconfig" 592source "crypto/Kconfig" 593source "lib/Kconfig" 594source "kernel/power/Kconfig" 595