1 /* 2 * linux/arch/alpha/kernel/sys_rx164.c 3 * 4 * Copyright (C) 1995 David A Rusling 5 * Copyright (C) 1996 Jay A Estabrook 6 * Copyright (C) 1998, 1999 Richard Henderson 7 * 8 * Code supporting the RX164 (PCA56+POLARIS). 9 */ 10 11 #include <linux/kernel.h> 12 #include <linux/types.h> 13 #include <linux/mm.h> 14 #include <linux/sched.h> 15 #include <linux/pci.h> 16 #include <linux/init.h> 17 #include <linux/bitops.h> 18 19 #include <asm/ptrace.h> 20 #include <asm/system.h> 21 #include <asm/dma.h> 22 #include <asm/irq.h> 23 #include <asm/mmu_context.h> 24 #include <asm/io.h> 25 #include <asm/pgtable.h> 26 #include <asm/core_polaris.h> 27 #include <asm/tlbflush.h> 28 29 #include "proto.h" 30 #include "irq_impl.h" 31 #include "pci_impl.h" 32 #include "machvec_impl.h" 33 34 35 /* Note mask bit is true for ENABLED irqs. */ 36 static unsigned long cached_irq_mask; 37 38 static inline void 39 rx164_update_irq_hw(unsigned long mask) 40 { 41 volatile unsigned int *irq_mask; 42 43 irq_mask = (void *)(POLARIS_DENSE_CONFIG_BASE + 0x74); 44 *irq_mask = mask; 45 mb(); 46 *irq_mask; 47 } 48 49 static inline void 50 rx164_enable_irq(unsigned int irq) 51 { 52 rx164_update_irq_hw(cached_irq_mask |= 1UL << (irq - 16)); 53 } 54 55 static void 56 rx164_disable_irq(unsigned int irq) 57 { 58 rx164_update_irq_hw(cached_irq_mask &= ~(1UL << (irq - 16))); 59 } 60 61 static unsigned int 62 rx164_startup_irq(unsigned int irq) 63 { 64 rx164_enable_irq(irq); 65 return 0; 66 } 67 68 static void 69 rx164_end_irq(unsigned int irq) 70 { 71 if (!(irq_desc[irq].status & (IRQ_DISABLED|IRQ_INPROGRESS))) 72 rx164_enable_irq(irq); 73 } 74 75 static struct hw_interrupt_type rx164_irq_type = { 76 .typename = "RX164", 77 .startup = rx164_startup_irq, 78 .shutdown = rx164_disable_irq, 79 .enable = rx164_enable_irq, 80 .disable = rx164_disable_irq, 81 .ack = rx164_disable_irq, 82 .end = rx164_end_irq, 83 }; 84 85 static void 86 rx164_device_interrupt(unsigned long vector) 87 { 88 unsigned long pld; 89 volatile unsigned int *dirr; 90 long i; 91 92 /* Read the interrupt summary register. On Polaris, this is 93 the DIRR register in PCI config space (offset 0x84). */ 94 dirr = (void *)(POLARIS_DENSE_CONFIG_BASE + 0x84); 95 pld = *dirr; 96 97 /* 98 * Now for every possible bit set, work through them and call 99 * the appropriate interrupt handler. 100 */ 101 while (pld) { 102 i = ffz(~pld); 103 pld &= pld - 1; /* clear least bit set */ 104 if (i == 20) { 105 isa_no_iack_sc_device_interrupt(vector); 106 } else { 107 handle_irq(16+i); 108 } 109 } 110 } 111 112 static void __init 113 rx164_init_irq(void) 114 { 115 long i; 116 117 rx164_update_irq_hw(0); 118 for (i = 16; i < 40; ++i) { 119 irq_desc[i].status = IRQ_DISABLED | IRQ_LEVEL; 120 irq_desc[i].chip = &rx164_irq_type; 121 } 122 123 init_i8259a_irqs(); 124 common_init_isa_dma(); 125 126 setup_irq(16+20, &isa_cascade_irqaction); 127 } 128 129 130 /* 131 * The RX164 changed its interrupt routing between pass1 and pass2... 132 * 133 * PASS1: 134 * 135 * Slot IDSEL INTA INTB INTC INTD 136 * 0 6 5 10 15 20 137 * 1 7 4 9 14 19 138 * 2 5 3 8 13 18 139 * 3 9 2 7 12 17 140 * 4 10 1 6 11 16 141 * 142 * PASS2: 143 * Slot IDSEL INTA INTB INTC INTD 144 * 0 5 1 7 12 17 145 * 1 6 2 8 13 18 146 * 2 8 3 9 14 19 147 * 3 9 4 10 15 20 148 * 4 10 5 11 16 6 149 * 150 */ 151 152 /* 153 * IdSel 154 * 5 32 bit PCI option slot 0 155 * 6 64 bit PCI option slot 1 156 * 7 PCI-ISA bridge 157 * 7 64 bit PCI option slot 2 158 * 9 32 bit PCI option slot 3 159 * 10 PCI-PCI bridge 160 * 161 */ 162 163 static int __init 164 rx164_map_irq(struct pci_dev *dev, u8 slot, u8 pin) 165 { 166 #if 0 167 static char irq_tab_pass1[6][5] __initdata = { 168 /*INT INTA INTB INTC INTD */ 169 { 16+3, 16+3, 16+8, 16+13, 16+18}, /* IdSel 5, slot 2 */ 170 { 16+5, 16+5, 16+10, 16+15, 16+20}, /* IdSel 6, slot 0 */ 171 { 16+4, 16+4, 16+9, 16+14, 16+19}, /* IdSel 7, slot 1 */ 172 { -1, -1, -1, -1, -1}, /* IdSel 8, PCI/ISA bridge */ 173 { 16+2, 16+2, 16+7, 16+12, 16+17}, /* IdSel 9, slot 3 */ 174 { 16+1, 16+1, 16+6, 16+11, 16+16}, /* IdSel 10, slot 4 */ 175 }; 176 #else 177 static char irq_tab[6][5] __initdata = { 178 /*INT INTA INTB INTC INTD */ 179 { 16+0, 16+0, 16+6, 16+11, 16+16}, /* IdSel 5, slot 0 */ 180 { 16+1, 16+1, 16+7, 16+12, 16+17}, /* IdSel 6, slot 1 */ 181 { -1, -1, -1, -1, -1}, /* IdSel 7, PCI/ISA bridge */ 182 { 16+2, 16+2, 16+8, 16+13, 16+18}, /* IdSel 8, slot 2 */ 183 { 16+3, 16+3, 16+9, 16+14, 16+19}, /* IdSel 9, slot 3 */ 184 { 16+4, 16+4, 16+10, 16+15, 16+5}, /* IdSel 10, PCI-PCI */ 185 }; 186 #endif 187 const long min_idsel = 5, max_idsel = 10, irqs_per_slot = 5; 188 189 /* JRP - Need to figure out how to distinguish pass1 from pass2, 190 and use the correct table. */ 191 return COMMON_TABLE_LOOKUP; 192 } 193 194 195 /* 196 * The System Vector 197 */ 198 199 struct alpha_machine_vector rx164_mv __initmv = { 200 .vector_name = "RX164", 201 DO_EV5_MMU, 202 DO_DEFAULT_RTC, 203 DO_POLARIS_IO, 204 .machine_check = polaris_machine_check, 205 .max_isa_dma_address = ALPHA_MAX_ISA_DMA_ADDRESS, 206 .min_io_address = DEFAULT_IO_BASE, 207 .min_mem_address = DEFAULT_MEM_BASE, 208 209 .nr_irqs = 40, 210 .device_interrupt = rx164_device_interrupt, 211 212 .init_arch = polaris_init_arch, 213 .init_irq = rx164_init_irq, 214 .init_rtc = common_init_rtc, 215 .init_pci = common_init_pci, 216 .kill_arch = NULL, 217 .pci_map_irq = rx164_map_irq, 218 .pci_swizzle = common_swizzle, 219 }; 220 ALIAS_MV(rx164) 221