1 // SPDX-License-Identifier: GPL-2.0 2 /* 3 * linux/arch/alpha/kernel/sys_nautilus.c 4 * 5 * Copyright (C) 1995 David A Rusling 6 * Copyright (C) 1998 Richard Henderson 7 * Copyright (C) 1999 Alpha Processor, Inc., 8 * (David Daniel, Stig Telfer, Soohoon Lee) 9 * 10 * Code supporting NAUTILUS systems. 11 * 12 * 13 * NAUTILUS has the following I/O features: 14 * 15 * a) Driven by AMD 751 aka IRONGATE (northbridge): 16 * 4 PCI slots 17 * 1 AGP slot 18 * 19 * b) Driven by ALI M1543C (southbridge) 20 * 2 ISA slots 21 * 2 IDE connectors 22 * 1 dual drive capable FDD controller 23 * 2 serial ports 24 * 1 ECP/EPP/SP parallel port 25 * 2 USB ports 26 */ 27 28 #include <linux/kernel.h> 29 #include <linux/types.h> 30 #include <linux/mm.h> 31 #include <linux/sched.h> 32 #include <linux/pci.h> 33 #include <linux/init.h> 34 #include <linux/reboot.h> 35 #include <linux/memblock.h> 36 #include <linux/bitops.h> 37 38 #include <asm/ptrace.h> 39 #include <asm/dma.h> 40 #include <asm/irq.h> 41 #include <asm/mmu_context.h> 42 #include <asm/io.h> 43 #include <asm/core_irongate.h> 44 #include <asm/hwrpb.h> 45 #include <asm/tlbflush.h> 46 47 #include "proto.h" 48 #include "err_impl.h" 49 #include "irq_impl.h" 50 #include "pci_impl.h" 51 #include "machvec_impl.h" 52 53 54 static void __init 55 nautilus_init_irq(void) 56 { 57 if (alpha_using_srm) { 58 alpha_mv.device_interrupt = srm_device_interrupt; 59 } 60 61 init_i8259a_irqs(); 62 common_init_isa_dma(); 63 } 64 65 static int 66 nautilus_map_irq(const struct pci_dev *dev, u8 slot, u8 pin) 67 { 68 /* Preserve the IRQ set up by the console. */ 69 70 u8 irq; 71 /* UP1500: AGP INTA is actually routed to IRQ 5, not IRQ 10 as 72 console reports. Check the device id of AGP bridge to distinguish 73 UP1500 from UP1000/1100. Note: 'pin' is 2 due to bridge swizzle. */ 74 if (slot == 1 && pin == 2 && 75 dev->bus->self && dev->bus->self->device == 0x700f) 76 return 5; 77 pci_read_config_byte(dev, PCI_INTERRUPT_LINE, &irq); 78 return irq; 79 } 80 81 static void 82 nautilus_kill_arch(int mode) 83 { 84 struct pci_bus *bus = pci_isa_hose->bus; 85 u32 pmuport; 86 int off; 87 88 switch (mode) { 89 case LINUX_REBOOT_CMD_RESTART: 90 if (! alpha_using_srm) { 91 u8 t8; 92 pci_bus_read_config_byte(bus, 0x38, 0x43, &t8); 93 pci_bus_write_config_byte(bus, 0x38, 0x43, t8 | 0x80); 94 outb(1, 0x92); 95 outb(0, 0x92); 96 /* NOTREACHED */ 97 } 98 break; 99 100 case LINUX_REBOOT_CMD_POWER_OFF: 101 /* Assume M1543C */ 102 off = 0x2000; /* SLP_TYPE = 0, SLP_EN = 1 */ 103 pci_bus_read_config_dword(bus, 0x88, 0x10, &pmuport); 104 if (!pmuport) { 105 /* M1535D/D+ */ 106 off = 0x3400; /* SLP_TYPE = 5, SLP_EN = 1 */ 107 pci_bus_read_config_dword(bus, 0x88, 0xe0, &pmuport); 108 } 109 pmuport &= 0xfffe; 110 outw(0xffff, pmuport); /* Clear pending events. */ 111 outw(off, pmuport + 4); 112 /* NOTREACHED */ 113 break; 114 } 115 } 116 117 /* Perform analysis of a machine check that arrived from the system (NMI) */ 118 119 static void 120 naut_sys_machine_check(unsigned long vector, unsigned long la_ptr, 121 struct pt_regs *regs) 122 { 123 printk("PC %lx RA %lx\n", regs->pc, regs->r26); 124 irongate_pci_clr_err(); 125 } 126 127 /* Machine checks can come from two sources - those on the CPU and those 128 in the system. They are analysed separately but all starts here. */ 129 130 static void 131 nautilus_machine_check(unsigned long vector, unsigned long la_ptr) 132 { 133 char *mchk_class; 134 135 /* Now for some analysis. Machine checks fall into two classes -- 136 those picked up by the system, and those picked up by the CPU. 137 Add to that the two levels of severity - correctable or not. */ 138 139 if (vector == SCB_Q_SYSMCHK 140 && ((IRONGATE0->dramms & 0x300) == 0x300)) { 141 unsigned long nmi_ctl; 142 143 /* Clear ALI NMI */ 144 nmi_ctl = inb(0x61); 145 nmi_ctl |= 0x0c; 146 outb(nmi_ctl, 0x61); 147 nmi_ctl &= ~0x0c; 148 outb(nmi_ctl, 0x61); 149 150 /* Write again clears error bits. */ 151 IRONGATE0->stat_cmd = IRONGATE0->stat_cmd & ~0x100; 152 mb(); 153 IRONGATE0->stat_cmd; 154 155 /* Write again clears error bits. */ 156 IRONGATE0->dramms = IRONGATE0->dramms; 157 mb(); 158 IRONGATE0->dramms; 159 160 draina(); 161 wrmces(0x7); 162 mb(); 163 return; 164 } 165 166 if (vector == SCB_Q_SYSERR) 167 mchk_class = "Correctable"; 168 else if (vector == SCB_Q_SYSMCHK) 169 mchk_class = "Fatal"; 170 else { 171 ev6_machine_check(vector, la_ptr); 172 return; 173 } 174 175 printk(KERN_CRIT "NAUTILUS Machine check 0x%lx " 176 "[%s System Machine Check (NMI)]\n", 177 vector, mchk_class); 178 179 naut_sys_machine_check(vector, la_ptr, get_irq_regs()); 180 181 /* Tell the PALcode to clear the machine check */ 182 draina(); 183 wrmces(0x7); 184 mb(); 185 } 186 187 static struct resource irongate_mem = { 188 .name = "Irongate PCI MEM", 189 .flags = IORESOURCE_MEM, 190 }; 191 static struct resource busn_resource = { 192 .name = "PCI busn", 193 .start = 0, 194 .end = 255, 195 .flags = IORESOURCE_BUS, 196 }; 197 198 static void __init 199 nautilus_init_pci(void) 200 { 201 struct pci_controller *hose = hose_head; 202 struct pci_host_bridge *bridge; 203 struct pci_bus *bus; 204 unsigned long bus_align, bus_size, pci_mem; 205 unsigned long memtop = max_low_pfn << PAGE_SHIFT; 206 207 bridge = pci_alloc_host_bridge(0); 208 if (!bridge) 209 return; 210 211 /* Use default IO. */ 212 pci_add_resource(&bridge->windows, &ioport_resource); 213 /* Irongate PCI memory aperture, calculate required size before 214 setting it up. */ 215 pci_add_resource(&bridge->windows, &irongate_mem); 216 217 pci_add_resource(&bridge->windows, &busn_resource); 218 bridge->dev.parent = NULL; 219 bridge->sysdata = hose; 220 bridge->busnr = 0; 221 bridge->ops = alpha_mv.pci_ops; 222 bridge->swizzle_irq = alpha_mv.pci_swizzle; 223 bridge->map_irq = alpha_mv.pci_map_irq; 224 bridge->size_windows = 1; 225 226 /* Scan our single hose. */ 227 if (pci_scan_root_bus_bridge(bridge)) { 228 pci_free_host_bridge(bridge); 229 return; 230 } 231 bus = hose->bus = bridge->bus; 232 pcibios_claim_one_bus(bus); 233 234 pci_bus_size_bridges(bus); 235 236 /* Now we've got the size and alignment of PCI memory resources 237 stored in irongate_mem. Set up the PCI memory range: limit is 238 hardwired to 0xffffffff, base must be aligned to 16Mb. */ 239 bus_align = irongate_mem.start; 240 bus_size = irongate_mem.end + 1 - bus_align; 241 if (bus_align < 0x1000000UL) 242 bus_align = 0x1000000UL; 243 244 pci_mem = (0x100000000UL - bus_size) & -bus_align; 245 irongate_mem.start = pci_mem; 246 irongate_mem.end = 0xffffffffUL; 247 248 /* Register our newly calculated PCI memory window in the resource 249 tree. */ 250 if (request_resource(&iomem_resource, &irongate_mem) < 0) 251 printk(KERN_ERR "Failed to request MEM on hose 0\n"); 252 253 printk(KERN_INFO "Irongate pci_mem %pR\n", &irongate_mem); 254 255 if (pci_mem < memtop) 256 memtop = pci_mem; 257 if (memtop > alpha_mv.min_mem_address) { 258 free_reserved_area(__va(alpha_mv.min_mem_address), 259 __va(memtop), -1, NULL); 260 printk(KERN_INFO "nautilus_init_pci: %ldk freed\n", 261 (memtop - alpha_mv.min_mem_address) >> 10); 262 } 263 if ((IRONGATE0->dev_vendor >> 16) > 0x7006) /* Albacore? */ 264 IRONGATE0->pci_mem = pci_mem; 265 266 pci_bus_assign_resources(bus); 267 pci_bus_add_devices(bus); 268 } 269 270 /* 271 * The System Vectors 272 */ 273 274 struct alpha_machine_vector nautilus_mv __initmv = { 275 .vector_name = "Nautilus", 276 DO_EV6_MMU, 277 DO_DEFAULT_RTC, 278 DO_IRONGATE_IO, 279 .machine_check = nautilus_machine_check, 280 .max_isa_dma_address = ALPHA_MAX_ISA_DMA_ADDRESS, 281 .min_io_address = DEFAULT_IO_BASE, 282 .min_mem_address = IRONGATE_DEFAULT_MEM_BASE, 283 284 .nr_irqs = 16, 285 .device_interrupt = isa_device_interrupt, 286 287 .init_arch = irongate_init_arch, 288 .init_irq = nautilus_init_irq, 289 .init_rtc = common_init_rtc, 290 .init_pci = nautilus_init_pci, 291 .kill_arch = nautilus_kill_arch, 292 .pci_map_irq = nautilus_map_irq, 293 .pci_swizzle = common_swizzle, 294 }; 295 ALIAS_MV(nautilus) 296