1 /* 2 * linux/arch/alpha/kernel/sys_cabriolet.c 3 * 4 * Copyright (C) 1995 David A Rusling 5 * Copyright (C) 1996 Jay A Estabrook 6 * Copyright (C) 1998, 1999, 2000 Richard Henderson 7 * 8 * Code supporting the Cabriolet (AlphaPC64), EB66+, and EB164, 9 * PC164 and LX164. 10 */ 11 12 #include <linux/kernel.h> 13 #include <linux/types.h> 14 #include <linux/mm.h> 15 #include <linux/sched.h> 16 #include <linux/pci.h> 17 #include <linux/init.h> 18 #include <linux/bitops.h> 19 20 #include <asm/ptrace.h> 21 #include <asm/system.h> 22 #include <asm/dma.h> 23 #include <asm/irq.h> 24 #include <asm/mmu_context.h> 25 #include <asm/io.h> 26 #include <asm/pgtable.h> 27 #include <asm/core_apecs.h> 28 #include <asm/core_cia.h> 29 #include <asm/core_lca.h> 30 #include <asm/tlbflush.h> 31 32 #include "proto.h" 33 #include "irq_impl.h" 34 #include "pci_impl.h" 35 #include "machvec_impl.h" 36 #include "pc873xx.h" 37 38 /* Note mask bit is true for DISABLED irqs. */ 39 static unsigned long cached_irq_mask = ~0UL; 40 41 static inline void 42 cabriolet_update_irq_hw(unsigned int irq, unsigned long mask) 43 { 44 int ofs = (irq - 16) / 8; 45 outb(mask >> (16 + ofs * 8), 0x804 + ofs); 46 } 47 48 static inline void 49 cabriolet_enable_irq(struct irq_data *d) 50 { 51 cabriolet_update_irq_hw(d->irq, cached_irq_mask &= ~(1UL << d->irq)); 52 } 53 54 static void 55 cabriolet_disable_irq(struct irq_data *d) 56 { 57 cabriolet_update_irq_hw(d->irq, cached_irq_mask |= 1UL << d->irq); 58 } 59 60 static struct irq_chip cabriolet_irq_type = { 61 .name = "CABRIOLET", 62 .irq_unmask = cabriolet_enable_irq, 63 .irq_mask = cabriolet_disable_irq, 64 .irq_mask_ack = cabriolet_disable_irq, 65 }; 66 67 static void 68 cabriolet_device_interrupt(unsigned long v) 69 { 70 unsigned long pld; 71 unsigned int i; 72 73 /* Read the interrupt summary registers */ 74 pld = inb(0x804) | (inb(0x805) << 8) | (inb(0x806) << 16); 75 76 /* 77 * Now for every possible bit set, work through them and call 78 * the appropriate interrupt handler. 79 */ 80 while (pld) { 81 i = ffz(~pld); 82 pld &= pld - 1; /* clear least bit set */ 83 if (i == 4) { 84 isa_device_interrupt(v); 85 } else { 86 handle_irq(16 + i); 87 } 88 } 89 } 90 91 static void __init 92 common_init_irq(void (*srm_dev_int)(unsigned long v)) 93 { 94 init_i8259a_irqs(); 95 96 if (alpha_using_srm) { 97 alpha_mv.device_interrupt = srm_dev_int; 98 init_srm_irqs(35, 0); 99 } 100 else { 101 long i; 102 103 outb(0xff, 0x804); 104 outb(0xff, 0x805); 105 outb(0xff, 0x806); 106 107 for (i = 16; i < 35; ++i) { 108 irq_set_chip_and_handler(i, &cabriolet_irq_type, 109 handle_level_irq); 110 irq_set_status_flags(i, IRQ_LEVEL); 111 } 112 } 113 114 common_init_isa_dma(); 115 setup_irq(16+4, &isa_cascade_irqaction); 116 } 117 118 #ifndef CONFIG_ALPHA_PC164 119 static void __init 120 cabriolet_init_irq(void) 121 { 122 common_init_irq(srm_device_interrupt); 123 } 124 #endif 125 126 #if defined(CONFIG_ALPHA_GENERIC) || defined(CONFIG_ALPHA_PC164) 127 /* In theory, the PC164 has the same interrupt hardware as the other 128 Cabriolet based systems. However, something got screwed up late 129 in the development cycle which broke the interrupt masking hardware. 130 Repeat, it is not possible to mask and ack interrupts. At all. 131 132 In an attempt to work around this, while processing interrupts, 133 we do not allow the IPL to drop below what it is currently. This 134 prevents the possibility of recursion. 135 136 ??? Another option might be to force all PCI devices to use edge 137 triggered rather than level triggered interrupts. That might be 138 too invasive though. */ 139 140 static void 141 pc164_srm_device_interrupt(unsigned long v) 142 { 143 __min_ipl = getipl(); 144 srm_device_interrupt(v); 145 __min_ipl = 0; 146 } 147 148 static void 149 pc164_device_interrupt(unsigned long v) 150 { 151 __min_ipl = getipl(); 152 cabriolet_device_interrupt(v); 153 __min_ipl = 0; 154 } 155 156 static void __init 157 pc164_init_irq(void) 158 { 159 common_init_irq(pc164_srm_device_interrupt); 160 } 161 #endif 162 163 /* 164 * The EB66+ is very similar to the EB66 except that it does not have 165 * the on-board NCR and Tulip chips. In the code below, I have used 166 * slot number to refer to the id select line and *not* the slot 167 * number used in the EB66+ documentation. However, in the table, 168 * I've given the slot number, the id select line and the Jxx number 169 * that's printed on the board. The interrupt pins from the PCI slots 170 * are wired into 3 interrupt summary registers at 0x804, 0x805 and 171 * 0x806 ISA. 172 * 173 * In the table, -1 means don't assign an IRQ number. This is usually 174 * because it is the Saturn IO (SIO) PCI/ISA Bridge Chip. 175 */ 176 177 static inline int __init 178 eb66p_map_irq(struct pci_dev *dev, u8 slot, u8 pin) 179 { 180 static char irq_tab[5][5] __initdata = { 181 /*INT INTA INTB INTC INTD */ 182 {16+0, 16+0, 16+5, 16+9, 16+13}, /* IdSel 6, slot 0, J25 */ 183 {16+1, 16+1, 16+6, 16+10, 16+14}, /* IdSel 7, slot 1, J26 */ 184 { -1, -1, -1, -1, -1}, /* IdSel 8, SIO */ 185 {16+2, 16+2, 16+7, 16+11, 16+15}, /* IdSel 9, slot 2, J27 */ 186 {16+3, 16+3, 16+8, 16+12, 16+6} /* IdSel 10, slot 3, J28 */ 187 }; 188 const long min_idsel = 6, max_idsel = 10, irqs_per_slot = 5; 189 return COMMON_TABLE_LOOKUP; 190 } 191 192 193 /* 194 * The AlphaPC64 is very similar to the EB66+ except that its slots 195 * are numbered differently. In the code below, I have used slot 196 * number to refer to the id select line and *not* the slot number 197 * used in the AlphaPC64 documentation. However, in the table, I've 198 * given the slot number, the id select line and the Jxx number that's 199 * printed on the board. The interrupt pins from the PCI slots are 200 * wired into 3 interrupt summary registers at 0x804, 0x805 and 0x806 201 * ISA. 202 * 203 * In the table, -1 means don't assign an IRQ number. This is usually 204 * because it is the Saturn IO (SIO) PCI/ISA Bridge Chip. 205 */ 206 207 static inline int __init 208 cabriolet_map_irq(struct pci_dev *dev, u8 slot, u8 pin) 209 { 210 static char irq_tab[5][5] __initdata = { 211 /*INT INTA INTB INTC INTD */ 212 { 16+2, 16+2, 16+7, 16+11, 16+15}, /* IdSel 5, slot 2, J21 */ 213 { 16+0, 16+0, 16+5, 16+9, 16+13}, /* IdSel 6, slot 0, J19 */ 214 { 16+1, 16+1, 16+6, 16+10, 16+14}, /* IdSel 7, slot 1, J20 */ 215 { -1, -1, -1, -1, -1}, /* IdSel 8, SIO */ 216 { 16+3, 16+3, 16+8, 16+12, 16+16} /* IdSel 9, slot 3, J22 */ 217 }; 218 const long min_idsel = 5, max_idsel = 9, irqs_per_slot = 5; 219 return COMMON_TABLE_LOOKUP; 220 } 221 222 static inline void __init 223 cabriolet_enable_ide(void) 224 { 225 if (pc873xx_probe() == -1) { 226 printk(KERN_ERR "Probing for PC873xx Super IO chip failed.\n"); 227 } else { 228 printk(KERN_INFO "Found %s Super IO chip at 0x%x\n", 229 pc873xx_get_model(), pc873xx_get_base()); 230 231 pc873xx_enable_ide(); 232 } 233 } 234 235 static inline void __init 236 cabriolet_init_pci(void) 237 { 238 common_init_pci(); 239 cabriolet_enable_ide(); 240 } 241 242 static inline void __init 243 cia_cab_init_pci(void) 244 { 245 cia_init_pci(); 246 cabriolet_enable_ide(); 247 } 248 249 /* 250 * The PC164 and LX164 have 19 PCI interrupts, four from each of the four 251 * PCI slots, the SIO, PCI/IDE, and USB. 252 * 253 * Each of the interrupts can be individually masked. This is 254 * accomplished by setting the appropriate bit in the mask register. 255 * A bit is set by writing a "1" to the desired position in the mask 256 * register and cleared by writing a "0". There are 3 mask registers 257 * located at ISA address 804h, 805h and 806h. 258 * 259 * An I/O read at ISA address 804h, 805h, 806h will return the 260 * state of the 11 PCI interrupts and not the state of the MASKED 261 * interrupts. 262 * 263 * Note: A write to I/O 804h, 805h, and 806h the mask register will be 264 * updated. 265 * 266 * 267 * ISA DATA<7:0> 268 * ISA +--------------------------------------------------------------+ 269 * ADDRESS | 7 | 6 | 5 | 4 | 3 | 2 | 1 | 0 | 270 * +==============================================================+ 271 * 0x804 | INTB0 | USB | IDE | SIO | INTA3 |INTA2 | INTA1 | INTA0 | 272 * +--------------------------------------------------------------+ 273 * 0x805 | INTD0 | INTC3 | INTC2 | INTC1 | INTC0 |INTB3 | INTB2 | INTB1 | 274 * +--------------------------------------------------------------+ 275 * 0x806 | Rsrv | Rsrv | Rsrv | Rsrv | Rsrv |INTD3 | INTD2 | INTD1 | 276 * +--------------------------------------------------------------+ 277 * * Rsrv = reserved bits 278 * Note: The mask register is write-only. 279 * 280 * IdSel 281 * 5 32 bit PCI option slot 2 282 * 6 64 bit PCI option slot 0 283 * 7 64 bit PCI option slot 1 284 * 8 Saturn I/O 285 * 9 32 bit PCI option slot 3 286 * 10 USB 287 * 11 IDE 288 * 289 */ 290 291 static inline int __init 292 alphapc164_map_irq(struct pci_dev *dev, u8 slot, u8 pin) 293 { 294 static char irq_tab[7][5] __initdata = { 295 /*INT INTA INTB INTC INTD */ 296 { 16+2, 16+2, 16+9, 16+13, 16+17}, /* IdSel 5, slot 2, J20 */ 297 { 16+0, 16+0, 16+7, 16+11, 16+15}, /* IdSel 6, slot 0, J29 */ 298 { 16+1, 16+1, 16+8, 16+12, 16+16}, /* IdSel 7, slot 1, J26 */ 299 { -1, -1, -1, -1, -1}, /* IdSel 8, SIO */ 300 { 16+3, 16+3, 16+10, 16+14, 16+18}, /* IdSel 9, slot 3, J19 */ 301 { 16+6, 16+6, 16+6, 16+6, 16+6}, /* IdSel 10, USB */ 302 { 16+5, 16+5, 16+5, 16+5, 16+5} /* IdSel 11, IDE */ 303 }; 304 const long min_idsel = 5, max_idsel = 11, irqs_per_slot = 5; 305 return COMMON_TABLE_LOOKUP; 306 } 307 308 static inline void __init 309 alphapc164_init_pci(void) 310 { 311 cia_init_pci(); 312 SMC93x_Init(); 313 } 314 315 316 /* 317 * The System Vector 318 */ 319 320 #if defined(CONFIG_ALPHA_GENERIC) || defined(CONFIG_ALPHA_CABRIOLET) 321 struct alpha_machine_vector cabriolet_mv __initmv = { 322 .vector_name = "Cabriolet", 323 DO_EV4_MMU, 324 DO_DEFAULT_RTC, 325 DO_APECS_IO, 326 .machine_check = apecs_machine_check, 327 .max_isa_dma_address = ALPHA_MAX_ISA_DMA_ADDRESS, 328 .min_io_address = DEFAULT_IO_BASE, 329 .min_mem_address = APECS_AND_LCA_DEFAULT_MEM_BASE, 330 331 .nr_irqs = 35, 332 .device_interrupt = cabriolet_device_interrupt, 333 334 .init_arch = apecs_init_arch, 335 .init_irq = cabriolet_init_irq, 336 .init_rtc = common_init_rtc, 337 .init_pci = cabriolet_init_pci, 338 .pci_map_irq = cabriolet_map_irq, 339 .pci_swizzle = common_swizzle, 340 }; 341 #ifndef CONFIG_ALPHA_EB64P 342 ALIAS_MV(cabriolet) 343 #endif 344 #endif 345 346 #if defined(CONFIG_ALPHA_GENERIC) || defined(CONFIG_ALPHA_EB164) 347 struct alpha_machine_vector eb164_mv __initmv = { 348 .vector_name = "EB164", 349 DO_EV5_MMU, 350 DO_DEFAULT_RTC, 351 DO_CIA_IO, 352 .machine_check = cia_machine_check, 353 .max_isa_dma_address = ALPHA_MAX_ISA_DMA_ADDRESS, 354 .min_io_address = DEFAULT_IO_BASE, 355 .min_mem_address = CIA_DEFAULT_MEM_BASE, 356 357 .nr_irqs = 35, 358 .device_interrupt = cabriolet_device_interrupt, 359 360 .init_arch = cia_init_arch, 361 .init_irq = cabriolet_init_irq, 362 .init_rtc = common_init_rtc, 363 .init_pci = cia_cab_init_pci, 364 .kill_arch = cia_kill_arch, 365 .pci_map_irq = cabriolet_map_irq, 366 .pci_swizzle = common_swizzle, 367 }; 368 ALIAS_MV(eb164) 369 #endif 370 371 #if defined(CONFIG_ALPHA_GENERIC) || defined(CONFIG_ALPHA_EB66P) 372 struct alpha_machine_vector eb66p_mv __initmv = { 373 .vector_name = "EB66+", 374 DO_EV4_MMU, 375 DO_DEFAULT_RTC, 376 DO_LCA_IO, 377 .machine_check = lca_machine_check, 378 .max_isa_dma_address = ALPHA_MAX_ISA_DMA_ADDRESS, 379 .min_io_address = DEFAULT_IO_BASE, 380 .min_mem_address = APECS_AND_LCA_DEFAULT_MEM_BASE, 381 382 .nr_irqs = 35, 383 .device_interrupt = cabriolet_device_interrupt, 384 385 .init_arch = lca_init_arch, 386 .init_irq = cabriolet_init_irq, 387 .init_rtc = common_init_rtc, 388 .init_pci = cabriolet_init_pci, 389 .pci_map_irq = eb66p_map_irq, 390 .pci_swizzle = common_swizzle, 391 }; 392 ALIAS_MV(eb66p) 393 #endif 394 395 #if defined(CONFIG_ALPHA_GENERIC) || defined(CONFIG_ALPHA_LX164) 396 struct alpha_machine_vector lx164_mv __initmv = { 397 .vector_name = "LX164", 398 DO_EV5_MMU, 399 DO_DEFAULT_RTC, 400 DO_PYXIS_IO, 401 .machine_check = cia_machine_check, 402 .max_isa_dma_address = ALPHA_MAX_ISA_DMA_ADDRESS, 403 .min_io_address = DEFAULT_IO_BASE, 404 .min_mem_address = DEFAULT_MEM_BASE, 405 .pci_dac_offset = PYXIS_DAC_OFFSET, 406 407 .nr_irqs = 35, 408 .device_interrupt = cabriolet_device_interrupt, 409 410 .init_arch = pyxis_init_arch, 411 .init_irq = cabriolet_init_irq, 412 .init_rtc = common_init_rtc, 413 .init_pci = alphapc164_init_pci, 414 .kill_arch = cia_kill_arch, 415 .pci_map_irq = alphapc164_map_irq, 416 .pci_swizzle = common_swizzle, 417 }; 418 ALIAS_MV(lx164) 419 #endif 420 421 #if defined(CONFIG_ALPHA_GENERIC) || defined(CONFIG_ALPHA_PC164) 422 struct alpha_machine_vector pc164_mv __initmv = { 423 .vector_name = "PC164", 424 DO_EV5_MMU, 425 DO_DEFAULT_RTC, 426 DO_CIA_IO, 427 .machine_check = cia_machine_check, 428 .max_isa_dma_address = ALPHA_MAX_ISA_DMA_ADDRESS, 429 .min_io_address = DEFAULT_IO_BASE, 430 .min_mem_address = CIA_DEFAULT_MEM_BASE, 431 432 .nr_irqs = 35, 433 .device_interrupt = pc164_device_interrupt, 434 435 .init_arch = cia_init_arch, 436 .init_irq = pc164_init_irq, 437 .init_rtc = common_init_rtc, 438 .init_pci = alphapc164_init_pci, 439 .kill_arch = cia_kill_arch, 440 .pci_map_irq = alphapc164_map_irq, 441 .pci_swizzle = common_swizzle, 442 }; 443 ALIAS_MV(pc164) 444 #endif 445