xref: /linux/arch/alpha/kernel/core_cia.c (revision bd628c1bed7902ec1f24ba0fe70758949146abbe)
1 // SPDX-License-Identifier: GPL-2.0
2 /*
3  *	linux/arch/alpha/kernel/core_cia.c
4  *
5  * Written by David A Rusling (david.rusling@reo.mts.dec.com).
6  * December 1995.
7  *
8  *	Copyright (C) 1995  David A Rusling
9  *	Copyright (C) 1997, 1998  Jay Estabrook
10  *	Copyright (C) 1998, 1999, 2000  Richard Henderson
11  *
12  * Code common to all CIA core logic chips.
13  */
14 
15 #define __EXTERN_INLINE inline
16 #include <asm/io.h>
17 #include <asm/core_cia.h>
18 #undef __EXTERN_INLINE
19 
20 #include <linux/types.h>
21 #include <linux/pci.h>
22 #include <linux/sched.h>
23 #include <linux/init.h>
24 #include <linux/memblock.h>
25 
26 #include <asm/ptrace.h>
27 #include <asm/mce.h>
28 
29 #include "proto.h"
30 #include "pci_impl.h"
31 
32 
33 /*
34  * NOTE: Herein lie back-to-back mb instructions.  They are magic.
35  * One plausible explanation is that the i/o controller does not properly
36  * handle the system transaction.  Another involves timing.  Ho hum.
37  */
38 
39 #define DEBUG_CONFIG 0
40 #if DEBUG_CONFIG
41 # define DBGC(args)	printk args
42 #else
43 # define DBGC(args)
44 #endif
45 
46 #define vip	volatile int  *
47 
48 /*
49  * Given a bus, device, and function number, compute resulting
50  * configuration space address.  It is therefore not safe to have
51  * concurrent invocations to configuration space access routines, but
52  * there really shouldn't be any need for this.
53  *
54  * Type 0:
55  *
56  *  3 3|3 3 2 2|2 2 2 2|2 2 2 2|1 1 1 1|1 1 1 1|1 1
57  *  3 2|1 0 9 8|7 6 5 4|3 2 1 0|9 8 7 6|5 4 3 2|1 0 9 8|7 6 5 4|3 2 1 0
58  * +-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+
59  * | | |D|D|D|D|D|D|D|D|D|D|D|D|D|D|D|D|D|D|D|D|D|F|F|F|R|R|R|R|R|R|0|0|
60  * +-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+
61  *
62  *	31:11	Device select bit.
63  * 	10:8	Function number
64  * 	 7:2	Register number
65  *
66  * Type 1:
67  *
68  *  3 3|3 3 2 2|2 2 2 2|2 2 2 2|1 1 1 1|1 1 1 1|1 1
69  *  3 2|1 0 9 8|7 6 5 4|3 2 1 0|9 8 7 6|5 4 3 2|1 0 9 8|7 6 5 4|3 2 1 0
70  * +-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+
71  * | | | | | | | | | | |B|B|B|B|B|B|B|B|D|D|D|D|D|F|F|F|R|R|R|R|R|R|0|1|
72  * +-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+
73  *
74  *	31:24	reserved
75  *	23:16	bus number (8 bits = 128 possible buses)
76  *	15:11	Device number (5 bits)
77  *	10:8	function number
78  *	 7:2	register number
79  *
80  * Notes:
81  *	The function number selects which function of a multi-function device
82  *	(e.g., SCSI and Ethernet).
83  *
84  *	The register selects a DWORD (32 bit) register offset.  Hence it
85  *	doesn't get shifted by 2 bits as we want to "drop" the bottom two
86  *	bits.
87  */
88 
89 static int
90 mk_conf_addr(struct pci_bus *bus_dev, unsigned int device_fn, int where,
91 	     unsigned long *pci_addr, unsigned char *type1)
92 {
93 	u8 bus = bus_dev->number;
94 
95 	*type1 = (bus != 0);
96 	*pci_addr = (bus << 16) | (device_fn << 8) | where;
97 
98 	DBGC(("mk_conf_addr(bus=%d ,device_fn=0x%x, where=0x%x,"
99 	      " returning address 0x%p\n"
100 	      bus, device_fn, where, *pci_addr));
101 
102 	return 0;
103 }
104 
105 static unsigned int
106 conf_read(unsigned long addr, unsigned char type1)
107 {
108 	unsigned long flags;
109 	int stat0, value;
110 	int cia_cfg = 0;
111 
112 	DBGC(("conf_read(addr=0x%lx, type1=%d) ", addr, type1));
113 	local_irq_save(flags);
114 
115 	/* Reset status register to avoid losing errors.  */
116 	stat0 = *(vip)CIA_IOC_CIA_ERR;
117 	*(vip)CIA_IOC_CIA_ERR = stat0;
118 	mb();
119 	*(vip)CIA_IOC_CIA_ERR; /* re-read to force write */
120 
121 	/* If Type1 access, must set CIA CFG. */
122 	if (type1) {
123 		cia_cfg = *(vip)CIA_IOC_CFG;
124 		*(vip)CIA_IOC_CFG = (cia_cfg & ~3) | 1;
125 		mb();
126 		*(vip)CIA_IOC_CFG;
127 	}
128 
129 	mb();
130 	draina();
131 	mcheck_expected(0) = 1;
132 	mcheck_taken(0) = 0;
133 	mb();
134 
135 	/* Access configuration space.  */
136 	value = *(vip)addr;
137 	mb();
138 	mb();  /* magic */
139 	if (mcheck_taken(0)) {
140 		mcheck_taken(0) = 0;
141 		value = 0xffffffff;
142 		mb();
143 	}
144 	mcheck_expected(0) = 0;
145 	mb();
146 
147 	/* If Type1 access, must reset IOC CFG so normal IO space ops work.  */
148 	if (type1) {
149 		*(vip)CIA_IOC_CFG = cia_cfg;
150 		mb();
151 		*(vip)CIA_IOC_CFG;
152 	}
153 
154 	local_irq_restore(flags);
155 	DBGC(("done\n"));
156 
157 	return value;
158 }
159 
160 static void
161 conf_write(unsigned long addr, unsigned int value, unsigned char type1)
162 {
163 	unsigned long flags;
164 	int stat0, cia_cfg = 0;
165 
166 	DBGC(("conf_write(addr=0x%lx, type1=%d) ", addr, type1));
167 	local_irq_save(flags);
168 
169 	/* Reset status register to avoid losing errors.  */
170 	stat0 = *(vip)CIA_IOC_CIA_ERR;
171 	*(vip)CIA_IOC_CIA_ERR = stat0;
172 	mb();
173 	*(vip)CIA_IOC_CIA_ERR; /* re-read to force write */
174 
175 	/* If Type1 access, must set CIA CFG.  */
176 	if (type1) {
177 		cia_cfg = *(vip)CIA_IOC_CFG;
178 		*(vip)CIA_IOC_CFG = (cia_cfg & ~3) | 1;
179 		mb();
180 		*(vip)CIA_IOC_CFG;
181 	}
182 
183 	mb();
184 	draina();
185 	mcheck_expected(0) = 1;
186 	mcheck_taken(0) = 0;
187 	mb();
188 
189 	/* Access configuration space.  */
190 	*(vip)addr = value;
191 	mb();
192 	*(vip)addr; /* read back to force the write */
193 
194 	mcheck_expected(0) = 0;
195 	mb();
196 
197 	/* If Type1 access, must reset IOC CFG so normal IO space ops work.  */
198 	if (type1) {
199 		*(vip)CIA_IOC_CFG = cia_cfg;
200 		mb();
201 		*(vip)CIA_IOC_CFG;
202 	}
203 
204 	local_irq_restore(flags);
205 	DBGC(("done\n"));
206 }
207 
208 static int
209 cia_read_config(struct pci_bus *bus, unsigned int devfn, int where, int size,
210 		u32 *value)
211 {
212 	unsigned long addr, pci_addr;
213 	long mask;
214 	unsigned char type1;
215 	int shift;
216 
217 	if (mk_conf_addr(bus, devfn, where, &pci_addr, &type1))
218 		return PCIBIOS_DEVICE_NOT_FOUND;
219 
220 	mask = (size - 1) * 8;
221 	shift = (where & 3) * 8;
222 	addr = (pci_addr << 5) + mask + CIA_CONF;
223 	*value = conf_read(addr, type1) >> (shift);
224 	return PCIBIOS_SUCCESSFUL;
225 }
226 
227 static int
228 cia_write_config(struct pci_bus *bus, unsigned int devfn, int where, int size,
229 		 u32 value)
230 {
231 	unsigned long addr, pci_addr;
232 	long mask;
233 	unsigned char type1;
234 
235 	if (mk_conf_addr(bus, devfn, where, &pci_addr, &type1))
236 		return PCIBIOS_DEVICE_NOT_FOUND;
237 
238 	mask = (size - 1) * 8;
239 	addr = (pci_addr << 5) + mask + CIA_CONF;
240 	conf_write(addr, value << ((where & 3) * 8), type1);
241 	return PCIBIOS_SUCCESSFUL;
242 }
243 
244 struct pci_ops cia_pci_ops =
245 {
246 	.read = 	cia_read_config,
247 	.write =	cia_write_config,
248 };
249 
250 /*
251  * CIA Pass 1 and PYXIS Pass 1 and 2 have a broken scatter-gather tlb.
252  * It cannot be invalidated.  Rather than hard code the pass numbers,
253  * actually try the tbia to see if it works.
254  */
255 
256 void
257 cia_pci_tbi(struct pci_controller *hose, dma_addr_t start, dma_addr_t end)
258 {
259 	wmb();
260 	*(vip)CIA_IOC_PCI_TBIA = 3;	/* Flush all locked and unlocked.  */
261 	mb();
262 	*(vip)CIA_IOC_PCI_TBIA;
263 }
264 
265 /*
266  * On PYXIS, even if the tbia works, we cannot use it. It effectively locks
267  * the chip (as well as direct write to the tag registers) if there is a
268  * SG DMA operation in progress. This is true at least for PYXIS rev. 1,
269  * so always use the method below.
270  */
271 /*
272  * This is the method NT and NetBSD use.
273  *
274  * Allocate mappings, and put the chip into DMA loopback mode to read a
275  * garbage page.  This works by causing TLB misses, causing old entries to
276  * be purged to make room for the new entries coming in for the garbage page.
277  */
278 
279 #define CIA_BROKEN_TBIA_BASE	0x30000000
280 #define CIA_BROKEN_TBIA_SIZE	1024
281 
282 /* Always called with interrupts disabled */
283 void
284 cia_pci_tbi_try2(struct pci_controller *hose,
285 		 dma_addr_t start, dma_addr_t end)
286 {
287 	void __iomem *bus_addr;
288 	int ctrl;
289 
290 	/* Put the chip into PCI loopback mode.  */
291 	mb();
292 	ctrl = *(vip)CIA_IOC_CIA_CTRL;
293 	*(vip)CIA_IOC_CIA_CTRL = ctrl | CIA_CTRL_PCI_LOOP_EN;
294 	mb();
295 	*(vip)CIA_IOC_CIA_CTRL;
296 	mb();
297 
298 	/* Read from PCI dense memory space at TBI_ADDR, skipping 32k on
299 	   each read.  This forces SG TLB misses.  NetBSD claims that the
300 	   TLB entries are not quite LRU, meaning that we need to read more
301 	   times than there are actual tags.  The 2117x docs claim strict
302 	   round-robin.  Oh well, we've come this far...  */
303 	/* Even better - as seen on the PYXIS rev 1 the TLB tags 0-3 can
304 	   be filled by the TLB misses *only once* after being invalidated
305 	   (by tbia or direct write). Next misses won't update them even
306 	   though the lock bits are cleared. Tags 4-7 are "quite LRU" though,
307 	   so use them and read at window 3 base exactly 4 times. Reading
308 	   more sometimes makes the chip crazy.  -ink */
309 
310 	bus_addr = cia_ioremap(CIA_BROKEN_TBIA_BASE, 32768 * 4);
311 
312 	cia_readl(bus_addr + 0x00000);
313 	cia_readl(bus_addr + 0x08000);
314 	cia_readl(bus_addr + 0x10000);
315 	cia_readl(bus_addr + 0x18000);
316 
317 	cia_iounmap(bus_addr);
318 
319 	/* Restore normal PCI operation.  */
320 	mb();
321 	*(vip)CIA_IOC_CIA_CTRL = ctrl;
322 	mb();
323 	*(vip)CIA_IOC_CIA_CTRL;
324 	mb();
325 }
326 
327 static inline void
328 cia_prepare_tbia_workaround(int window)
329 {
330 	unsigned long *ppte, pte;
331 	long i;
332 
333 	/* Use minimal 1K map. */
334 	ppte = memblock_alloc_from(CIA_BROKEN_TBIA_SIZE, 32768, 0);
335 	pte = (virt_to_phys(ppte) >> (PAGE_SHIFT - 1)) | 1;
336 
337 	for (i = 0; i < CIA_BROKEN_TBIA_SIZE / sizeof(unsigned long); ++i)
338 		ppte[i] = pte;
339 
340 	*(vip)CIA_IOC_PCI_Wn_BASE(window) = CIA_BROKEN_TBIA_BASE | 3;
341 	*(vip)CIA_IOC_PCI_Wn_MASK(window)
342 	  = (CIA_BROKEN_TBIA_SIZE*1024 - 1) & 0xfff00000;
343 	*(vip)CIA_IOC_PCI_Tn_BASE(window) = virt_to_phys(ppte) >> 2;
344 }
345 
346 static void __init
347 verify_tb_operation(void)
348 {
349 	static int page[PAGE_SIZE/4]
350 		__attribute__((aligned(PAGE_SIZE)))
351 		__initdata = { 0 };
352 
353 	struct pci_iommu_arena *arena = pci_isa_hose->sg_isa;
354 	int ctrl, addr0, tag0, pte0, data0;
355 	int temp, use_tbia_try2 = 0;
356 	void __iomem *bus_addr;
357 
358 	/* pyxis -- tbia is broken */
359 	if (pci_isa_hose->dense_io_base)
360 		use_tbia_try2 = 1;
361 
362 	/* Put the chip into PCI loopback mode.  */
363 	mb();
364 	ctrl = *(vip)CIA_IOC_CIA_CTRL;
365 	*(vip)CIA_IOC_CIA_CTRL = ctrl | CIA_CTRL_PCI_LOOP_EN;
366 	mb();
367 	*(vip)CIA_IOC_CIA_CTRL;
368 	mb();
369 
370 	/* Write a valid entry directly into the TLB registers.  */
371 
372 	addr0 = arena->dma_base;
373 	tag0 = addr0 | 1;
374 	pte0 = (virt_to_phys(page) >> (PAGE_SHIFT - 1)) | 1;
375 
376 	*(vip)CIA_IOC_TB_TAGn(0) = tag0;
377 	*(vip)CIA_IOC_TB_TAGn(1) = 0;
378 	*(vip)CIA_IOC_TB_TAGn(2) = 0;
379 	*(vip)CIA_IOC_TB_TAGn(3) = 0;
380 	*(vip)CIA_IOC_TB_TAGn(4) = 0;
381 	*(vip)CIA_IOC_TB_TAGn(5) = 0;
382 	*(vip)CIA_IOC_TB_TAGn(6) = 0;
383 	*(vip)CIA_IOC_TB_TAGn(7) = 0;
384 	*(vip)CIA_IOC_TBn_PAGEm(0,0) = pte0;
385 	*(vip)CIA_IOC_TBn_PAGEm(0,1) = 0;
386 	*(vip)CIA_IOC_TBn_PAGEm(0,2) = 0;
387 	*(vip)CIA_IOC_TBn_PAGEm(0,3) = 0;
388 	mb();
389 
390 	/* Get a usable bus address */
391 	bus_addr = cia_ioremap(addr0, 8*PAGE_SIZE);
392 
393 	/* First, verify we can read back what we've written.  If
394 	   this fails, we can't be sure of any of the other testing
395 	   we're going to do, so bail.  */
396 	/* ??? Actually, we could do the work with machine checks.
397 	   By passing this register update test, we pretty much
398 	   guarantee that cia_pci_tbi_try1 works.  If this test
399 	   fails, cia_pci_tbi_try2 might still work.  */
400 
401 	temp = *(vip)CIA_IOC_TB_TAGn(0);
402 	if (temp != tag0) {
403 		printk("pci: failed tb register update test "
404 		       "(tag0 %#x != %#x)\n", temp, tag0);
405 		goto failed;
406 	}
407 	temp = *(vip)CIA_IOC_TB_TAGn(1);
408 	if (temp != 0) {
409 		printk("pci: failed tb register update test "
410 		       "(tag1 %#x != 0)\n", temp);
411 		goto failed;
412 	}
413 	temp = *(vip)CIA_IOC_TBn_PAGEm(0,0);
414 	if (temp != pte0) {
415 		printk("pci: failed tb register update test "
416 		       "(pte0 %#x != %#x)\n", temp, pte0);
417 		goto failed;
418 	}
419 	printk("pci: passed tb register update test\n");
420 
421 	/* Second, verify we can actually do I/O through this entry.  */
422 
423 	data0 = 0xdeadbeef;
424 	page[0] = data0;
425 	mcheck_expected(0) = 1;
426 	mcheck_taken(0) = 0;
427 	mb();
428 	temp = cia_readl(bus_addr);
429 	mb();
430 	mcheck_expected(0) = 0;
431 	mb();
432 	if (mcheck_taken(0)) {
433 		printk("pci: failed sg loopback i/o read test (mcheck)\n");
434 		goto failed;
435 	}
436 	if (temp != data0) {
437 		printk("pci: failed sg loopback i/o read test "
438 		       "(%#x != %#x)\n", temp, data0);
439 		goto failed;
440 	}
441 	printk("pci: passed sg loopback i/o read test\n");
442 
443 	/* Third, try to invalidate the TLB.  */
444 
445 	if (! use_tbia_try2) {
446 		cia_pci_tbi(arena->hose, 0, -1);
447 		temp = *(vip)CIA_IOC_TB_TAGn(0);
448 		if (temp & 1) {
449 			use_tbia_try2 = 1;
450 			printk("pci: failed tbia test; workaround available\n");
451 		} else {
452 			printk("pci: passed tbia test\n");
453 		}
454 	}
455 
456 	/* Fourth, verify the TLB snoops the EV5's caches when
457 	   doing a tlb fill.  */
458 
459 	data0 = 0x5adda15e;
460 	page[0] = data0;
461 	arena->ptes[4] = pte0;
462 	mcheck_expected(0) = 1;
463 	mcheck_taken(0) = 0;
464 	mb();
465 	temp = cia_readl(bus_addr + 4*PAGE_SIZE);
466 	mb();
467 	mcheck_expected(0) = 0;
468 	mb();
469 	if (mcheck_taken(0)) {
470 		printk("pci: failed pte write cache snoop test (mcheck)\n");
471 		goto failed;
472 	}
473 	if (temp != data0) {
474 		printk("pci: failed pte write cache snoop test "
475 		       "(%#x != %#x)\n", temp, data0);
476 		goto failed;
477 	}
478 	printk("pci: passed pte write cache snoop test\n");
479 
480 	/* Fifth, verify that a previously invalid PTE entry gets
481 	   filled from the page table.  */
482 
483 	data0 = 0xabcdef12;
484 	page[0] = data0;
485 	arena->ptes[5] = pte0;
486 	mcheck_expected(0) = 1;
487 	mcheck_taken(0) = 0;
488 	mb();
489 	temp = cia_readl(bus_addr + 5*PAGE_SIZE);
490 	mb();
491 	mcheck_expected(0) = 0;
492 	mb();
493 	if (mcheck_taken(0)) {
494 		printk("pci: failed valid tag invalid pte reload test "
495 		       "(mcheck; workaround available)\n");
496 		/* Work around this bug by aligning new allocations
497 		   on 4 page boundaries.  */
498 		arena->align_entry = 4;
499 	} else if (temp != data0) {
500 		printk("pci: failed valid tag invalid pte reload test "
501 		       "(%#x != %#x)\n", temp, data0);
502 		goto failed;
503 	} else {
504 		printk("pci: passed valid tag invalid pte reload test\n");
505 	}
506 
507 	/* Sixth, verify machine checks are working.  Test invalid
508 	   pte under the same valid tag as we used above.  */
509 
510 	mcheck_expected(0) = 1;
511 	mcheck_taken(0) = 0;
512 	mb();
513 	temp = cia_readl(bus_addr + 6*PAGE_SIZE);
514 	mb();
515 	mcheck_expected(0) = 0;
516 	mb();
517 	printk("pci: %s pci machine check test\n",
518 	       mcheck_taken(0) ? "passed" : "failed");
519 
520 	/* Clean up after the tests.  */
521 	arena->ptes[4] = 0;
522 	arena->ptes[5] = 0;
523 
524 	if (use_tbia_try2) {
525 		alpha_mv.mv_pci_tbi = cia_pci_tbi_try2;
526 
527 		/* Tags 0-3 must be disabled if we use this workaraund. */
528 		wmb();
529 		*(vip)CIA_IOC_TB_TAGn(0) = 2;
530 		*(vip)CIA_IOC_TB_TAGn(1) = 2;
531 		*(vip)CIA_IOC_TB_TAGn(2) = 2;
532 		*(vip)CIA_IOC_TB_TAGn(3) = 2;
533 
534 		printk("pci: tbia workaround enabled\n");
535 	}
536 	alpha_mv.mv_pci_tbi(arena->hose, 0, -1);
537 
538 exit:
539 	/* unmap the bus addr */
540 	cia_iounmap(bus_addr);
541 
542 	/* Restore normal PCI operation.  */
543 	mb();
544 	*(vip)CIA_IOC_CIA_CTRL = ctrl;
545 	mb();
546 	*(vip)CIA_IOC_CIA_CTRL;
547 	mb();
548 	return;
549 
550 failed:
551 	printk("pci: disabling sg translation window\n");
552 	*(vip)CIA_IOC_PCI_W0_BASE = 0;
553 	*(vip)CIA_IOC_PCI_W1_BASE = 0;
554 	pci_isa_hose->sg_isa = NULL;
555 	alpha_mv.mv_pci_tbi = NULL;
556 	goto exit;
557 }
558 
559 #if defined(ALPHA_RESTORE_SRM_SETUP)
560 /* Save CIA configuration data as the console had it set up.  */
561 struct
562 {
563     unsigned int hae_mem;
564     unsigned int hae_io;
565     unsigned int pci_dac_offset;
566     unsigned int err_mask;
567     unsigned int cia_ctrl;
568     unsigned int cia_cnfg;
569     struct {
570 	unsigned int w_base;
571 	unsigned int w_mask;
572 	unsigned int t_base;
573     } window[4];
574 } saved_config __attribute((common));
575 
576 void
577 cia_save_srm_settings(int is_pyxis)
578 {
579 	int i;
580 
581 	/* Save some important registers. */
582 	saved_config.err_mask       = *(vip)CIA_IOC_ERR_MASK;
583 	saved_config.cia_ctrl       = *(vip)CIA_IOC_CIA_CTRL;
584 	saved_config.hae_mem        = *(vip)CIA_IOC_HAE_MEM;
585 	saved_config.hae_io         = *(vip)CIA_IOC_HAE_IO;
586 	saved_config.pci_dac_offset = *(vip)CIA_IOC_PCI_W_DAC;
587 
588 	if (is_pyxis)
589 	    saved_config.cia_cnfg   = *(vip)CIA_IOC_CIA_CNFG;
590 	else
591 	    saved_config.cia_cnfg   = 0;
592 
593 	/* Save DMA windows configuration. */
594 	for (i = 0; i < 4; i++) {
595 	    saved_config.window[i].w_base = *(vip)CIA_IOC_PCI_Wn_BASE(i);
596 	    saved_config.window[i].w_mask = *(vip)CIA_IOC_PCI_Wn_MASK(i);
597 	    saved_config.window[i].t_base = *(vip)CIA_IOC_PCI_Tn_BASE(i);
598 	}
599 	mb();
600 }
601 
602 void
603 cia_restore_srm_settings(void)
604 {
605 	int i;
606 
607 	for (i = 0; i < 4; i++) {
608 	    *(vip)CIA_IOC_PCI_Wn_BASE(i) = saved_config.window[i].w_base;
609 	    *(vip)CIA_IOC_PCI_Wn_MASK(i) = saved_config.window[i].w_mask;
610 	    *(vip)CIA_IOC_PCI_Tn_BASE(i) = saved_config.window[i].t_base;
611 	}
612 
613 	*(vip)CIA_IOC_HAE_MEM   = saved_config.hae_mem;
614 	*(vip)CIA_IOC_HAE_IO    = saved_config.hae_io;
615 	*(vip)CIA_IOC_PCI_W_DAC = saved_config.pci_dac_offset;
616 	*(vip)CIA_IOC_ERR_MASK  = saved_config.err_mask;
617 	*(vip)CIA_IOC_CIA_CTRL  = saved_config.cia_ctrl;
618 
619 	if (saved_config.cia_cnfg) /* Must be pyxis. */
620 	    *(vip)CIA_IOC_CIA_CNFG  = saved_config.cia_cnfg;
621 
622 	mb();
623 }
624 #else /* ALPHA_RESTORE_SRM_SETUP */
625 #define cia_save_srm_settings(p)	do {} while (0)
626 #define cia_restore_srm_settings()	do {} while (0)
627 #endif /* ALPHA_RESTORE_SRM_SETUP */
628 
629 
630 static void __init
631 do_init_arch(int is_pyxis)
632 {
633 	struct pci_controller *hose;
634 	int temp, cia_rev, tbia_window;
635 
636 	cia_rev = *(vip)CIA_IOC_CIA_REV & CIA_REV_MASK;
637 	printk("pci: cia revision %d%s\n",
638 	       cia_rev, is_pyxis ? " (pyxis)" : "");
639 
640 	if (alpha_using_srm)
641 		cia_save_srm_settings(is_pyxis);
642 
643 	/* Set up error reporting.  */
644 	temp = *(vip)CIA_IOC_ERR_MASK;
645 	temp &= ~(CIA_ERR_CPU_PE | CIA_ERR_MEM_NEM | CIA_ERR_PA_PTE_INV
646 		  | CIA_ERR_RCVD_MAS_ABT | CIA_ERR_RCVD_TAR_ABT);
647 	*(vip)CIA_IOC_ERR_MASK = temp;
648 
649 	/* Clear all currently pending errors.  */
650 	temp = *(vip)CIA_IOC_CIA_ERR;
651 	*(vip)CIA_IOC_CIA_ERR = temp;
652 
653 	/* Turn on mchecks.  */
654 	temp = *(vip)CIA_IOC_CIA_CTRL;
655 	temp |= CIA_CTRL_FILL_ERR_EN | CIA_CTRL_MCHK_ERR_EN;
656 	*(vip)CIA_IOC_CIA_CTRL = temp;
657 
658 	/* Clear the CFG register, which gets used for PCI config space
659 	   accesses.  That is the way we want to use it, and we do not
660 	   want to depend on what ARC or SRM might have left behind.  */
661 	*(vip)CIA_IOC_CFG = 0;
662 
663 	/* Zero the HAEs.  */
664 	*(vip)CIA_IOC_HAE_MEM = 0;
665 	*(vip)CIA_IOC_HAE_IO = 0;
666 
667 	/* For PYXIS, we always use BWX bus and i/o accesses.  To that end,
668 	   make sure they're enabled on the controller.  At the same time,
669 	   enable the monster window.  */
670 	if (is_pyxis) {
671 		temp = *(vip)CIA_IOC_CIA_CNFG;
672 		temp |= CIA_CNFG_IOA_BWEN | CIA_CNFG_PCI_MWEN;
673 		*(vip)CIA_IOC_CIA_CNFG = temp;
674 	}
675 
676 	/* Synchronize with all previous changes.  */
677 	mb();
678 	*(vip)CIA_IOC_CIA_REV;
679 
680 	/*
681 	 * Create our single hose.
682 	 */
683 
684 	pci_isa_hose = hose = alloc_pci_controller();
685 	hose->io_space = &ioport_resource;
686 	hose->mem_space = &iomem_resource;
687 	hose->index = 0;
688 
689 	if (! is_pyxis) {
690 		struct resource *hae_mem = alloc_resource();
691 		hose->mem_space = hae_mem;
692 
693 		hae_mem->start = 0;
694 		hae_mem->end = CIA_MEM_R1_MASK;
695 		hae_mem->name = pci_hae0_name;
696 		hae_mem->flags = IORESOURCE_MEM;
697 
698 		if (request_resource(&iomem_resource, hae_mem) < 0)
699 			printk(KERN_ERR "Failed to request HAE_MEM\n");
700 
701 		hose->sparse_mem_base = CIA_SPARSE_MEM - IDENT_ADDR;
702 		hose->dense_mem_base = CIA_DENSE_MEM - IDENT_ADDR;
703 		hose->sparse_io_base = CIA_IO - IDENT_ADDR;
704 		hose->dense_io_base = 0;
705 	} else {
706 		hose->sparse_mem_base = 0;
707 		hose->dense_mem_base = CIA_BW_MEM - IDENT_ADDR;
708 		hose->sparse_io_base = 0;
709 		hose->dense_io_base = CIA_BW_IO - IDENT_ADDR;
710 	}
711 
712 	/*
713 	 * Set up the PCI to main memory translation windows.
714 	 *
715 	 * Window 0 is S/G 8MB at 8MB (for isa)
716 	 * Window 1 is S/G 1MB at 768MB (for tbia) (unused for CIA rev 1)
717 	 * Window 2 is direct access 2GB at 2GB
718 	 * Window 3 is DAC access 4GB at 8GB (or S/G for tbia if CIA rev 1)
719 	 *
720 	 * ??? NetBSD hints that page tables must be aligned to 32K,
721 	 * possibly due to a hardware bug.  This is over-aligned
722 	 * from the 8K alignment one would expect for an 8MB window.
723 	 * No description of what revisions affected.
724 	 */
725 
726 	hose->sg_pci = NULL;
727 	hose->sg_isa = iommu_arena_new(hose, 0x00800000, 0x00800000, 32768);
728 
729 	__direct_map_base = 0x80000000;
730 	__direct_map_size = 0x80000000;
731 
732 	*(vip)CIA_IOC_PCI_W0_BASE = hose->sg_isa->dma_base | 3;
733 	*(vip)CIA_IOC_PCI_W0_MASK = (hose->sg_isa->size - 1) & 0xfff00000;
734 	*(vip)CIA_IOC_PCI_T0_BASE = virt_to_phys(hose->sg_isa->ptes) >> 2;
735 
736 	*(vip)CIA_IOC_PCI_W2_BASE = __direct_map_base | 1;
737 	*(vip)CIA_IOC_PCI_W2_MASK = (__direct_map_size - 1) & 0xfff00000;
738 	*(vip)CIA_IOC_PCI_T2_BASE = 0 >> 2;
739 
740 	/* On PYXIS we have the monster window, selected by bit 40, so
741 	   there is no need for window3 to be enabled.
742 
743 	   On CIA, we don't have true arbitrary addressing -- bits <39:32>
744 	   are compared against W_DAC.  We can, however, directly map 4GB,
745 	   which is better than before.  However, due to assumptions made
746 	   elsewhere, we should not claim that we support DAC unless that
747 	   4GB covers all of physical memory.
748 
749 	   On CIA rev 1, apparently W1 and W2 can't be used for SG.
750 	   At least, there are reports that it doesn't work for Alcor.
751 	   In that case, we have no choice but to use W3 for the TBIA
752 	   workaround, which means we can't use DAC at all. */
753 
754 	tbia_window = 1;
755 	if (is_pyxis) {
756 		*(vip)CIA_IOC_PCI_W3_BASE = 0;
757 	} else if (cia_rev == 1) {
758 		*(vip)CIA_IOC_PCI_W1_BASE = 0;
759 		tbia_window = 3;
760 	} else if (max_low_pfn > (0x100000000UL >> PAGE_SHIFT)) {
761 		*(vip)CIA_IOC_PCI_W3_BASE = 0;
762 	} else {
763 		*(vip)CIA_IOC_PCI_W3_BASE = 0x00000000 | 1 | 8;
764 		*(vip)CIA_IOC_PCI_W3_MASK = 0xfff00000;
765 		*(vip)CIA_IOC_PCI_T3_BASE = 0 >> 2;
766 
767 		alpha_mv.pci_dac_offset = 0x200000000UL;
768 		*(vip)CIA_IOC_PCI_W_DAC = alpha_mv.pci_dac_offset >> 32;
769 	}
770 
771 	/* Prepare workaround for apparently broken tbia. */
772 	cia_prepare_tbia_workaround(tbia_window);
773 }
774 
775 void __init
776 cia_init_arch(void)
777 {
778 	do_init_arch(0);
779 }
780 
781 void __init
782 pyxis_init_arch(void)
783 {
784 	/* On pyxis machines we can precisely calculate the
785 	   CPU clock frequency using pyxis real time counter.
786 	   It's especially useful for SX164 with broken RTC.
787 
788 	   Both CPU and chipset are driven by the single 16.666M
789 	   or 16.667M crystal oscillator. PYXIS_RT_COUNT clock is
790 	   66.66 MHz. -ink */
791 
792 	unsigned int cc0, cc1;
793 	unsigned long pyxis_cc;
794 
795 	__asm__ __volatile__ ("rpcc %0" : "=r"(cc0));
796 	pyxis_cc = *(vulp)PYXIS_RT_COUNT;
797 	do { } while(*(vulp)PYXIS_RT_COUNT - pyxis_cc < 4096);
798 	__asm__ __volatile__ ("rpcc %0" : "=r"(cc1));
799 	cc1 -= cc0;
800 	hwrpb->cycle_freq = ((cc1 >> 11) * 100000000UL) / 3;
801 	hwrpb_update_checksum(hwrpb);
802 
803 	do_init_arch(1);
804 }
805 
806 void
807 cia_kill_arch(int mode)
808 {
809 	if (alpha_using_srm)
810 		cia_restore_srm_settings();
811 }
812 
813 void __init
814 cia_init_pci(void)
815 {
816 	/* Must delay this from init_arch, as we need machine checks.  */
817 	verify_tb_operation();
818 	common_init_pci();
819 }
820 
821 static inline void
822 cia_pci_clr_err(void)
823 {
824 	int jd;
825 
826 	jd = *(vip)CIA_IOC_CIA_ERR;
827 	*(vip)CIA_IOC_CIA_ERR = jd;
828 	mb();
829 	*(vip)CIA_IOC_CIA_ERR;		/* re-read to force write.  */
830 }
831 
832 #ifdef CONFIG_VERBOSE_MCHECK
833 static void
834 cia_decode_pci_error(struct el_CIA_sysdata_mcheck *cia, const char *msg)
835 {
836 	static const char * const pci_cmd_desc[16] = {
837 		"Interrupt Acknowledge", "Special Cycle", "I/O Read",
838 		"I/O Write", "Reserved 0x4", "Reserved 0x5", "Memory Read",
839 		"Memory Write", "Reserved 0x8", "Reserved 0x9",
840 		"Configuration Read", "Configuration Write",
841 		"Memory Read Multiple", "Dual Address Cycle",
842 		"Memory Read Line", "Memory Write and Invalidate"
843 	};
844 
845 	if (cia->cia_err & (CIA_ERR_COR_ERR
846 			    | CIA_ERR_UN_COR_ERR
847 			    | CIA_ERR_MEM_NEM
848 			    | CIA_ERR_PA_PTE_INV)) {
849 		static const char * const window_desc[6] = {
850 			"No window active", "Window 0 hit", "Window 1 hit",
851 			"Window 2 hit", "Window 3 hit", "Monster window hit"
852 		};
853 
854 		const char *window;
855 		const char *cmd;
856 		unsigned long addr, tmp;
857 		int lock, dac;
858 
859 		cmd = pci_cmd_desc[cia->pci_err0 & 0x7];
860 		lock = (cia->pci_err0 >> 4) & 1;
861 		dac = (cia->pci_err0 >> 5) & 1;
862 
863 		tmp = (cia->pci_err0 >> 8) & 0x1F;
864 		tmp = ffs(tmp);
865 		window = window_desc[tmp];
866 
867 		addr = cia->pci_err1;
868 		if (dac) {
869 			tmp = *(vip)CIA_IOC_PCI_W_DAC & 0xFFUL;
870 			addr |= tmp << 32;
871 		}
872 
873 		printk(KERN_CRIT "CIA machine check: %s\n", msg);
874 		printk(KERN_CRIT "  DMA command: %s\n", cmd);
875 		printk(KERN_CRIT "  PCI address: %#010lx\n", addr);
876 		printk(KERN_CRIT "  %s, Lock: %d, DAC: %d\n",
877 		       window, lock, dac);
878 	} else if (cia->cia_err & (CIA_ERR_PERR
879 				   | CIA_ERR_PCI_ADDR_PE
880 				   | CIA_ERR_RCVD_MAS_ABT
881 				   | CIA_ERR_RCVD_TAR_ABT
882 				   | CIA_ERR_IOA_TIMEOUT)) {
883 		static const char * const master_st_desc[16] = {
884 			"Idle", "Drive bus", "Address step cycle",
885 			"Address cycle", "Data cycle", "Last read data cycle",
886 			"Last write data cycle", "Read stop cycle",
887 			"Write stop cycle", "Read turnaround cycle",
888 			"Write turnaround cycle", "Reserved 0xB",
889 			"Reserved 0xC", "Reserved 0xD", "Reserved 0xE",
890 			"Unknown state"
891 		};
892 		static const char * const target_st_desc[16] = {
893 			"Idle", "Busy", "Read data cycle", "Write data cycle",
894 			"Read stop cycle", "Write stop cycle",
895 			"Read turnaround cycle", "Write turnaround cycle",
896 			"Read wait cycle", "Write wait cycle",
897 			"Reserved 0xA", "Reserved 0xB", "Reserved 0xC",
898 			"Reserved 0xD", "Reserved 0xE", "Unknown state"
899 		};
900 
901 		const char *cmd;
902 		const char *master, *target;
903 		unsigned long addr, tmp;
904 		int dac;
905 
906 		master = master_st_desc[(cia->pci_err0 >> 16) & 0xF];
907 		target = target_st_desc[(cia->pci_err0 >> 20) & 0xF];
908 		cmd = pci_cmd_desc[(cia->pci_err0 >> 24) & 0xF];
909 		dac = (cia->pci_err0 >> 28) & 1;
910 
911 		addr = cia->pci_err2;
912 		if (dac) {
913 			tmp = *(volatile int *)CIA_IOC_PCI_W_DAC & 0xFFUL;
914 			addr |= tmp << 32;
915 		}
916 
917 		printk(KERN_CRIT "CIA machine check: %s\n", msg);
918 		printk(KERN_CRIT "  PCI command: %s\n", cmd);
919 		printk(KERN_CRIT "  Master state: %s, Target state: %s\n",
920 		       master, target);
921 		printk(KERN_CRIT "  PCI address: %#010lx, DAC: %d\n",
922 		       addr, dac);
923 	} else {
924 		printk(KERN_CRIT "CIA machine check: %s\n", msg);
925 		printk(KERN_CRIT "  Unknown PCI error\n");
926 		printk(KERN_CRIT "  PCI_ERR0 = %#08lx", cia->pci_err0);
927 		printk(KERN_CRIT "  PCI_ERR1 = %#08lx", cia->pci_err1);
928 		printk(KERN_CRIT "  PCI_ERR2 = %#08lx", cia->pci_err2);
929 	}
930 }
931 
932 static void
933 cia_decode_mem_error(struct el_CIA_sysdata_mcheck *cia, const char *msg)
934 {
935 	unsigned long mem_port_addr;
936 	unsigned long mem_port_mask;
937 	const char *mem_port_cmd;
938 	const char *seq_state;
939 	const char *set_select;
940 	unsigned long tmp;
941 
942 	/* If this is a DMA command, also decode the PCI bits.  */
943 	if ((cia->mem_err1 >> 20) & 1)
944 		cia_decode_pci_error(cia, msg);
945 	else
946 		printk(KERN_CRIT "CIA machine check: %s\n", msg);
947 
948 	mem_port_addr = cia->mem_err0 & 0xfffffff0;
949 	mem_port_addr |= (cia->mem_err1 & 0x83UL) << 32;
950 
951 	mem_port_mask = (cia->mem_err1 >> 12) & 0xF;
952 
953 	tmp = (cia->mem_err1 >> 8) & 0xF;
954 	tmp |= ((cia->mem_err1 >> 20) & 1) << 4;
955 	if ((tmp & 0x1E) == 0x06)
956 		mem_port_cmd = "WRITE BLOCK or WRITE BLOCK LOCK";
957 	else if ((tmp & 0x1C) == 0x08)
958 		mem_port_cmd = "READ MISS or READ MISS MODIFY";
959 	else if (tmp == 0x1C)
960 		mem_port_cmd = "BC VICTIM";
961 	else if ((tmp & 0x1E) == 0x0E)
962 		mem_port_cmd = "READ MISS MODIFY";
963 	else if ((tmp & 0x1C) == 0x18)
964 		mem_port_cmd = "DMA READ or DMA READ MODIFY";
965 	else if ((tmp & 0x1E) == 0x12)
966 		mem_port_cmd = "DMA WRITE";
967 	else
968 		mem_port_cmd = "Unknown";
969 
970 	tmp = (cia->mem_err1 >> 16) & 0xF;
971 	switch (tmp) {
972 	case 0x0:
973 		seq_state = "Idle";
974 		break;
975 	case 0x1:
976 		seq_state = "DMA READ or DMA WRITE";
977 		break;
978 	case 0x2: case 0x3:
979 		seq_state = "READ MISS (or READ MISS MODIFY) with victim";
980 		break;
981 	case 0x4: case 0x5: case 0x6:
982 		seq_state = "READ MISS (or READ MISS MODIFY) with no victim";
983 		break;
984 	case 0x8: case 0x9: case 0xB:
985 		seq_state = "Refresh";
986 		break;
987 	case 0xC:
988 		seq_state = "Idle, waiting for DMA pending read";
989 		break;
990 	case 0xE: case 0xF:
991 		seq_state = "Idle, ras precharge";
992 		break;
993 	default:
994 		seq_state = "Unknown";
995 		break;
996 	}
997 
998 	tmp = (cia->mem_err1 >> 24) & 0x1F;
999 	switch (tmp) {
1000 	case 0x00: set_select = "Set 0 selected"; break;
1001 	case 0x01: set_select = "Set 1 selected"; break;
1002 	case 0x02: set_select = "Set 2 selected"; break;
1003 	case 0x03: set_select = "Set 3 selected"; break;
1004 	case 0x04: set_select = "Set 4 selected"; break;
1005 	case 0x05: set_select = "Set 5 selected"; break;
1006 	case 0x06: set_select = "Set 6 selected"; break;
1007 	case 0x07: set_select = "Set 7 selected"; break;
1008 	case 0x08: set_select = "Set 8 selected"; break;
1009 	case 0x09: set_select = "Set 9 selected"; break;
1010 	case 0x0A: set_select = "Set A selected"; break;
1011 	case 0x0B: set_select = "Set B selected"; break;
1012 	case 0x0C: set_select = "Set C selected"; break;
1013 	case 0x0D: set_select = "Set D selected"; break;
1014 	case 0x0E: set_select = "Set E selected"; break;
1015 	case 0x0F: set_select = "Set F selected"; break;
1016 	case 0x10: set_select = "No set selected"; break;
1017 	case 0x1F: set_select = "Refresh cycle"; break;
1018 	default:   set_select = "Unknown"; break;
1019 	}
1020 
1021 	printk(KERN_CRIT "  Memory port command: %s\n", mem_port_cmd);
1022 	printk(KERN_CRIT "  Memory port address: %#010lx, mask: %#lx\n",
1023 	       mem_port_addr, mem_port_mask);
1024 	printk(KERN_CRIT "  Memory sequencer state: %s\n", seq_state);
1025 	printk(KERN_CRIT "  Memory set: %s\n", set_select);
1026 }
1027 
1028 static void
1029 cia_decode_ecc_error(struct el_CIA_sysdata_mcheck *cia, const char *msg)
1030 {
1031 	long syn;
1032 	long i;
1033 	const char *fmt;
1034 
1035 	cia_decode_mem_error(cia, msg);
1036 
1037 	syn = cia->cia_syn & 0xff;
1038 	if (syn == (syn & -syn)) {
1039 		fmt = KERN_CRIT "  ECC syndrome %#x -- check bit %d\n";
1040 		i = ffs(syn) - 1;
1041 	} else {
1042 		static unsigned char const data_bit[64] = {
1043 			0xCE, 0xCB, 0xD3, 0xD5,
1044 			0xD6, 0xD9, 0xDA, 0xDC,
1045 			0x23, 0x25, 0x26, 0x29,
1046 			0x2A, 0x2C, 0x31, 0x34,
1047 			0x0E, 0x0B, 0x13, 0x15,
1048 			0x16, 0x19, 0x1A, 0x1C,
1049 			0xE3, 0xE5, 0xE6, 0xE9,
1050 			0xEA, 0xEC, 0xF1, 0xF4,
1051 			0x4F, 0x4A, 0x52, 0x54,
1052 			0x57, 0x58, 0x5B, 0x5D,
1053 			0xA2, 0xA4, 0xA7, 0xA8,
1054 			0xAB, 0xAD, 0xB0, 0xB5,
1055 			0x8F, 0x8A, 0x92, 0x94,
1056 			0x97, 0x98, 0x9B, 0x9D,
1057 			0x62, 0x64, 0x67, 0x68,
1058 			0x6B, 0x6D, 0x70, 0x75
1059 		};
1060 
1061 		for (i = 0; i < 64; ++i)
1062 			if (data_bit[i] == syn)
1063 				break;
1064 
1065 		if (i < 64)
1066 			fmt = KERN_CRIT "  ECC syndrome %#x -- data bit %d\n";
1067 		else
1068 			fmt = KERN_CRIT "  ECC syndrome %#x -- unknown bit\n";
1069 	}
1070 
1071 	printk (fmt, syn, i);
1072 }
1073 
1074 static void
1075 cia_decode_parity_error(struct el_CIA_sysdata_mcheck *cia)
1076 {
1077 	static const char * const cmd_desc[16] = {
1078 		"NOP", "LOCK", "FETCH", "FETCH_M", "MEMORY BARRIER",
1079 		"SET DIRTY", "WRITE BLOCK", "WRITE BLOCK LOCK",
1080 		"READ MISS0", "READ MISS1", "READ MISS MOD0",
1081 		"READ MISS MOD1", "BCACHE VICTIM", "Spare",
1082 		"READ MISS MOD STC0", "READ MISS MOD STC1"
1083 	};
1084 
1085 	unsigned long addr;
1086 	unsigned long mask;
1087 	const char *cmd;
1088 	int par;
1089 
1090 	addr = cia->cpu_err0 & 0xfffffff0;
1091 	addr |= (cia->cpu_err1 & 0x83UL) << 32;
1092 	cmd = cmd_desc[(cia->cpu_err1 >> 8) & 0xF];
1093 	mask = (cia->cpu_err1 >> 12) & 0xF;
1094 	par = (cia->cpu_err1 >> 21) & 1;
1095 
1096 	printk(KERN_CRIT "CIA machine check: System bus parity error\n");
1097 	printk(KERN_CRIT "  Command: %s, Parity bit: %d\n", cmd, par);
1098 	printk(KERN_CRIT "  Address: %#010lx, Mask: %#lx\n", addr, mask);
1099 }
1100 #endif /* CONFIG_VERBOSE_MCHECK */
1101 
1102 
1103 static int
1104 cia_decode_mchk(unsigned long la_ptr)
1105 {
1106 	struct el_common *com;
1107 	struct el_CIA_sysdata_mcheck *cia;
1108 
1109 	com = (void *)la_ptr;
1110 	cia = (void *)(la_ptr + com->sys_offset);
1111 
1112 	if ((cia->cia_err & CIA_ERR_VALID) == 0)
1113 		return 0;
1114 
1115 #ifdef CONFIG_VERBOSE_MCHECK
1116 	if (!alpha_verbose_mcheck)
1117 		return 1;
1118 
1119 	switch (ffs(cia->cia_err & 0xfff) - 1) {
1120 	case 0: /* CIA_ERR_COR_ERR */
1121 		cia_decode_ecc_error(cia, "Corrected ECC error");
1122 		break;
1123 	case 1: /* CIA_ERR_UN_COR_ERR */
1124 		cia_decode_ecc_error(cia, "Uncorrected ECC error");
1125 		break;
1126 	case 2: /* CIA_ERR_CPU_PE */
1127 		cia_decode_parity_error(cia);
1128 		break;
1129 	case 3: /* CIA_ERR_MEM_NEM */
1130 		cia_decode_mem_error(cia, "Access to nonexistent memory");
1131 		break;
1132 	case 4: /* CIA_ERR_PCI_SERR */
1133 		cia_decode_pci_error(cia, "PCI bus system error");
1134 		break;
1135 	case 5: /* CIA_ERR_PERR */
1136 		cia_decode_pci_error(cia, "PCI data parity error");
1137 		break;
1138 	case 6: /* CIA_ERR_PCI_ADDR_PE */
1139 		cia_decode_pci_error(cia, "PCI address parity error");
1140 		break;
1141 	case 7: /* CIA_ERR_RCVD_MAS_ABT */
1142 		cia_decode_pci_error(cia, "PCI master abort");
1143 		break;
1144 	case 8: /* CIA_ERR_RCVD_TAR_ABT */
1145 		cia_decode_pci_error(cia, "PCI target abort");
1146 		break;
1147 	case 9: /* CIA_ERR_PA_PTE_INV */
1148 		cia_decode_pci_error(cia, "PCI invalid PTE");
1149 		break;
1150 	case 10: /* CIA_ERR_FROM_WRT_ERR */
1151 		cia_decode_mem_error(cia, "Write to flash ROM attempted");
1152 		break;
1153 	case 11: /* CIA_ERR_IOA_TIMEOUT */
1154 		cia_decode_pci_error(cia, "I/O timeout");
1155 		break;
1156 	}
1157 
1158 	if (cia->cia_err & CIA_ERR_LOST_CORR_ERR)
1159 		printk(KERN_CRIT "CIA lost machine check: "
1160 		       "Correctable ECC error\n");
1161 	if (cia->cia_err & CIA_ERR_LOST_UN_CORR_ERR)
1162 		printk(KERN_CRIT "CIA lost machine check: "
1163 		       "Uncorrectable ECC error\n");
1164 	if (cia->cia_err & CIA_ERR_LOST_CPU_PE)
1165 		printk(KERN_CRIT "CIA lost machine check: "
1166 		       "System bus parity error\n");
1167 	if (cia->cia_err & CIA_ERR_LOST_MEM_NEM)
1168 		printk(KERN_CRIT "CIA lost machine check: "
1169 		       "Access to nonexistent memory\n");
1170 	if (cia->cia_err & CIA_ERR_LOST_PERR)
1171 		printk(KERN_CRIT "CIA lost machine check: "
1172 		       "PCI data parity error\n");
1173 	if (cia->cia_err & CIA_ERR_LOST_PCI_ADDR_PE)
1174 		printk(KERN_CRIT "CIA lost machine check: "
1175 		       "PCI address parity error\n");
1176 	if (cia->cia_err & CIA_ERR_LOST_RCVD_MAS_ABT)
1177 		printk(KERN_CRIT "CIA lost machine check: "
1178 		       "PCI master abort\n");
1179 	if (cia->cia_err & CIA_ERR_LOST_RCVD_TAR_ABT)
1180 		printk(KERN_CRIT "CIA lost machine check: "
1181 		       "PCI target abort\n");
1182 	if (cia->cia_err & CIA_ERR_LOST_PA_PTE_INV)
1183 		printk(KERN_CRIT "CIA lost machine check: "
1184 		       "PCI invalid PTE\n");
1185 	if (cia->cia_err & CIA_ERR_LOST_FROM_WRT_ERR)
1186 		printk(KERN_CRIT "CIA lost machine check: "
1187 		       "Write to flash ROM attempted\n");
1188 	if (cia->cia_err & CIA_ERR_LOST_IOA_TIMEOUT)
1189 		printk(KERN_CRIT "CIA lost machine check: "
1190 		       "I/O timeout\n");
1191 #endif /* CONFIG_VERBOSE_MCHECK */
1192 
1193 	return 1;
1194 }
1195 
1196 void
1197 cia_machine_check(unsigned long vector, unsigned long la_ptr)
1198 {
1199 	int expected;
1200 
1201 	/* Clear the error before any reporting.  */
1202 	mb();
1203 	mb();  /* magic */
1204 	draina();
1205 	cia_pci_clr_err();
1206 	wrmces(rdmces());	/* reset machine check pending flag.  */
1207 	mb();
1208 
1209 	expected = mcheck_expected(0);
1210 	if (!expected && vector == 0x660)
1211 		expected = cia_decode_mchk(la_ptr);
1212 	process_mcheck_info(vector, la_ptr, "CIA", expected);
1213 }
1214