xref: /linux/arch/alpha/Kconfig (revision 2573c25e2c482b53b6e1142ff3cd28f6de13e659)
1# SPDX-License-Identifier: GPL-2.0
2config ALPHA
3	bool
4	default y
5	select ARCH_32BIT_USTAT_F_TINODE
6	select ARCH_HAS_CURRENT_STACK_POINTER
7	select ARCH_MIGHT_HAVE_PC_PARPORT
8	select ARCH_MIGHT_HAVE_PC_SERIO
9	select ARCH_NO_PREEMPT
10	select ARCH_NO_SG_CHAIN
11	select ARCH_USE_CMPXCHG_LOCKREF
12	select DMA_OPS if PCI
13	select FORCE_PCI if !ALPHA_JENSEN
14	select PCI_DOMAINS if PCI
15	select PCI_SYSCALL if PCI
16	select HAVE_ASM_MODVERSIONS
17	select HAVE_PAGE_SIZE_8KB
18	select HAVE_PCSPKR_PLATFORM
19	select HAVE_PERF_EVENTS
20	select NEED_DMA_MAP_STATE
21	select NEED_SG_DMA_LENGTH
22	select GENERIC_IRQ_PROBE
23	select GENERIC_PCI_IOMAP
24	select AUTO_IRQ_AFFINITY if SMP
25	select GENERIC_IRQ_SHOW
26	select ARCH_WANT_IPC_PARSE_VERSION
27	select ARCH_HAVE_NMI_SAFE_CMPXCHG
28	select AUDIT_ARCH
29	select GENERIC_CPU_VULNERABILITIES
30	select GENERIC_SMP_IDLE_THREAD
31	select HAS_IOPORT
32	select HAVE_ARCH_AUDITSYSCALL
33	select HAVE_MOD_ARCH_SPECIFIC
34	select LOCK_MM_AND_FIND_VMA
35	select MODULES_USE_ELF_RELA
36	select ODD_RT_SIGACTION
37	select OLD_SIGSUSPEND
38	select CPU_NO_EFFICIENT_FFS if !ALPHA_EV67
39	select MMU_GATHER_NO_RANGE
40	select SPARSEMEM_EXTREME if SPARSEMEM
41	select ZONE_DMA
42	help
43	  The Alpha is a 64-bit general-purpose processor designed and
44	  marketed by the Digital Equipment Corporation of blessed memory,
45	  now Hewlett-Packard.  The Alpha Linux project has a home page at
46	  <http://www.alphalinux.org/>.
47
48config 64BIT
49	def_bool y
50
51config MMU
52	bool
53	default y
54
55config ARCH_HAS_ILOG2_U32
56	bool
57	default n
58
59config ARCH_HAS_ILOG2_U64
60	bool
61	default n
62
63config GENERIC_CALIBRATE_DELAY
64	bool
65	default y
66
67config GENERIC_ISA_DMA
68	bool
69	default y
70
71config PGTABLE_LEVELS
72	int
73	default 3
74
75config AUDIT_ARCH
76	bool
77
78menu "System setup"
79
80choice
81	prompt "Alpha system type"
82	default ALPHA_GENERIC
83	help
84	  This is the system type of your hardware.  A "generic" kernel will
85	  run on any supported Alpha system. However, if you configure a
86	  kernel for your specific system, it will be faster and smaller.
87
88	  To find out what type of Alpha system you have, you may want to
89	  check out the Linux/Alpha FAQ, accessible on the WWW from
90	  <http://www.alphalinux.org/>. In summary:
91
92	  Alcor/Alpha-XLT     AS 600, AS 500, XL-300, XL-366
93	  Alpha-XL            XL-233, XL-266
94	  AlphaBook1          Alpha laptop
95	  Avanti              AS 200, AS 205, AS 250, AS 255, AS 300, AS 400
96	  Cabriolet           AlphaPC64, AlphaPCI64
97	  DP264               DP264 / DS20 / ES40 / DS10 / DS10L
98	  EB164               EB164 21164 evaluation board
99	  EB64+               EB64+ 21064 evaluation board
100	  EB66                EB66 21066 evaluation board
101	  EB66+               EB66+ 21066 evaluation board
102	  Jensen              DECpc 150, DEC 2000 models 300, 500
103	  LX164               AlphaPC164-LX
104	  Lynx                AS 2100A
105	  Miata               Personal Workstation 433/500/600 a/au
106	  Marvel              AlphaServer ES47 / ES80 / GS1280
107	  Mikasa              AS 1000
108	  Noname              AXPpci33, UDB (Multia)
109	  Noritake            AS 1000A, AS 600A, AS 800
110	  PC164               AlphaPC164
111	  Rawhide             AS 1200, AS 4000, AS 4100
112	  Ruffian             RPX164-2, AlphaPC164-UX, AlphaPC164-BX
113	  SX164               AlphaPC164-SX
114	  Sable               AS 2000, AS 2100
115	  Shark               DS 20L
116	  Takara              Takara (OEM)
117	  Titan               AlphaServer ES45 / DS25 / DS15
118	  Wildfire            AlphaServer GS 40/80/160/320
119
120	  If you don't know what to do, choose "generic".
121
122config ALPHA_GENERIC
123	bool "Generic"
124	depends on TTY
125	select HAVE_EISA
126	help
127	  A generic kernel will run on all supported Alpha hardware.
128
129config ALPHA_ALCOR
130	bool "Alcor/Alpha-XLT"
131	select HAVE_EISA
132	help
133	  For systems using the Digital ALCOR chipset: 5 chips (4, 64-bit data
134	  slices (Data Switch, DSW) - 208-pin PQFP and 1 control (Control, I/O
135	  Address, CIA) - a 383 pin plastic PGA).  It provides a DRAM
136	  controller (256-bit memory bus) and a PCI interface.  It also does
137	  all the work required to support an external Bcache and to maintain
138	  memory coherence when a PCI device DMAs into (or out of) memory.
139
140config ALPHA_XL
141	bool "Alpha-XL"
142	help
143	  XL-233 and XL-266-based Alpha systems.
144
145config ALPHA_BOOK1
146	bool "AlphaBook1"
147	help
148	  Dec AlphaBook1/Burns Alpha-based laptops.
149
150config ALPHA_AVANTI_CH
151	bool "Avanti"
152
153config ALPHA_CABRIOLET
154	bool "Cabriolet"
155	help
156	  Cabriolet AlphaPC64, AlphaPCI64 systems.  Derived from EB64+ but now
157	  baby-AT with Flash boot ROM, no on-board SCSI or Ethernet. 3 ISA
158	  slots, 4 PCI slots (one pair are on a shared slot), uses plug-in
159	  Bcache SIMMs.  Requires power supply with 3.3V output.
160
161config ALPHA_DP264
162	bool "DP264"
163	help
164	  Various 21264 systems with the tsunami core logic chipset.
165	  API Networks: 264DP, UP2000(+), CS20;
166	  Compaq: DS10(E,L), XP900, XP1000, DS20(E), ES40.
167
168config ALPHA_EB164
169	bool "EB164"
170	help
171	  EB164 21164 evaluation board from DEC.  Uses 21164 and ALCOR.  Has
172	  ISA and PCI expansion (3 ISA slots, 2 64-bit PCI slots (one is
173	  shared with an ISA slot) and 2 32-bit PCI slots.  Uses plus-in
174	  Bcache SIMMs. I/O sub-system provides SuperI/O (2S, 1P, FD), KBD,
175	  MOUSE (PS2 style), RTC/NVRAM.  Boot ROM is Flash.  PC-AT-sized
176	  motherboard.  Requires power supply with 3.3V output.
177
178config ALPHA_EB64P_CH
179	bool "EB64+"
180
181config ALPHA_EB66
182	bool "EB66"
183	help
184	  A Digital DS group board.  Uses 21066 or 21066A.  I/O sub-system is
185	  identical to EB64+.  Baby PC-AT size.  Runs from standard PC power
186	  supply.  The EB66 schematic was published as a marketing poster
187	  advertising the 21066 as "the first microprocessor in the world with
188	  embedded PCI".
189
190config ALPHA_EB66P
191	bool "EB66+"
192	help
193	  Later variant of the EB66 board.
194
195config ALPHA_EIGER
196	bool "Eiger"
197	help
198	  Apparently an obscure OEM single-board computer based on the
199	  Typhoon/Tsunami chipset family. Information on it is scanty.
200
201config ALPHA_JENSEN
202	bool "Jensen"
203	select HAVE_EISA
204	help
205	  DEC PC 150 AXP (aka Jensen): This is a very old Digital system - one
206	  of the first-generation Alpha systems. A number of these systems
207	  seem to be available on the second- hand market. The Jensen is a
208	  floor-standing tower system which originally used a 150MHz 21064 It
209	  used programmable logic to interface a 486 EISA I/O bridge to the
210	  CPU.
211
212config ALPHA_LX164
213	bool "LX164"
214	help
215	  A technical overview of this board is available at
216	  <http://www.unix-ag.org/Linux-Alpha/Architectures/LX164.html>.
217
218config ALPHA_LYNX
219	bool "Lynx"
220	select HAVE_EISA
221	help
222	  AlphaServer 2100A-based systems.
223
224config ALPHA_MARVEL
225	bool "Marvel"
226	help
227	  AlphaServer ES47 / ES80 / GS1280 based on EV7.
228
229config ALPHA_MIATA
230	bool "Miata"
231	select HAVE_EISA
232	help
233	  The Digital PersonalWorkStation (PWS 433a, 433au, 500a, 500au, 600a,
234	  or 600au).
235
236config ALPHA_MIKASA
237	bool "Mikasa"
238	help
239	  AlphaServer 1000-based Alpha systems.
240
241config ALPHA_NAUTILUS
242	bool "Nautilus"
243	help
244	  Alpha systems based on the AMD 751 & ALI 1543C chipsets.
245
246config ALPHA_NONAME_CH
247	bool "Noname"
248
249config ALPHA_NORITAKE
250	bool "Noritake"
251	select HAVE_EISA
252	help
253	  AlphaServer 1000A, AlphaServer 600A, and AlphaServer 800-based
254	  systems.
255
256config ALPHA_PC164
257	bool "PC164"
258
259config ALPHA_P2K
260	bool "Platform2000"
261
262config ALPHA_RAWHIDE
263	bool "Rawhide"
264	select HAVE_EISA
265	help
266	  AlphaServer 1200, AlphaServer 4000 and AlphaServer 4100 machines.
267	  See HOWTO at
268	  <http://www.alphalinux.org/docs/rawhide/4100_install.shtml>.
269
270config ALPHA_RUFFIAN
271	bool "Ruffian"
272	help
273	  Samsung APC164UX.  There is a page on known problems and workarounds
274	  at <http://www.alphalinux.org/faq/FAQ-11.html>.
275
276config ALPHA_RX164
277	bool "RX164"
278
279config ALPHA_SX164
280	bool "SX164"
281
282config ALPHA_SABLE
283	bool "Sable"
284	select HAVE_EISA
285	help
286	  Digital AlphaServer 2000 and 2100-based systems.
287
288config ALPHA_SHARK
289	bool "Shark"
290
291config ALPHA_TAKARA
292	bool "Takara"
293	help
294	  Alpha 11164-based OEM single-board computer.
295
296config ALPHA_TITAN
297	bool "Titan"
298	help
299	  AlphaServer ES45/DS25 SMP based on EV68 and Titan chipset.
300
301config ALPHA_WILDFIRE
302	bool "Wildfire"
303	help
304	  AlphaServer GS 40/80/160/320 SMP based on the EV67 core.
305
306endchoice
307
308# clear all implied options (don't want default values for those):
309# Most of these machines have ISA slots; not exactly sure which don't,
310# and this doesn't activate hordes of code, so do it always.
311config ISA
312	bool
313	default y
314	help
315	  Find out whether you have ISA slots on your motherboard.  ISA is the
316	  name of a bus system, i.e. the way the CPU talks to the other stuff
317	  inside your box.  Other bus systems are PCI, EISA, MicroChannel
318	  (MCA) or VESA.  ISA is an older system, now being displaced by PCI;
319	  newer boards don't support it.  If you have ISA, say Y, otherwise N.
320
321config ISA_DMA_API
322	bool
323	default y
324
325config ALPHA_NONAME
326	bool
327	depends on ALPHA_BOOK1 || ALPHA_NONAME_CH
328	default y
329	help
330	  The AXPpci33 (aka NoName), is based on the EB66 (includes the Multia
331	  UDB).  This design was produced by Digital's Technical OEM (TOEM)
332	  group. It uses the 21066 processor running at 166MHz or 233MHz. It
333	  is a baby-AT size, and runs from a standard PC power supply. It has
334	  5 ISA slots and 3 PCI slots (one pair are a shared slot). There are
335	  2 versions, with either PS/2 or large DIN connectors for the
336	  keyboard.
337
338config ALPHA_EV4
339	bool
340	depends on ALPHA_JENSEN || (ALPHA_SABLE && !ALPHA_GAMMA) || ALPHA_LYNX || ALPHA_NORITAKE && !ALPHA_PRIMO || ALPHA_MIKASA && !ALPHA_PRIMO || ALPHA_CABRIOLET || ALPHA_AVANTI_CH || ALPHA_EB64P_CH || ALPHA_XL || ALPHA_NONAME || ALPHA_EB66 || ALPHA_EB66P || ALPHA_P2K
341	default y if !ALPHA_LYNX
342	default y if !ALPHA_EV5
343
344config ALPHA_LCA
345	bool
346	depends on ALPHA_NONAME || ALPHA_EB66 || ALPHA_EB66P || ALPHA_P2K
347	default y
348
349config ALPHA_APECS
350	bool
351	depends on !ALPHA_PRIMO && (ALPHA_NORITAKE || ALPHA_MIKASA) || ALPHA_CABRIOLET || ALPHA_AVANTI_CH || ALPHA_EB64P_CH || ALPHA_XL
352	default y
353
354config ALPHA_EB64P
355	bool
356	depends on ALPHA_CABRIOLET || ALPHA_EB64P_CH
357	default y
358	help
359	  Uses 21064 or 21064A and APECs.  Has ISA and PCI expansion (3 ISA,
360	  2 PCI, one pair are on a shared slot). Supports 36-bit DRAM SIMs.
361	  ISA bus generated by Intel SaturnI/O PCI-ISA bridge. On-board SCSI
362	  (NCR 810 on PCI) Ethernet (Digital 21040), KBD, MOUSE (PS2 style),
363	  SuperI/O (2S, 1P, FD), RTC/NVRAM. Boot ROM is EPROM.  PC-AT size.
364	  Runs from standard PC power supply.
365
366config ALPHA_EV5
367	bool "EV5 CPU(s) (model 5/xxx)?" if ALPHA_LYNX
368	default y if ALPHA_RX164 || ALPHA_RAWHIDE || ALPHA_MIATA || ALPHA_LX164 || ALPHA_SX164 || ALPHA_RUFFIAN || ALPHA_SABLE && ALPHA_GAMMA || ALPHA_NORITAKE && ALPHA_PRIMO || ALPHA_MIKASA && ALPHA_PRIMO || ALPHA_PC164 || ALPHA_TAKARA || ALPHA_EB164 || ALPHA_ALCOR
369
370config ALPHA_CIA
371	bool
372	depends on ALPHA_MIATA || ALPHA_LX164 || ALPHA_SX164 || ALPHA_RUFFIAN || ALPHA_NORITAKE && ALPHA_PRIMO || ALPHA_MIKASA && ALPHA_PRIMO || ALPHA_PC164 || ALPHA_TAKARA || ALPHA_EB164 || ALPHA_ALCOR
373	default y
374
375config ALPHA_EV56
376	bool "EV56 CPU (speed >= 366MHz)?" if ALPHA_ALCOR
377	default y if ALPHA_RX164 || ALPHA_MIATA || ALPHA_LX164 || ALPHA_SX164 || ALPHA_RUFFIAN || ALPHA_PC164 || ALPHA_TAKARA
378
379config ALPHA_EV56
380	prompt "EV56 CPU (speed >= 333MHz)?"
381	depends on ALPHA_NORITAKE || ALPHA_PRIMO
382
383config ALPHA_EV56
384	prompt "EV56 CPU (speed >= 400MHz)?"
385	depends on ALPHA_RAWHIDE
386
387config ALPHA_PRIMO
388	bool "EV5 CPU daughtercard (model 5/xxx)?"
389	depends on ALPHA_NORITAKE || ALPHA_MIKASA
390	help
391	  Say Y if you have an AS 1000 5/xxx or an AS 1000A 5/xxx.
392
393config ALPHA_GAMMA
394	bool "EV5 CPU(s) (model 5/xxx)?" if ALPHA_SABLE
395	depends on ALPHA_SABLE || ALPHA_LYNX
396	default ALPHA_LYNX
397	help
398	  Say Y if you have an AS 2000 5/xxx or an AS 2100 5/xxx.
399
400config ALPHA_T2
401	bool
402	depends on ALPHA_SABLE || ALPHA_LYNX
403	default y
404
405config ALPHA_PYXIS
406	bool
407	depends on ALPHA_MIATA || ALPHA_LX164 || ALPHA_SX164 || ALPHA_RUFFIAN
408	default y
409
410config ALPHA_EV6
411	bool
412	depends on ALPHA_NAUTILUS || ALPHA_WILDFIRE || ALPHA_TITAN || ALPHA_SHARK || ALPHA_DP264 || ALPHA_EIGER || ALPHA_MARVEL
413	default y
414
415config ALPHA_TSUNAMI
416	bool
417	depends on ALPHA_SHARK || ALPHA_DP264 || ALPHA_EIGER
418	default y
419
420config ALPHA_EV67
421	bool "EV67 (or later) CPU (speed > 600MHz)?" if ALPHA_DP264 || ALPHA_EIGER
422	default y if ALPHA_NAUTILUS || ALPHA_WILDFIRE || ALPHA_TITAN || ALPHA_SHARK || ALPHA_MARVEL
423	help
424	  Is this a machine based on the EV67 core?  If in doubt, select N here
425	  and the machine will be treated as an EV6.
426
427config ALPHA_MCPCIA
428	bool
429	depends on ALPHA_RAWHIDE
430	default y
431
432config ALPHA_POLARIS
433	bool
434	depends on ALPHA_RX164
435	default y
436
437config ALPHA_IRONGATE
438	bool
439	depends on ALPHA_NAUTILUS
440	default y
441
442config GENERIC_HWEIGHT
443	bool
444	default y if !ALPHA_EV67
445
446config ALPHA_AVANTI
447	bool
448	depends on ALPHA_XL || ALPHA_AVANTI_CH
449	default y
450	help
451	  Avanti AS 200, AS 205, AS 250, AS 255, AS 300, and AS 400-based
452	  Alphas. Info at
453	  <http://www.unix-ag.org/Linux-Alpha/Architectures/Avanti.html>.
454
455config ALPHA_BROKEN_IRQ_MASK
456	bool
457	depends on ALPHA_GENERIC || ALPHA_PC164
458	default y
459
460config VGA_HOSE
461	bool
462	depends on VGA_CONSOLE && (ALPHA_GENERIC || ALPHA_TITAN || ALPHA_MARVEL || ALPHA_TSUNAMI)
463	default y
464	help
465	  Support VGA on an arbitrary hose; needed for several platforms
466	  which always have multiple hoses, and whose consoles support it.
467
468
469config ALPHA_QEMU
470	bool "Run under QEMU emulation"
471	depends on !ALPHA_GENERIC
472	help
473	  Assume the presence of special features supported by QEMU PALcode
474	  that reduce the overhead of system emulation.
475
476	  Generic kernels will auto-detect QEMU.  But when building a
477	  system-specific kernel, the assumption is that we want to
478	  eliminate as many runtime tests as possible.
479
480	  If unsure, say N.
481
482
483config ALPHA_SRM
484	bool "Use SRM as bootloader" if ALPHA_CABRIOLET || ALPHA_AVANTI_CH || ALPHA_EB64P || ALPHA_PC164 || ALPHA_TAKARA || ALPHA_EB164 || ALPHA_ALCOR || ALPHA_MIATA || ALPHA_LX164 || ALPHA_SX164 || ALPHA_NAUTILUS || ALPHA_NONAME
485	depends on TTY
486	default y if ALPHA_JENSEN || ALPHA_MIKASA || ALPHA_SABLE || ALPHA_LYNX || ALPHA_NORITAKE || ALPHA_DP264 || ALPHA_RAWHIDE || ALPHA_EIGER || ALPHA_WILDFIRE || ALPHA_TITAN || ALPHA_SHARK || ALPHA_MARVEL
487	help
488	  There are two different types of booting firmware on Alphas: SRM,
489	  which is command line driven, and ARC, which uses menus and arrow
490	  keys. Details about the Linux/Alpha booting process are contained in
491	  the Linux/Alpha FAQ, accessible on the WWW from
492	  <http://www.alphalinux.org/>.
493
494	  The usual way to load Linux on an Alpha machine is to use MILO
495	  (a bootloader that lets you pass command line parameters to the
496	  kernel just like lilo does for the x86 architecture) which can be
497	  loaded either from ARC or can be installed directly as a permanent
498	  firmware replacement from floppy (which requires changing a certain
499	  jumper on the motherboard). If you want to do either of these, say N
500	  here. If MILO doesn't work on your system (true for Jensen
501	  motherboards), you can bypass it altogether and boot Linux directly
502	  from an SRM console; say Y here in order to do that. Note that you
503	  won't be able to boot from an IDE disk using SRM.
504
505	  If unsure, say N.
506
507config ARCH_MAY_HAVE_PC_FDC
508	def_bool y
509
510config SMP
511	bool "Symmetric multi-processing support"
512	depends on ALPHA_SABLE || ALPHA_LYNX || ALPHA_RAWHIDE || ALPHA_DP264 || ALPHA_WILDFIRE || ALPHA_TITAN || ALPHA_GENERIC || ALPHA_SHARK || ALPHA_MARVEL
513	help
514	  This enables support for systems with more than one CPU. If you have
515	  a system with only one CPU, say N. If you have a system with more
516	  than one CPU, say Y.
517
518	  If you say N here, the kernel will run on uni- and multiprocessor
519	  machines, but will use only one CPU of a multiprocessor machine. If
520	  you say Y here, the kernel will run on many, but not all,
521	  uniprocessor machines. On a uniprocessor machine, the kernel
522	  will run faster if you say N here.
523
524	  See also the SMP-HOWTO available at
525	  <https://www.tldp.org/docs.html#howto>.
526
527	  If you don't know what to do here, say N.
528
529config NR_CPUS
530	int "Maximum number of CPUs (2-32)"
531	range 2 32
532	depends on SMP
533	default "32" if ALPHA_GENERIC || ALPHA_MARVEL
534	default "4" if !ALPHA_GENERIC && !ALPHA_MARVEL
535	help
536	  MARVEL support can handle a maximum of 32 CPUs, all the others
537	  with working support have a maximum of 4 CPUs.
538
539config ARCH_SPARSEMEM_ENABLE
540	bool "Sparse Memory Support"
541	help
542	  Say Y to support efficient handling of discontiguous physical memory,
543	  for systems that have huge holes in the physical address space.
544
545config ALPHA_WTINT
546	bool "Use WTINT" if ALPHA_SRM || ALPHA_GENERIC
547	default y if ALPHA_QEMU
548	default n if ALPHA_EV5 || ALPHA_EV56 || (ALPHA_EV4 && !ALPHA_LCA)
549	default n if !ALPHA_SRM && !ALPHA_GENERIC
550	default y if SMP
551	help
552	  The Wait for Interrupt (WTINT) PALcall attempts to place the CPU
553	  to sleep until the next interrupt.  This may reduce the power
554	  consumed, and the heat produced by the computer.  However, it has
555	  the side effect of making the cycle counter unreliable as a timing
556	  device across the sleep.
557
558	  For emulation under QEMU, definitely say Y here, as we have other
559	  mechanisms for measuring time than the cycle counter.
560
561	  For EV4 (but not LCA), EV5 and EV56 systems, or for systems running
562	  MILO, sleep mode is not supported so you might as well say N here.
563
564	  For SMP systems we cannot use the cycle counter for timing anyway,
565	  so you might as well say Y here.
566
567	  If unsure, say N.
568
569# LARGE_VMALLOC is racy, if you *really* need it then fix it first
570config ALPHA_LARGE_VMALLOC
571	bool
572	help
573	  Process creation and other aspects of virtual memory management can
574	  be streamlined if we restrict the kernel to one PGD for all vmalloc
575	  allocations.  This equates to about 8GB.
576
577	  Under normal circumstances, this is so far and above what is needed
578	  as to be laughable.  However, there are certain applications (such
579	  as benchmark-grade in-kernel web serving) that can make use of as
580	  much vmalloc space as is available.
581
582	  Say N unless you know you need gobs and gobs of vmalloc space.
583
584config VERBOSE_MCHECK
585	bool "Verbose Machine Checks"
586
587config VERBOSE_MCHECK_ON
588	int "Verbose Printing Mode (0=off, 1=on, 2=all)"
589	depends on VERBOSE_MCHECK
590	default 1
591	help
592	  This option allows the default printing mode to be set, and then
593	  possibly overridden by a boot command argument.
594
595	  For example, if one wanted the option of printing verbose
596	  machine checks, but wanted the default to be as if verbose
597	  machine check printing was turned off, then one would choose
598	  the printing mode to be 0. Then, upon reboot, one could add
599	  the boot command line "verbose_mcheck=1" to get the normal
600	  verbose machine check printing, or "verbose_mcheck=2" to get
601	  the maximum information available.
602
603	  Take the default (1) unless you want more control or more info.
604
605choice
606	prompt "Timer interrupt frequency (HZ)?"
607	default HZ_128 if ALPHA_QEMU
608	default HZ_1200 if ALPHA_RAWHIDE
609	default HZ_1024
610	help
611	  The frequency at which timer interrupts occur.  A high frequency
612	  minimizes latency, whereas a low frequency minimizes overhead of
613	  process accounting.  The later effect is especially significant
614	  when being run under QEMU.
615
616	  Note that some Alpha hardware cannot change the interrupt frequency
617	  of the timer.  If unsure, say 1024 (or 1200 for Rawhide).
618
619	config HZ_32
620		bool "32 Hz"
621	config HZ_64
622		bool "64 Hz"
623	config HZ_128
624		bool "128 Hz"
625	config HZ_256
626		bool "256 Hz"
627	config HZ_1024
628		bool "1024 Hz"
629	config HZ_1200
630		bool "1200 Hz"
631endchoice
632
633config HZ
634	int
635	default 32 if HZ_32
636	default 64 if HZ_64
637	default 128 if HZ_128
638	default 256 if HZ_256
639	default 1200 if HZ_1200
640	default 1024
641
642config SRM_ENV
643	tristate "SRM environment through procfs"
644	depends on PROC_FS
645	help
646	  If you enable this option, a subdirectory inside /proc called
647	  /proc/srm_environment will give you access to the all important
648	  SRM environment variables (those which have a name) and also
649	  to all others (by their internal number).
650
651	  SRM is something like a BIOS for Alpha machines. There are some
652	  other such BIOSes, like AlphaBIOS, which this driver cannot
653	  support (hey, that's not SRM!).
654
655	  Despite the fact that this driver doesn't work on all Alphas (but
656	  only on those which have SRM as their firmware), it's save to
657	  build it even if your particular machine doesn't know about SRM
658	  (or if you intend to compile a generic kernel). It will simply
659	  not create those subdirectory in /proc (and give you some warning,
660	  of course).
661
662	  This driver is also available as a module and will be called
663	  srm_env then.
664
665endmenu
666
667# DUMMY_CONSOLE may be defined in drivers/video/console/Kconfig
668# but we also need it if VGA_HOSE is set
669config DUMMY_CONSOLE
670	bool
671	depends on VGA_HOSE
672	default y
673