1==================== 2Kernel driver ds2482 3==================== 4 5Supported chips: 6 7 * Maxim DS2482-100, Maxim DS2482-800 8 9 Prefix: 'ds2482' 10 11 Addresses scanned: None 12 13 Datasheets: 14 15 - http://datasheets.maxim-ic.com/en/ds/DS2482-100.pdf 16 - http://datasheets.maxim-ic.com/en/ds/DS2482-800.pdf 17 18Author: Ben Gardner <bgardner@wabtec.com> 19 20 21Description 22----------- 23 24The Maxim/Dallas Semiconductor DS2482 is a I2C device that provides 25one (DS2482-100) or eight (DS2482-800) 1-wire busses. 26 27 28General Remarks 29--------------- 30 31Valid addresses are 0x18, 0x19, 0x1a, and 0x1b. 32 33However, the device cannot be detected without writing to the i2c bus, so no 34detection is done. You should instantiate the device explicitly. 35 36:: 37 38 $ modprobe ds2482 39 $ echo ds2482 0x18 > /sys/bus/i2c/devices/i2c-0/new_device 40