xref: /linux/Documentation/usb/iuu_phoenix.rst (revision 26fbb4c8c7c3ee9a4c3b4de555a8587b5a19154e)
1=============================
2Infinity Usb Unlimited Readme
3=============================
4
5Hi all,
6
7
8This module provide a serial interface to use your
9IUU unit in phoenix mode. Loading this module will
10bring a ttyUSB[0-x] interface. This driver must be
11used by your favorite application to pilot the IUU
12
13This driver is still in beta stage, so bugs can
14occur and your system may freeze. As far I now,
15I never had any problem with it, but I'm not a real
16guru, so don't blame me if your system is unstable
17
18You can plug more than one IUU. Every unit will
19have his own device file(/dev/ttyUSB0,/dev/ttyUSB1,...)
20
21
22
23How to tune the reader speed?
24=============================
25
26 A few parameters can be used at load time
27 To use parameters, just unload the module if it is
28 already loaded and use modprobe iuu_phoenix param=value.
29 In case of prebuilt module, use the command
30 insmod iuu_phoenix param=value.
31
32 Example::
33
34	modprobe iuu_phoenix clockmode=3
35
36 The parameters are:
37
38clockmode:
39	1=3Mhz579,2=3Mhz680,3=6Mhz (int)
40boost:
41	overclock boost percent 100 to 500 (int)
42cdmode:
43	Card detect mode
44	0=none, 1=CD, 2=!CD, 3=DSR, 4=!DSR, 5=CTS, 6=!CTS, 7=RING, 8=!RING (int)
45xmas:
46	xmas color enabled or not (bool)
47debug:
48	Debug enabled or not (bool)
49
50-  clockmode will provide 3 different base settings commonly adopted by
51   different software:
52
53	1. 3Mhz579
54	2. 3Mhz680
55	3. 6Mhz
56
57-  boost provide a way to overclock the reader ( my favorite :-)  )
58   For example to have best performance than a simple clockmode=3, try this::
59
60      modprobe boost=195
61
62   This will put the reader in a base of 3Mhz579 but boosted a 195 % !
63   the real clock will be now : 6979050 Hz ( 6Mhz979 ) and will increase
64   the speed to a score 10 to 20% better than the simple clockmode=3 !!!
65
66
67-  cdmode permit to setup the signal used to inform the userland ( ioctl answer )
68   if the card is present or not. Eight signals are possible.
69
70-  xmas is completely useless except for your eyes. This is one of my friend who was
71   so sad to have a nice device like the iuu without seeing all color range available.
72   So I have added this option to permit him to see a lot of color ( each activity change the color
73   and the frequency randomly )
74
75-  debug will produce a lot of debugging messages...
76
77
78Last notes
79==========
80
81 Don't worry about the serial settings, the serial emulation
82 is an abstraction, so use any speed or parity setting will
83 work. ( This will not change anything ).Later I will perhaps
84 use this settings to deduce de boost but is that feature
85 really necessary ?
86 The autodetect feature used is the serial CD. If that doesn't
87 work for your software, disable detection mechanism in it.
88
89
90 Have fun !
91
92 Alain Degreffe
93
94 eczema(at)ecze.com
95