1============== 2Audio Clocking 3============== 4 5This text describes the audio clocking terms in ASoC and digital audio in 6general. Note: Audio clocking can be complex! 7 8 9Master Clock 10------------ 11 12Every audio subsystem is driven by a master clock (sometimes referred to as MCLK 13or SYSCLK). This audio master clock can be derived from a number of sources 14(e.g. crystal, PLL, CPU clock) and is responsible for producing the correct 15audio playback and capture sample rates. 16 17Some master clocks (e.g. PLLs and CPU based clocks) are configurable in that 18their speed can be altered by software (depending on the system use and to save 19power). Other master clocks are fixed at a set frequency (i.e. crystals). 20 21 22DAI Clocks 23---------- 24The Digital Audio Interface is usually driven by a Bit Clock (often referred to 25as BCLK). This clock is used to drive the digital audio data across the link 26between the codec and CPU. 27 28The DAI also has a frame clock to signal the start of each audio frame. This 29clock is sometimes referred to as LRC (left right clock) or FRAME. This clock 30runs at exactly the sample rate (LRC = Rate). 31 32Bit Clock can be generated as follows:- 33 34- BCLK = MCLK / x, or 35- BCLK = LRC * x, or 36- BCLK = LRC * Channels * Word Size 37 38This relationship depends on the codec or SoC CPU in particular. In general 39it is best to configure BCLK to the lowest possible speed (depending on your 40rate, number of channels and word size) to save on power. 41 42It is also desirable to use the codec (if possible) to drive (or master) the 43audio clocks as it usually gives more accurate sample rates than the CPU. 44 45 46 47