1Release Date : Thu. Jun 19, 2014 17:00:00 PST 2014 - 2 (emaild-id:megaraidlinux@lsi.com) 3 Adam Radford 4 Kashyap Desai 5 Sumit Saxena 6 Uday Lingala 7Current Version : 06.803.02.00-rc1 8Old Version : 06.803.01.00-rc1 9 1. Fix reset_mutex leak in megasas_reset_fusion(). 10 2. Remove unused variables in megasas_instance. 11 3. Fix LD/VF affiliation parsing. 12 4. Add missing initial call to megasas_get_ld_vf_affiliation(). 13 5. Version and Changelog update. 14------------------------------------------------------------------------------- 15Release Date : Mon. Mar 10, 2014 17:00:00 PST 2014 - 16 (emaild-id:megaraidlinux@lsi.com) 17 Adam Radford 18 Kashyap Desai 19 Sumit Saxena 20Current Version : 06.803.01.00-rc1 21Old Version : 06.700.06.00-rc1 22 1. Load correct raid context timeout value for multipathing & clustering. 23 2. Fix megasas_ioc_init_fusion to use local stack variable. 24 3. Return leaked MPT frames to MPT command pool. 25 4. Add Dell PowerEdge VRTX SR-IOV VF device support. 26 5. Version and Changelog update. 27------------------------------------------------------------------------------- 28Release Date : Sat. Aug 31, 2013 17:00:00 PST 2013 - 29 (emaild-id:megaraidlinux@lsi.com) 30 Adam Radford 31 Kashyap Desai 32 Sumit Saxena 33Current Version : 06.700.06.00-rc1 34Old Version : 06.600.18.00-rc1 35 1. Add High Availability clustering support using shared Logical Disks. 36 2. Version and Changelog update. 37------------------------------------------------------------------------------- 38Release Date : Wed. May 15, 2013 17:00:00 PST 2013 - 39 (emaild-id:megaraidlinux@lsi.com) 40 Adam Radford 41 Kashyap Desai 42 Sumit Saxena 43Current Version : 06.600.18.00-rc1 44Old Version : 06.506.00.00-rc1 45 1. Return DID_ERROR for scsi io, when controller is in critical h/w error. 46 2. Fix the interrupt mask for Gen2 controller. 47 3. Update balance count in driver to be in sync of firmware. 48 4. Free event detail memory without device ID check. 49 5. Set IO request timeout value provided by OS timeout for Tape devices. 50 6. Add support for MegaRAID Fury (device ID-0x005f) 12Gb/s controllers. 51 7. Add support to display Customer branding details in syslog. 52 8. Set IoFlags to enable Fast Path for JBODs for Invader/Fury(12 Gb/s) 53 controllers. 54 9. Add support for Extended MSI-x vectors for Invader and Fury(12Gb/s 55 HBA). 56 10.Add support for Uneven Span PRL11. 57 11.Add support to differentiate between iMR and MR Firmware. 58 12.Version and Changelog update. 59------------------------------------------------------------------------------- 60Release Date : Sat. Feb 9, 2013 17:00:00 PST 2013 - 61 (emaild-id:megaraidlinux@lsi.com) 62 Adam Radford 63Current Version : 06.506.00.00-rc1 64Old Version : 06.504.01.00-rc1 65 1. Add 4k FastPath DIF support. 66 2. Don't load DevHandle unless FastPath enabled. 67 3. Version and Changelog update. 68------------------------------------------------------------------------------- 69Release Date : Mon. Oct 1, 2012 17:00:00 PST 2012 - 70 (emaild-id:megaraidlinux@lsi.com) 71 Adam Radford 72Current Version : 06.504.01.00-rc1 73Old Version : 00.00.06.18-rc1 74 1. Removed un-needed completion_lock spinlock calls. 75 2. Add module param for configurable MSI-X vector count. 76 3. Load io_request DataLength in bytes. 77 4. Add array boundary check for SystemPD. 78 5. Add SystemPD FastPath support. 79 6. Remove duplicate code. 80 7. Version, Changelog, Copyright update. 81------------------------------------------------------------------------------- 82Release Date : Tue. Jun 17, 2012 17:00:00 PST 2012 - 83 (emaild-id:megaraidlinux@lsi.com) 84 Adam Radford/Kashyap Desai 85Current Version : 00.00.06.18-rc1 86Old Version : 00.00.06.15-rc1 87 1. Fix Copyright dates. 88 2. Add throttlequeuedepth module parameter. 89 3. Add resetwaittime module parameter. 90 4. Move poll_aen_lock initializer. 91------------------------------------------------------------------------------- 92Release Date : Mon. Mar 19, 2012 17:00:00 PST 2012 - 93 (emaild-id:megaraidlinux@lsi.com) 94 Adam Radford 95Current Version : 00.00.06.15-rc1 96Old Version : 00.00.06.14-rc1 97 1. Optimize HostMSIxVectors setting. 98 2. Add fpRead/WriteCapable, fpRead/WriteAcrossStripe checks. 99------------------------------------------------------------------------------- 100Release Date : Fri. Jan 6, 2012 17:00:00 PST 2010 - 101 (emaild-id:megaraidlinux@lsi.com) 102 Adam Radford 103Current Version : 00.00.06.14-rc1 104Old Version : 00.00.06.12-rc1 105 1. Fix reglockFlags for degraded raid5/6 for MR 9360/9380. 106 2. Mask off flags in ioctl path to prevent memory scribble with older 107 MegaCLI versions. 108 3. Remove poll_mode_io module parameter, sysfs node, and associated code. 109------------------------------------------------------------------------------- 110Release Date : Wed. Oct 5, 2011 17:00:00 PST 2010 - 111 (emaild-id:megaraidlinux@lsi.com) 112 Adam Radford 113Current Version : 00.00.06.12-rc1 114Old Version : 00.00.05.40-rc1 115 1. Continue booting immediately if FW in FAULT at driver load time. 116 2. Increase default cmds per lun to 256. 117 3. Fix mismatch in megasas_reset_fusion() mutex lock-unlock. 118 4. Remove some un-necessary code. 119 5. Clear state change interrupts for Fusion/Invader. 120 6. Clear FUSION_IN_RESET before enabling interrupts. 121 7. Add support for MegaRAID 9360/9380 12GB/s controllers. 122 8. Add multiple MSI-X vector/multiple reply queue support. 123 9. Add driver workaround for PERC5/1068 kdump kernel panic. 124------------------------------------------------------------------------------- 125Release Date : Tue. Jul 26, 2011 17:00:00 PST 2010 - 126 (emaild-id:megaraidlinux@lsi.com) 127 Adam Radford 128Current Version : 00.00.05.40-rc1 129Old Version : 00.00.05.38-rc1 130 1. Fix FastPath I/O to work with degraded RAID 1. 131 2. Add .change_queue_depth support. 132------------------------------------------------------------------------------- 133Release Date : Wed. May 11, 2011 17:00:00 PST 2010 - 134 (emaild-id:megaraidlinux@lsi.com) 135 Adam Radford 136Current Version : 00.00.05.38-rc1 137Old Version : 00.00.05.34-rc1 138 1. Remove MSI-X black list, use MFI_REG_STATE.ready.msiEnable. 139 2. Remove un-used function megasas_return_cmd_for_smid(). 140 3. Check MFI_REG_STATE.fault.resetAdapter in megasas_reset_fusion(). 141 4. Disable interrupts/free_irq() in megasas_shutdown(). 142 5. Fix bug where AENs could be lost in probe() and resume(). 143 6. Convert 6,10,12 byte CDB's to 16 byte CDB for large LBA's for FastPath 144 IO. 145 7. Add 1078 OCR support. 146------------------------------------------------------------------------------- 147Release Date : Thu. Feb 24, 2011 17:00:00 PST 2010 - 148 (emaild-id:megaraidlinux@lsi.com) 149 Adam Radford 150Current Version : 00.00.05.34-rc1 151Old Version : 00.00.05.29-rc1 152 1. Fix some failure gotos from megasas_probe_one(), etc. 153 2. Add missing check_and_restore_queue_depth() call in 154 complete_cmd_fusion(). 155 3. Enable MSI-X before calling megasas_init_fw(). 156 4. Call tasklet_schedule() even if outbound_intr_status == 0 for MFI based 157 boards in MSI-X mode. 158 5. Fix megasas_probe_one() to clear PCI_MSIX_FLAGS_ENABLE in msi control 159 register in kdump kernel. 160 6. Fix megasas_get_cmd() to only print "Command pool empty" if 161 megasas_dbg_lvl is set. 162 7. Fix megasas_build_dcdb_fusion() to not filter by TYPE_DISK. 163 8. Fix megasas_build_dcdb_fusion() to use io_request->LUN[1] field. 164 9. Add MR_EVT_CFG_CLEARED to megasas_aen_polling(). 165 10. Fix tasklet_init() in megasas_init_fw() to use instancet->tasklet. 166 11. Fix fault state handling in megasas_transition_to_ready(). 167 12. Fix max_sectors setting for IEEE SGL's. 168 13. Fix iMR OCR support to work correctly. 169------------------------------------------------------------------------------- 170Release Date : Tues. Dec 14, 2010 17:00:00 PST 2010 - 171 (emaild-id:megaraidlinux@lsi.com) 172 Adam Radford 173Current Version : 00.00.05.29-rc1 174Old Version : 00.00.04.31-rc1 175 1. Rename megaraid_sas.c to megaraid_sas_base.c. 176 2. Update GPL headers. 177 3. Add MSI-X support and 'msix_disable' module parameter. 178 4. Use lowest memory bar (for SR-IOV VF support). 179 5. Add struct megasas_instance_temlate changes, and change all code to use 180 new instance entries: 181 182 irqreturn_t (*service_isr )(int irq, void *devp); 183 void (*tasklet)(unsigned long); 184 u32 (*init_adapter)(struct megasas_instance *); 185 u32 (*build_and_issue_cmd) (struct megasas_instance *, 186 struct scsi_cmnd *); 187 void (*issue_dcmd) (struct megasas_instance *instance, 188 struct megasas_cmd *cmd); 189 190 6. Add code to support MegaRAID 9265/9285 controllers device id (0x5b). 191------------------------------------------------------------------------------- 1921 Release Date : Thur. May 03, 2010 09:12:45 PST 2009 - 193 (emaild-id:megaraidlinux@lsi.com) 194 Bo Yang 195 1962 Current Version : 00.00.04.31-rc1 1973 Older Version : 00.00.04.17.1-rc1 198 1991. Add the Online Controller Reset (OCR) to the Driver. 200 OCR is the new feature for megaraid_sas driver which 201 will allow the fw to do the chip reset which will not 202 affect the OS behavior. 203 204 To add the OCR support, driver need to do: 205 a). reset the controller chips -- Xscale and Gen2 which 206 will change the function calls and add the reset function 207 related to this two chips. 208 209 b). during the reset, driver will store the pending cmds 210 which not returned by FW to driver's pending queue. Driver 211 will re-issue those pending cmds again to FW after the OCR 212 finished. 213 214 c). In driver's timeout routine, driver will report to 215 OS as reset. Also driver's queue routine will block the 216 cmds until the OCR finished. 217 218 d). in Driver's ISR routine, if driver get the FW state as 219 state change, FW in Failure status and FW support online controller 220 reset (OCR), driver will start to do the controller reset. 221 222 e). In driver's IOCTL routine, the application cmds will wait for the 223 OCR to finish, then issue the cmds to FW. 224 225 f). Before driver kill adapter, driver will do last chance of 226 OCR to see if driver can bring back the FW. 227 2282. Add the support update flag to the driver to tell LSI megaraid_sas 229 application which driver will support the device update. So application 230 will not need to do the device update after application add/del the device 231 from the system. 2323. In driver's timeout routine, driver will do three time reset if fw is in 233 failed state. Driver will kill adapter if can't bring back FW after the 234 this three times reset. 2354. Add the input parameter max_sectors to 1MB support to our GEN2 controller. 236 customer can use the input parameter max_sectors to add 1MB support to GEN2 237 controller. 238 2391 Release Date : Thur. Oct 29, 2009 09:12:45 PST 2009 - 240 (emaild-id:megaraidlinux@lsi.com) 241 Bo Yang 242 2432 Current Version : 00.00.04.17.1-rc1 2443 Older Version : 00.00.04.12 245 2461. Add the pad_0 in mfi frame structure to 0 to fix the 247 context value larger than 32bit value issue. 248 2492. Add the logic drive list to the driver. Driver will 250 keep the logic drive list internal after driver load. 251 2523. driver fixed the device update issue after get the AEN 253 PD delete/ADD, LD add/delete from FW. 254 2551 Release Date : Tues. July 28, 2009 10:12:45 PST 2009 - 256 (emaild-id:megaraidlinux@lsi.com) 257 Bo Yang 258 2592 Current Version : 00.00.04.12 2603 Older Version : 00.00.04.10 261 2621. Change the AEN sys PD update from scsi_scan to 263 scsi_add_device and scsi_remove_device. 2642. Takeoff the debug print-out in aen_polling routine. 265 2661 Release Date : Thur. July 02, 2009 10:12:45 PST 2009 - 267 (emaild-id:megaraidlinux@lsi.com) 268 Bo Yang 269 2702 Current Version : 00.00.04.10 2713 Older Version : 00.00.04.08 272 2731. Add the 3 mins timeout during the controller initialize. 2742. Add the fix for 64bit sense date errors. 275 2761 Release Date : Tues. May 05, 2009 10:12:45 PST 2009 - 277 (emaild-id:megaraidlinux@lsi.com) 278 Bo Yang 279 2802 Current Version : 00.00.04.08 2813 Older Version : 00.00.04.06 282 2831. Add the fix of pending in FW after deleted the logic drives. 2842. Add the fix of deallocating memory after get pdlist. 285 2861 Release Date : Tues. March 26, 2009 10:12:45 PST 2009 - 287 (emaild-id:megaraidlinux@lsi.com) 288 Bo Yang 289 2902 Current Version : 00.00.04.06 2913 Older Version : 00.00.04.04 292 2931. Add the fix of the driver cmd empty fix of the driver cmd empty. 2942. Add the fix of the driver MSM AEN CMD cause the system slow. 295 2961 Release Date : Tues. March 03, 2009 10:12:45 PST 2009 - 297 (emaild-id:megaraidlinux@lsi.com) 298 Bo Yang 299 3002 Current Version : 00.00.04.04 3013 Older Version : 00.00.04.01 302 3031. Add the Tape drive fix to the driver: If the command is for 304 the tape device, set the pthru timeout to the os layer timeout value. 305 3062. Add Poll_wait mechanism to Gen-2 Linux driv. 307 In the aen handler, driver needs to wakeup poll handler similar to 308 the way it raises SIGIO. 309 3103. Add new controller new SAS2 support to the driver. 311 3124. Report the unconfigured PD (system PD) to OS. 313 3145. Add the IEEE SGL support to the driver 315 3166. Reasign the Application cmds to SAS2 controller 317 3181 Release Date : Thur.July. 24 11:41:51 PST 2008 - 319 (emaild-id:megaraidlinux@lsi.com) 320 Sumant Patro 321 Bo Yang 322 3232 Current Version : 00.00.04.01 3243 Older Version : 00.00.03.22 325 3261. Add the new controller (0078, 0079) support to the driver 327 Those controllers are LSI's next generatation(gen2) SAS controllers. 328 3291 Release Date : Mon.June. 23 10:12:45 PST 2008 - 330 (emaild-id:megaraidlinux@lsi.com) 331 Sumant Patro 332 Bo Yang 333 3342 Current Version : 00.00.03.22 3353 Older Version : 00.00.03.20 336 3371. Add shutdown DCMD cmd to the shutdown routine to make FW shutdown proper. 3382. Unexpected interrupt occurs in HWR Linux driver, add the dumy readl pci flush will fix this issue. 339 3401 Release Date : Mon. March 10 11:02:31 PDT 2008 - 341 (emaild-id:megaraidlinux@lsi.com) 342 Sumant Patro 343 Bo Yang 344 3452 Current Version : 00.00.03.20-RC1 3463 Older Version : 00.00.03.16 347 3481. Rollback the sense info implementation 349 Sense buffer ptr data type in the ioctl path is reverted back 350 to u32 * as in previous versions of driver. 351 3522. Fixed the driver frame count. 353 When Driver sent wrong frame count to firmware. As this 354 particular command is sent to drive, FW is seeing continuous 355 chip resets and so the command will timeout. 356 3573. Add the new controller(1078DE) support to the driver 358 and Increase the max_wait to 60 from 10 in the controller 359 operational status. With this max_wait increase, driver will 360 make sure the FW will finish the pending cmd for KDUMP case. 361 3621 Release Date : Thur. Nov. 07 16:30:43 PST 2007 - 363 (emaild-id:megaraidlinux@lsi.com) 364 Sumant Patro 365 Bo Yang 366 3672 Current Version : 00.00.03.16 3683 Older Version : 00.00.03.15 369 3701. Increased MFI_POLL_TIMEOUT_SECS to 60 seconds from 10. FW may take 371 a max of 60 seconds to respond to the INIT cmd. 372 3731 Release Date : Fri. Sep. 07 16:30:43 PST 2007 - 374 (emaild-id:megaraidlinux@lsi.com) 375 Sumant Patro 376 Bo Yang 377 3782 Current Version : 00.00.03.15 3793 Older Version : 00.00.03.14 380 3811. Added module parameter "poll_mode_io" to support for "polling" 382 (reduced interrupt operation). In this mode, IO completion 383 interrupts are delayed. At the end of initiating IOs, the 384 driver schedules for cmd completion if there are pending cmds 385 to be completed. A timer-based interrupt has also been added 386 to prevent IO completion processing from being delayed 387 indefinitely in the case that no new IOs are initiated. 388 3891 Release Date : Fri. Sep. 07 16:30:43 PST 2007 - 390 (emaild-id:megaraidlinux@lsi.com) 391 Sumant Patro 392 Bo Yang 393 3942 Current Version : 00.00.03.14 3953 Older Version : 00.00.03.13 396 3971. Setting the max_sectors_per_req based on max SGL supported by the 398 FW. Prior versions calculated this value from controller info 399 (max_sectors_1, max_sectors_2). For certain controllers/FW, 400 this was resulting in a value greater than max SGL supported 401 by the FW. Issue was first reported by users running LUKS+XFS 402 with megaraid_sas. Thanks to RB for providing the logs and 403 duplication steps that helped to get to the root cause of the 404 issue. 2. Increased MFI_POLL_TIMEOUT_SECS to 60 seconds from 405 10. FW may take a max of 60 seconds to respond to the INIT 406 cmd. 407 4081 Release Date : Fri. June. 15 16:30:43 PST 2007 - 409 (emaild-id:megaraidlinux@lsi.com) 410 Sumant Patro 411 Bo Yang 412 4132 Current Version : 00.00.03.13 4143 Older Version : 00.00.03.12 415 4161. Added the megasas_reset_timer routine to intercept cmd timeout and throttle io. 417 418On Fri, 2007-03-16 at 16:44 -0600, James Bottomley wrote: 419It looks like megaraid_sas at least needs this to throttle its commands 420> as they begin to time out. The code keeps the existing transport 421> template use of eh_timed_out (and allows the transport to override the 422> host if they both have this callback). 423> 424> James 425 4261 Release Date : Sat May. 12 16:30:43 PST 2007 - 427 (emaild-id:megaraidlinux@lsi.com) 428 Sumant Patro 429 Bo Yang 430 4312 Current Version : 00.00.03.12 4323 Older Version : 00.00.03.11 433 4341. When MegaSAS driver receives reset call from OS, driver waits in reset 435routine for max 3 minutes for all pending command completion. Now driver will 436call completion routine every 5 seconds from the reset routine instead of 437waiting for depending on cmd completion from isr path. 438 4391 Release Date : Mon Apr. 30 10:25:52 PST 2007 - 440 (emaild-id:megaraidlinux@lsi.com) 441 Sumant Patro 442 Bo Yang 443 4442 Current Version : 00.00.03.11 4453 Older Version : 00.00.03.09 446 447 1. Memory Manager for IOCTL removed for 2.6 kernels. 448 pci_alloc_consistent replaced by dma_alloc_coherent. With this 449 change there is no need of memory manager in the driver code 450 451 On Wed, 2007-02-07 at 13:30 -0800, Andrew Morton wrote: 452 > I suspect all this horror is due to stupidity in the DMA API. 453 > 454 > pci_alloc_consistent() just goes and assumes GFP_ATOMIC, whereas 455 > the caller (megasas_mgmt_fw_ioctl) would have been perfectly happy 456 > to use GFP_KERNEL. 457 > 458 > I bet this fixes it 459 460 It does, but the DMA API was expanded to cope with this exact case, so 461 use dma_alloc_coherent() directly in the megaraid code instead. The dev 462 is just &pci_dev->dev. 463 464 James <James.Bottomley@SteelEye.com> 465 466 3. SYNCHRONIZE_CACHE is not supported by FW and thus blocked by driver. 467 4. Hibernation support added 468 5. Performing diskdump while running IO in RHEL 4 was failing. Fixed. 469 4701 Release Date : Fri Feb. 09 14:36:28 PST 2007 - 471 (emaild-id:megaraidlinux@lsi.com) 472 Sumant Patro 473 Bo Yang 474 4752 Current Version : 00.00.03.09 4763 Older Version : 00.00.03.08 477 478i. Under heavy IO mid-layer prints "DRIVER_TIMEOUT" errors 479 480 The driver now waits for 10 seconds to elapse instead of 5 (as in 481 previous release) to resume IO. 482 4831 Release Date : Mon Feb. 05 11:35:24 PST 2007 - 484 (emaild-id:megaraidlinux@lsi.com) 485 Sumant Patro 486 Bo Yang 4872 Current Version : 00.00.03.08 4883 Older Version : 00.00.03.07 489 490i. Under heavy IO mid-layer prints "DRIVER_TIMEOUT" errors 491 492 Fix: The driver is now throttling IO. 493 Checks added in megasas_queue_command to know if FW is able to 494 process commands within timeout period. If number of retries 495 is 2 or greater,the driver stops sending cmd to FW temporarily. IO is 496 resumed if pending cmd count reduces to 16 or 5 seconds has elapsed 497 from the time cmds were last sent to FW. 498 499ii. FW enables WCE bit in Mode Sense cmd for drives that are configured 500 as WriteBack. The OS may send "SYNCHRONIZE_CACHE" cmd when Logical 501 Disks are exposed with WCE=1. User is advised to enable Write Back 502 mode only when the controller has battery backup. At this time 503 Synhronize cache is not supported by the FW. Driver will short-cycle 504 the cmd and return success without sending down to FW. 505 5061 Release Date : Sun Jan. 14 11:21:32 PDT 2007 - 507 Sumant Patro <Sumant.Patro@lsil.com>/Bo Yang 5082 Current Version : 00.00.03.07 5093 Older Version : 00.00.03.06 510 511i. bios_param entry added in scsi_host_template that returns disk geometry 512 information. 513 5141 Release Date : Fri Oct 20 11:21:32 PDT 2006 - Sumant Patro <Sumant.Patro@lsil.com>/Bo Yang 5152 Current Version : 00.00.03.06 5163 Older Version : 00.00.03.05 517 5181. Added new memory management module to support the IOCTL memory allocation. For IOCTL we try to allocate from the memory pool created during driver initialization. If mem pool is empty then we allocate at run time. 5192. Added check in megasas_queue_command and dpc/isr routine to see if we have already declared adapter dead 520 (hw_crit_error=1). If hw_crit_error==1, now we donot accept any processing of pending cmds/accept any cmd from OS 521 5221 Release Date : Mon Oct 02 11:21:32 PDT 2006 - Sumant Patro <Sumant.Patro@lsil.com> 5232 Current Version : 00.00.03.05 5243 Older Version : 00.00.03.04 525 526i. PCI_DEVICE macro used 527 528 Convert the pci_device_id-table of the megaraid_sas-driver to the PCI_DEVICE-macro, to safe some lines. 529 530 - Henrik Kretzschmar <henne@nachtwindheim.de> 531ii. All compiler warnings removed 532iii. megasas_ctrl_info struct reverted to 3.02 release 533iv. Default value of megasas_dbg_lvl set to 0 534v. Removing in megasas_exit the sysfs entry created for megasas_dbg_lvl 535vi. In megasas_teardown_frame_pool(), cmd->frame was passed instead of 536 cmd->sense to pci_pool_free. Fixed. Bug was pointed out by 537 Eric Sesterhenn 538 5391 Release Date : Wed Sep 13 14:22:51 PDT 2006 - Sumant Patro <Sumant.Patro@lsil.com> 5402 Current Version : 00.00.03.04 5413 Older Version : 00.00.03.03 542 543i. Added Reboot notify 544ii. Reduced by 1 max cmds sent to FW from Driver to make the reply_q_sz same 545 as Max Cmds FW can support 546 5471 Release Date : Tue Aug 22 16:33:14 PDT 2006 - Sumant Patro <Sumant.Patro@lsil.com> 5482 Current Version : 00.00.03.03 5493 Older Version : 00.00.03.02 550 551i. Send stop adapter to FW & Dump pending FW cmds before declaring adapter dead. 552 New variable added to set dbg level. 553ii. Disable interrupt made as fn pointer as they are different for 1068 / 1078 554iii. Frame count optimization. Main frame can contain 2 SGE for 64 bit SGLs and 555 3 SGE for 32 bit SGL 556iv. Tasklet added for cmd completion 557v. If FW in operational state before firing INIT, now we send RESET Flag to FW instead of just READY. This is used to do soft reset. 558vi. megasas_ctrl_prop structure updated (based on FW struct) 559vii. Added print : FW now in Ready State during initialization 560 5611 Release Date : Sun Aug 06 22:49:52 PDT 2006 - Sumant Patro <Sumant.Patro@lsil.com> 5622 Current Version : 00.00.03.02 5633 Older Version : 00.00.03.01 564 565i. Added FW tranistion state for Hotplug scenario 566 5671 Release Date : Sun May 14 22:49:52 PDT 2006 - Sumant Patro <Sumant.Patro@lsil.com> 5682 Current Version : 00.00.03.01 5693 Older Version : 00.00.02.04 570 571i. Added support for ZCR controller. 572 573 New device id 0x413 added. 574 575ii. Bug fix : Disable controller interrupt before firing INIT cmd to FW. 576 577 Interrupt is enabled after required initialization is over. 578 This is done to ensure that driver is ready to handle interrupts when 579 it is generated by the controller. 580 581 -Sumant Patro <Sumant.Patro@lsil.com> 582 5831 Release Date : Wed Feb 03 14:31:44 PST 2006 - Sumant Patro <Sumant.Patro@lsil.com> 5842 Current Version : 00.00.02.04 5853 Older Version : 00.00.02.04 586 587i. Remove superfluous instance_lock 588 589 gets rid of the otherwise superfluous instance_lock and avoids an unsafe 590 unsynchronized access in the error handler. 591 592 - Christoph Hellwig <hch@lst.de> 593 594 5951 Release Date : Wed Feb 03 14:31:44 PST 2006 - Sumant Patro <Sumant.Patro@lsil.com> 5962 Current Version : 00.00.02.04 5973 Older Version : 00.00.02.04 598 599i. Support for 1078 type (ppc IOP) controller, device id : 0x60 added. 600 During initialization, depending on the device id, the template members 601 are initialized with function pointers specific to the ppc or 602 xscale controllers. 603 604 -Sumant Patro <Sumant.Patro@lsil.com> 605 6061 Release Date : Fri Feb 03 14:16:25 PST 2006 - Sumant Patro 607 <Sumant.Patro@lsil.com> 6082 Current Version : 00.00.02.04 6093 Older Version : 00.00.02.02 610i. Register 16 byte CDB capability with scsi midlayer 611 612 "This patch properly registers the 16 byte command length capability of the 613 megaraid_sas controlled hardware with the scsi midlayer. All megaraid_sas 614 hardware supports 16 byte CDB's." 615 616 -Joshua Giles <joshua_giles@dell.com> 617 6181 Release Date : Mon Jan 23 14:09:01 PST 2006 - Sumant Patro <Sumant.Patro@lsil.com> 6192 Current Version : 00.00.02.02 6203 Older Version : 00.00.02.01 621 622i. New template defined to represent each family of controllers (identified by processor used). 623 The template will have definitions that will be initialised to appropriate values for a specific family of controllers. The template definition has four function pointers. During driver initialisation the function pointers will be set based on the controller family type. This change is done to support new controllers that has different processors and thus different register set. 624 625 -Sumant Patro <Sumant.Patro@lsil.com> 626 6271 Release Date : Mon Dec 19 14:36:26 PST 2005 - Sumant Patro <Sumant.Patro@lsil.com> 6282 Current Version : 00.00.02.00-rc4 6293 Older Version : 00.00.02.01 630 631i. Code reorganized to remove code duplication in megasas_build_cmd. 632 633 "There's a lot of duplicate code megasas_build_cmd. Move that out of the different codepaths and merge the reminder of megasas_build_cmd into megasas_queue_command" 634 635 - Christoph Hellwig <hch@lst.de> 636 637ii. Defined MEGASAS_IOC_FIRMWARE32 for code paths that handles 32 bit applications in 64 bit systems. 638 639 "MEGASAS_IOC_FIRMWARE can't be redefined if CONFIG_COMPAT is set, we need to define a MEGASAS_IOC_FIRMWARE32 define so native binaries continue to work" 640 641 - Christoph Hellwig <hch@lst.de> 642