1============================= 2Netlink interface for ethtool 3============================= 4 5 6Basic information 7================= 8 9Netlink interface for ethtool uses generic netlink family ``ethtool`` 10(userspace application should use macros ``ETHTOOL_GENL_NAME`` and 11``ETHTOOL_GENL_VERSION`` defined in ``<linux/ethtool_netlink.h>`` uapi 12header). This family does not use a specific header, all information in 13requests and replies is passed using netlink attributes. 14 15The ethtool netlink interface uses extended ACK for error and warning 16reporting, userspace application developers are encouraged to make these 17messages available to user in a suitable way. 18 19Requests can be divided into three categories: "get" (retrieving information), 20"set" (setting parameters) and "action" (invoking an action). 21 22All "set" and "action" type requests require admin privileges 23(``CAP_NET_ADMIN`` in the namespace). Most "get" type requests are allowed for 24anyone but there are exceptions (where the response contains sensitive 25information). In some cases, the request as such is allowed for anyone but 26unprivileged users have attributes with sensitive information (e.g. 27wake-on-lan password) omitted. 28 29 30Conventions 31=========== 32 33Attributes which represent a boolean value usually use NLA_U8 type so that we 34can distinguish three states: "on", "off" and "not present" (meaning the 35information is not available in "get" requests or value is not to be changed 36in "set" requests). For these attributes, the "true" value should be passed as 37number 1 but any non-zero value should be understood as "true" by recipient. 38In the tables below, "bool" denotes NLA_U8 attributes interpreted in this way. 39 40In the message structure descriptions below, if an attribute name is suffixed 41with "+", parent nest can contain multiple attributes of the same type. This 42implements an array of entries. 43 44Attributes that need to be filled-in by device drivers and that are dumped to 45user space based on whether they are valid or not should not use zero as a 46valid value. This avoids the need to explicitly signal the validity of the 47attribute in the device driver API. 48 49 50Request header 51============== 52 53Each request or reply message contains a nested attribute with common header. 54Structure of this header is 55 56 ============================== ====== ============================= 57 ``ETHTOOL_A_HEADER_DEV_INDEX`` u32 device ifindex 58 ``ETHTOOL_A_HEADER_DEV_NAME`` string device name 59 ``ETHTOOL_A_HEADER_FLAGS`` u32 flags common for all requests 60 ``ETHTOOL_A_HEADER_PHY_INDEX`` u32 phy device index 61 ============================== ====== ============================= 62 63``ETHTOOL_A_HEADER_DEV_INDEX`` and ``ETHTOOL_A_HEADER_DEV_NAME`` identify the 64device message relates to. One of them is sufficient in requests, if both are 65used, they must identify the same device. Some requests, e.g. global string 66sets, do not require device identification. Most ``GET`` requests also allow 67dump requests without device identification to query the same information for 68all devices providing it (each device in a separate message). 69 70``ETHTOOL_A_HEADER_FLAGS`` is a bitmap of request flags common for all request 71types. The interpretation of these flags is the same for all request types but 72the flags may not apply to requests. Recognized flags are: 73 74 ================================= =================================== 75 ``ETHTOOL_FLAG_COMPACT_BITSETS`` use compact format bitsets in reply 76 ``ETHTOOL_FLAG_OMIT_REPLY`` omit optional reply (_SET and _ACT) 77 ``ETHTOOL_FLAG_STATS`` include optional device statistics 78 ================================= =================================== 79 80New request flags should follow the general idea that if the flag is not set, 81the behaviour is backward compatible, i.e. requests from old clients not aware 82of the flag should be interpreted the way the client expects. A client must 83not set flags it does not understand. 84 85``ETHTOOL_A_HEADER_PHY_INDEX`` identifies the Ethernet PHY the message relates to. 86As there are numerous commands that are related to PHY configuration, and because 87there may be more than one PHY on the link, the PHY index can be passed in the 88request for the commands that needs it. It is, however, not mandatory, and if it 89is not passed for commands that target a PHY, the net_device.phydev pointer 90is used. 91 92Bit sets 93======== 94 95For short bitmaps of (reasonably) fixed length, standard ``NLA_BITFIELD32`` 96type is used. For arbitrary length bitmaps, ethtool netlink uses a nested 97attribute with contents of one of two forms: compact (two binary bitmaps 98representing bit values and mask of affected bits) and bit-by-bit (list of 99bits identified by either index or name). 100 101Verbose (bit-by-bit) bitsets allow sending symbolic names for bits together 102with their values which saves a round trip (when the bitset is passed in a 103request) or at least a second request (when the bitset is in a reply). This is 104useful for one shot applications like traditional ethtool command. On the 105other hand, long running applications like ethtool monitor (displaying 106notifications) or network management daemons may prefer fetching the names 107only once and using compact form to save message size. Notifications from 108ethtool netlink interface always use compact form for bitsets. 109 110A bitset can represent either a value/mask pair (``ETHTOOL_A_BITSET_NOMASK`` 111not set) or a single bitmap (``ETHTOOL_A_BITSET_NOMASK`` set). In requests 112modifying a bitmap, the former changes the bit set in mask to values set in 113value and preserves the rest; the latter sets the bits set in the bitmap and 114clears the rest. 115 116Compact form: nested (bitset) attribute contents: 117 118 ============================ ====== ============================ 119 ``ETHTOOL_A_BITSET_NOMASK`` flag no mask, only a list 120 ``ETHTOOL_A_BITSET_SIZE`` u32 number of significant bits 121 ``ETHTOOL_A_BITSET_VALUE`` binary bitmap of bit values 122 ``ETHTOOL_A_BITSET_MASK`` binary bitmap of valid bits 123 ============================ ====== ============================ 124 125Value and mask must have length at least ``ETHTOOL_A_BITSET_SIZE`` bits 126rounded up to a multiple of 32 bits. They consist of 32-bit words in host byte 127order, words ordered from least significant to most significant (i.e. the same 128way as bitmaps are passed with ioctl interface). 129 130For compact form, ``ETHTOOL_A_BITSET_SIZE`` and ``ETHTOOL_A_BITSET_VALUE`` are 131mandatory. ``ETHTOOL_A_BITSET_MASK`` attribute is mandatory if 132``ETHTOOL_A_BITSET_NOMASK`` is not set (bitset represents a value/mask pair); 133if ``ETHTOOL_A_BITSET_NOMASK`` is not set, ``ETHTOOL_A_BITSET_MASK`` is not 134allowed (bitset represents a single bitmap. 135 136Kernel bit set length may differ from userspace length if older application is 137used on newer kernel or vice versa. If userspace bitmap is longer, an error is 138issued only if the request actually tries to set values of some bits not 139recognized by kernel. 140 141Bit-by-bit form: nested (bitset) attribute contents: 142 143 +------------------------------------+--------+-----------------------------+ 144 | ``ETHTOOL_A_BITSET_NOMASK`` | flag | no mask, only a list | 145 +------------------------------------+--------+-----------------------------+ 146 | ``ETHTOOL_A_BITSET_SIZE`` | u32 | number of significant bits | 147 +------------------------------------+--------+-----------------------------+ 148 | ``ETHTOOL_A_BITSET_BITS`` | nested | array of bits | 149 +-+----------------------------------+--------+-----------------------------+ 150 | | ``ETHTOOL_A_BITSET_BITS_BIT+`` | nested | one bit | 151 +-+-+--------------------------------+--------+-----------------------------+ 152 | | | ``ETHTOOL_A_BITSET_BIT_INDEX`` | u32 | bit index (0 for LSB) | 153 +-+-+--------------------------------+--------+-----------------------------+ 154 | | | ``ETHTOOL_A_BITSET_BIT_NAME`` | string | bit name | 155 +-+-+--------------------------------+--------+-----------------------------+ 156 | | | ``ETHTOOL_A_BITSET_BIT_VALUE`` | flag | present if bit is set | 157 +-+-+--------------------------------+--------+-----------------------------+ 158 159Bit size is optional for bit-by-bit form. ``ETHTOOL_A_BITSET_BITS`` nest can 160only contain ``ETHTOOL_A_BITSET_BITS_BIT`` attributes but there can be an 161arbitrary number of them. A bit may be identified by its index or by its 162name. When used in requests, listed bits are set to 0 or 1 according to 163``ETHTOOL_A_BITSET_BIT_VALUE``, the rest is preserved. A request fails if 164index exceeds kernel bit length or if name is not recognized. 165 166When ``ETHTOOL_A_BITSET_NOMASK`` flag is present, bitset is interpreted as 167a simple bitmap. ``ETHTOOL_A_BITSET_BIT_VALUE`` attributes are not used in 168such case. Such bitset represents a bitmap with listed bits set and the rest 169zero. 170 171In requests, application can use either form. Form used by kernel in reply is 172determined by ``ETHTOOL_FLAG_COMPACT_BITSETS`` flag in flags field of request 173header. Semantics of value and mask depends on the attribute. 174 175 176List of message types 177===================== 178 179All constants identifying message types use ``ETHTOOL_CMD_`` prefix and suffix 180according to message purpose: 181 182 ============== ====================================== 183 ``_GET`` userspace request to retrieve data 184 ``_SET`` userspace request to set data 185 ``_ACT`` userspace request to perform an action 186 ``_GET_REPLY`` kernel reply to a ``GET`` request 187 ``_SET_REPLY`` kernel reply to a ``SET`` request 188 ``_ACT_REPLY`` kernel reply to an ``ACT`` request 189 ``_NTF`` kernel notification 190 ============== ====================================== 191 192Userspace to kernel: 193 194 ===================================== ================================= 195 ``ETHTOOL_MSG_STRSET_GET`` get string set 196 ``ETHTOOL_MSG_LINKINFO_GET`` get link settings 197 ``ETHTOOL_MSG_LINKINFO_SET`` set link settings 198 ``ETHTOOL_MSG_LINKMODES_GET`` get link modes info 199 ``ETHTOOL_MSG_LINKMODES_SET`` set link modes info 200 ``ETHTOOL_MSG_LINKSTATE_GET`` get link state 201 ``ETHTOOL_MSG_DEBUG_GET`` get debugging settings 202 ``ETHTOOL_MSG_DEBUG_SET`` set debugging settings 203 ``ETHTOOL_MSG_WOL_GET`` get wake-on-lan settings 204 ``ETHTOOL_MSG_WOL_SET`` set wake-on-lan settings 205 ``ETHTOOL_MSG_FEATURES_GET`` get device features 206 ``ETHTOOL_MSG_FEATURES_SET`` set device features 207 ``ETHTOOL_MSG_PRIVFLAGS_GET`` get private flags 208 ``ETHTOOL_MSG_PRIVFLAGS_SET`` set private flags 209 ``ETHTOOL_MSG_RINGS_GET`` get ring sizes 210 ``ETHTOOL_MSG_RINGS_SET`` set ring sizes 211 ``ETHTOOL_MSG_CHANNELS_GET`` get channel counts 212 ``ETHTOOL_MSG_CHANNELS_SET`` set channel counts 213 ``ETHTOOL_MSG_COALESCE_GET`` get coalescing parameters 214 ``ETHTOOL_MSG_COALESCE_SET`` set coalescing parameters 215 ``ETHTOOL_MSG_PAUSE_GET`` get pause parameters 216 ``ETHTOOL_MSG_PAUSE_SET`` set pause parameters 217 ``ETHTOOL_MSG_EEE_GET`` get EEE settings 218 ``ETHTOOL_MSG_EEE_SET`` set EEE settings 219 ``ETHTOOL_MSG_TSINFO_GET`` get timestamping info 220 ``ETHTOOL_MSG_CABLE_TEST_ACT`` action start cable test 221 ``ETHTOOL_MSG_CABLE_TEST_TDR_ACT`` action start raw TDR cable test 222 ``ETHTOOL_MSG_TUNNEL_INFO_GET`` get tunnel offload info 223 ``ETHTOOL_MSG_FEC_GET`` get FEC settings 224 ``ETHTOOL_MSG_FEC_SET`` set FEC settings 225 ``ETHTOOL_MSG_MODULE_EEPROM_GET`` read SFP module EEPROM 226 ``ETHTOOL_MSG_STATS_GET`` get standard statistics 227 ``ETHTOOL_MSG_PHC_VCLOCKS_GET`` get PHC virtual clocks info 228 ``ETHTOOL_MSG_MODULE_SET`` set transceiver module parameters 229 ``ETHTOOL_MSG_MODULE_GET`` get transceiver module parameters 230 ``ETHTOOL_MSG_PSE_SET`` set PSE parameters 231 ``ETHTOOL_MSG_PSE_GET`` get PSE parameters 232 ``ETHTOOL_MSG_RSS_GET`` get RSS settings 233 ``ETHTOOL_MSG_PLCA_GET_CFG`` get PLCA RS parameters 234 ``ETHTOOL_MSG_PLCA_SET_CFG`` set PLCA RS parameters 235 ``ETHTOOL_MSG_PLCA_GET_STATUS`` get PLCA RS status 236 ``ETHTOOL_MSG_MM_GET`` get MAC merge layer state 237 ``ETHTOOL_MSG_MM_SET`` set MAC merge layer parameters 238 ``ETHTOOL_MSG_MODULE_FW_FLASH_ACT`` flash transceiver module firmware 239 ===================================== ================================= 240 241Kernel to userspace: 242 243 ======================================== ================================= 244 ``ETHTOOL_MSG_STRSET_GET_REPLY`` string set contents 245 ``ETHTOOL_MSG_LINKINFO_GET_REPLY`` link settings 246 ``ETHTOOL_MSG_LINKINFO_NTF`` link settings notification 247 ``ETHTOOL_MSG_LINKMODES_GET_REPLY`` link modes info 248 ``ETHTOOL_MSG_LINKMODES_NTF`` link modes notification 249 ``ETHTOOL_MSG_LINKSTATE_GET_REPLY`` link state info 250 ``ETHTOOL_MSG_DEBUG_GET_REPLY`` debugging settings 251 ``ETHTOOL_MSG_DEBUG_NTF`` debugging settings notification 252 ``ETHTOOL_MSG_WOL_GET_REPLY`` wake-on-lan settings 253 ``ETHTOOL_MSG_WOL_NTF`` wake-on-lan settings notification 254 ``ETHTOOL_MSG_FEATURES_GET_REPLY`` device features 255 ``ETHTOOL_MSG_FEATURES_SET_REPLY`` optional reply to FEATURES_SET 256 ``ETHTOOL_MSG_FEATURES_NTF`` netdev features notification 257 ``ETHTOOL_MSG_PRIVFLAGS_GET_REPLY`` private flags 258 ``ETHTOOL_MSG_PRIVFLAGS_NTF`` private flags 259 ``ETHTOOL_MSG_RINGS_GET_REPLY`` ring sizes 260 ``ETHTOOL_MSG_RINGS_NTF`` ring sizes 261 ``ETHTOOL_MSG_CHANNELS_GET_REPLY`` channel counts 262 ``ETHTOOL_MSG_CHANNELS_NTF`` channel counts 263 ``ETHTOOL_MSG_COALESCE_GET_REPLY`` coalescing parameters 264 ``ETHTOOL_MSG_COALESCE_NTF`` coalescing parameters 265 ``ETHTOOL_MSG_PAUSE_GET_REPLY`` pause parameters 266 ``ETHTOOL_MSG_PAUSE_NTF`` pause parameters 267 ``ETHTOOL_MSG_EEE_GET_REPLY`` EEE settings 268 ``ETHTOOL_MSG_EEE_NTF`` EEE settings 269 ``ETHTOOL_MSG_TSINFO_GET_REPLY`` timestamping info 270 ``ETHTOOL_MSG_CABLE_TEST_NTF`` Cable test results 271 ``ETHTOOL_MSG_CABLE_TEST_TDR_NTF`` Cable test TDR results 272 ``ETHTOOL_MSG_TUNNEL_INFO_GET_REPLY`` tunnel offload info 273 ``ETHTOOL_MSG_FEC_GET_REPLY`` FEC settings 274 ``ETHTOOL_MSG_FEC_NTF`` FEC settings 275 ``ETHTOOL_MSG_MODULE_EEPROM_GET_REPLY`` read SFP module EEPROM 276 ``ETHTOOL_MSG_STATS_GET_REPLY`` standard statistics 277 ``ETHTOOL_MSG_PHC_VCLOCKS_GET_REPLY`` PHC virtual clocks info 278 ``ETHTOOL_MSG_MODULE_GET_REPLY`` transceiver module parameters 279 ``ETHTOOL_MSG_PSE_GET_REPLY`` PSE parameters 280 ``ETHTOOL_MSG_RSS_GET_REPLY`` RSS settings 281 ``ETHTOOL_MSG_PLCA_GET_CFG_REPLY`` PLCA RS parameters 282 ``ETHTOOL_MSG_PLCA_GET_STATUS_REPLY`` PLCA RS status 283 ``ETHTOOL_MSG_PLCA_NTF`` PLCA RS parameters 284 ``ETHTOOL_MSG_MM_GET_REPLY`` MAC merge layer status 285 ``ETHTOOL_MSG_MODULE_FW_FLASH_NTF`` transceiver module flash updates 286 ======================================== ================================= 287 288``GET`` requests are sent by userspace applications to retrieve device 289information. They usually do not contain any message specific attributes. 290Kernel replies with corresponding "GET_REPLY" message. For most types, ``GET`` 291request with ``NLM_F_DUMP`` and no device identification can be used to query 292the information for all devices supporting the request. 293 294If the data can be also modified, corresponding ``SET`` message with the same 295layout as corresponding ``GET_REPLY`` is used to request changes. Only 296attributes where a change is requested are included in such request (also, not 297all attributes may be changed). Replies to most ``SET`` request consist only 298of error code and extack; if kernel provides additional data, it is sent in 299the form of corresponding ``SET_REPLY`` message which can be suppressed by 300setting ``ETHTOOL_FLAG_OMIT_REPLY`` flag in request header. 301 302Data modification also triggers sending a ``NTF`` message with a notification. 303These usually bear only a subset of attributes which was affected by the 304change. The same notification is issued if the data is modified using other 305means (mostly ioctl ethtool interface). Unlike notifications from ethtool 306netlink code which are only sent if something actually changed, notifications 307triggered by ioctl interface may be sent even if the request did not actually 308change any data. 309 310``ACT`` messages request kernel (driver) to perform a specific action. If some 311information is reported by kernel (which can be suppressed by setting 312``ETHTOOL_FLAG_OMIT_REPLY`` flag in request header), the reply takes form of 313an ``ACT_REPLY`` message. Performing an action also triggers a notification 314(``NTF`` message). 315 316Later sections describe the format and semantics of these messages. 317 318 319STRSET_GET 320========== 321 322Requests contents of a string set as provided by ioctl commands 323``ETHTOOL_GSSET_INFO`` and ``ETHTOOL_GSTRINGS.`` String sets are not user 324writeable so that the corresponding ``STRSET_SET`` message is only used in 325kernel replies. There are two types of string sets: global (independent of 326a device, e.g. device feature names) and device specific (e.g. device private 327flags). 328 329Request contents: 330 331 +---------------------------------------+--------+------------------------+ 332 | ``ETHTOOL_A_STRSET_HEADER`` | nested | request header | 333 +---------------------------------------+--------+------------------------+ 334 | ``ETHTOOL_A_STRSET_STRINGSETS`` | nested | string set to request | 335 +-+-------------------------------------+--------+------------------------+ 336 | | ``ETHTOOL_A_STRINGSETS_STRINGSET+`` | nested | one string set | 337 +-+-+-----------------------------------+--------+------------------------+ 338 | | | ``ETHTOOL_A_STRINGSET_ID`` | u32 | set id | 339 +-+-+-----------------------------------+--------+------------------------+ 340 341Kernel response contents: 342 343 +---------------------------------------+--------+-----------------------+ 344 | ``ETHTOOL_A_STRSET_HEADER`` | nested | reply header | 345 +---------------------------------------+--------+-----------------------+ 346 | ``ETHTOOL_A_STRSET_STRINGSETS`` | nested | array of string sets | 347 +-+-------------------------------------+--------+-----------------------+ 348 | | ``ETHTOOL_A_STRINGSETS_STRINGSET+`` | nested | one string set | 349 +-+-+-----------------------------------+--------+-----------------------+ 350 | | | ``ETHTOOL_A_STRINGSET_ID`` | u32 | set id | 351 +-+-+-----------------------------------+--------+-----------------------+ 352 | | | ``ETHTOOL_A_STRINGSET_COUNT`` | u32 | number of strings | 353 +-+-+-----------------------------------+--------+-----------------------+ 354 | | | ``ETHTOOL_A_STRINGSET_STRINGS`` | nested | array of strings | 355 +-+-+-+---------------------------------+--------+-----------------------+ 356 | | | | ``ETHTOOL_A_STRINGS_STRING+`` | nested | one string | 357 +-+-+-+-+-------------------------------+--------+-----------------------+ 358 | | | | | ``ETHTOOL_A_STRING_INDEX`` | u32 | string index | 359 +-+-+-+-+-------------------------------+--------+-----------------------+ 360 | | | | | ``ETHTOOL_A_STRING_VALUE`` | string | string value | 361 +-+-+-+-+-------------------------------+--------+-----------------------+ 362 | ``ETHTOOL_A_STRSET_COUNTS_ONLY`` | flag | return only counts | 363 +---------------------------------------+--------+-----------------------+ 364 365Device identification in request header is optional. Depending on its presence 366a and ``NLM_F_DUMP`` flag, there are three type of ``STRSET_GET`` requests: 367 368 - no ``NLM_F_DUMP,`` no device: get "global" stringsets 369 - no ``NLM_F_DUMP``, with device: get string sets related to the device 370 - ``NLM_F_DUMP``, no device: get device related string sets for all devices 371 372If there is no ``ETHTOOL_A_STRSET_STRINGSETS`` array, all string sets of 373requested type are returned, otherwise only those specified in the request. 374Flag ``ETHTOOL_A_STRSET_COUNTS_ONLY`` tells kernel to only return string 375counts of the sets, not the actual strings. 376 377 378LINKINFO_GET 379============ 380 381Requests link settings as provided by ``ETHTOOL_GLINKSETTINGS`` except for 382link modes and autonegotiation related information. The request does not use 383any attributes. 384 385Request contents: 386 387 ==================================== ====== ========================== 388 ``ETHTOOL_A_LINKINFO_HEADER`` nested request header 389 ==================================== ====== ========================== 390 391Kernel response contents: 392 393 ==================================== ====== ========================== 394 ``ETHTOOL_A_LINKINFO_HEADER`` nested reply header 395 ``ETHTOOL_A_LINKINFO_PORT`` u8 physical port 396 ``ETHTOOL_A_LINKINFO_PHYADDR`` u8 phy MDIO address 397 ``ETHTOOL_A_LINKINFO_TP_MDIX`` u8 MDI(-X) status 398 ``ETHTOOL_A_LINKINFO_TP_MDIX_CTRL`` u8 MDI(-X) control 399 ``ETHTOOL_A_LINKINFO_TRANSCEIVER`` u8 transceiver 400 ==================================== ====== ========================== 401 402Attributes and their values have the same meaning as matching members of the 403corresponding ioctl structures. 404 405``LINKINFO_GET`` allows dump requests (kernel returns reply message for all 406devices supporting the request). 407 408 409LINKINFO_SET 410============ 411 412``LINKINFO_SET`` request allows setting some of the attributes reported by 413``LINKINFO_GET``. 414 415Request contents: 416 417 ==================================== ====== ========================== 418 ``ETHTOOL_A_LINKINFO_HEADER`` nested request header 419 ``ETHTOOL_A_LINKINFO_PORT`` u8 physical port 420 ``ETHTOOL_A_LINKINFO_PHYADDR`` u8 phy MDIO address 421 ``ETHTOOL_A_LINKINFO_TP_MDIX_CTRL`` u8 MDI(-X) control 422 ==================================== ====== ========================== 423 424MDI(-X) status and transceiver cannot be set, request with the corresponding 425attributes is rejected. 426 427 428LINKMODES_GET 429============= 430 431Requests link modes (supported, advertised and peer advertised) and related 432information (autonegotiation status, link speed and duplex) as provided by 433``ETHTOOL_GLINKSETTINGS``. The request does not use any attributes. 434 435Request contents: 436 437 ==================================== ====== ========================== 438 ``ETHTOOL_A_LINKMODES_HEADER`` nested request header 439 ==================================== ====== ========================== 440 441Kernel response contents: 442 443 ========================================== ====== ========================== 444 ``ETHTOOL_A_LINKMODES_HEADER`` nested reply header 445 ``ETHTOOL_A_LINKMODES_AUTONEG`` u8 autonegotiation status 446 ``ETHTOOL_A_LINKMODES_OURS`` bitset advertised link modes 447 ``ETHTOOL_A_LINKMODES_PEER`` bitset partner link modes 448 ``ETHTOOL_A_LINKMODES_SPEED`` u32 link speed (Mb/s) 449 ``ETHTOOL_A_LINKMODES_DUPLEX`` u8 duplex mode 450 ``ETHTOOL_A_LINKMODES_MASTER_SLAVE_CFG`` u8 Master/slave port mode 451 ``ETHTOOL_A_LINKMODES_MASTER_SLAVE_STATE`` u8 Master/slave port state 452 ``ETHTOOL_A_LINKMODES_RATE_MATCHING`` u8 PHY rate matching 453 ========================================== ====== ========================== 454 455For ``ETHTOOL_A_LINKMODES_OURS``, value represents advertised modes and mask 456represents supported modes. ``ETHTOOL_A_LINKMODES_PEER`` in the reply is a bit 457list. 458 459``LINKMODES_GET`` allows dump requests (kernel returns reply messages for all 460devices supporting the request). 461 462 463LINKMODES_SET 464============= 465 466Request contents: 467 468 ========================================== ====== ========================== 469 ``ETHTOOL_A_LINKMODES_HEADER`` nested request header 470 ``ETHTOOL_A_LINKMODES_AUTONEG`` u8 autonegotiation status 471 ``ETHTOOL_A_LINKMODES_OURS`` bitset advertised link modes 472 ``ETHTOOL_A_LINKMODES_PEER`` bitset partner link modes 473 ``ETHTOOL_A_LINKMODES_SPEED`` u32 link speed (Mb/s) 474 ``ETHTOOL_A_LINKMODES_DUPLEX`` u8 duplex mode 475 ``ETHTOOL_A_LINKMODES_MASTER_SLAVE_CFG`` u8 Master/slave port mode 476 ``ETHTOOL_A_LINKMODES_RATE_MATCHING`` u8 PHY rate matching 477 ``ETHTOOL_A_LINKMODES_LANES`` u32 lanes 478 ========================================== ====== ========================== 479 480``ETHTOOL_A_LINKMODES_OURS`` bit set allows setting advertised link modes. If 481autonegotiation is on (either set now or kept from before), advertised modes 482are not changed (no ``ETHTOOL_A_LINKMODES_OURS`` attribute) and at least one 483of speed, duplex and lanes is specified, kernel adjusts advertised modes to all 484supported modes matching speed, duplex, lanes or all (whatever is specified). 485This autoselection is done on ethtool side with ioctl interface, netlink 486interface is supposed to allow requesting changes without knowing what exactly 487kernel supports. 488 489 490LINKSTATE_GET 491============= 492 493Requests link state information. Link up/down flag (as provided by 494``ETHTOOL_GLINK`` ioctl command) is provided. Optionally, extended state might 495be provided as well. In general, extended state describes reasons for why a port 496is down, or why it operates in some non-obvious mode. This request does not have 497any attributes. 498 499Request contents: 500 501 ==================================== ====== ========================== 502 ``ETHTOOL_A_LINKSTATE_HEADER`` nested request header 503 ==================================== ====== ========================== 504 505Kernel response contents: 506 507 ==================================== ====== ============================ 508 ``ETHTOOL_A_LINKSTATE_HEADER`` nested reply header 509 ``ETHTOOL_A_LINKSTATE_LINK`` bool link state (up/down) 510 ``ETHTOOL_A_LINKSTATE_SQI`` u32 Current Signal Quality Index 511 ``ETHTOOL_A_LINKSTATE_SQI_MAX`` u32 Max support SQI value 512 ``ETHTOOL_A_LINKSTATE_EXT_STATE`` u8 link extended state 513 ``ETHTOOL_A_LINKSTATE_EXT_SUBSTATE`` u8 link extended substate 514 ``ETHTOOL_A_LINKSTATE_EXT_DOWN_CNT`` u32 count of link down events 515 ==================================== ====== ============================ 516 517For most NIC drivers, the value of ``ETHTOOL_A_LINKSTATE_LINK`` returns 518carrier flag provided by ``netif_carrier_ok()`` but there are drivers which 519define their own handler. 520 521``ETHTOOL_A_LINKSTATE_EXT_STATE`` and ``ETHTOOL_A_LINKSTATE_EXT_SUBSTATE`` are 522optional values. ethtool core can provide either both 523``ETHTOOL_A_LINKSTATE_EXT_STATE`` and ``ETHTOOL_A_LINKSTATE_EXT_SUBSTATE``, 524or only ``ETHTOOL_A_LINKSTATE_EXT_STATE``, or none of them. 525 526``LINKSTATE_GET`` allows dump requests (kernel returns reply messages for all 527devices supporting the request). 528 529 530Link extended states: 531 532 ================================================ ============================================ 533 ``ETHTOOL_LINK_EXT_STATE_AUTONEG`` States relating to the autonegotiation or 534 issues therein 535 536 ``ETHTOOL_LINK_EXT_STATE_LINK_TRAINING_FAILURE`` Failure during link training 537 538 ``ETHTOOL_LINK_EXT_STATE_LINK_LOGICAL_MISMATCH`` Logical mismatch in physical coding sublayer 539 or forward error correction sublayer 540 541 ``ETHTOOL_LINK_EXT_STATE_BAD_SIGNAL_INTEGRITY`` Signal integrity issues 542 543 ``ETHTOOL_LINK_EXT_STATE_NO_CABLE`` No cable connected 544 545 ``ETHTOOL_LINK_EXT_STATE_CABLE_ISSUE`` Failure is related to cable, 546 e.g., unsupported cable 547 548 ``ETHTOOL_LINK_EXT_STATE_EEPROM_ISSUE`` Failure is related to EEPROM, e.g., failure 549 during reading or parsing the data 550 551 ``ETHTOOL_LINK_EXT_STATE_CALIBRATION_FAILURE`` Failure during calibration algorithm 552 553 ``ETHTOOL_LINK_EXT_STATE_POWER_BUDGET_EXCEEDED`` The hardware is not able to provide the 554 power required from cable or module 555 556 ``ETHTOOL_LINK_EXT_STATE_OVERHEAT`` The module is overheated 557 558 ``ETHTOOL_LINK_EXT_STATE_MODULE`` Transceiver module issue 559 ================================================ ============================================ 560 561Link extended substates: 562 563 Autoneg substates: 564 565 =============================================================== ================================ 566 ``ETHTOOL_LINK_EXT_SUBSTATE_AN_NO_PARTNER_DETECTED`` Peer side is down 567 568 ``ETHTOOL_LINK_EXT_SUBSTATE_AN_ACK_NOT_RECEIVED`` Ack not received from peer side 569 570 ``ETHTOOL_LINK_EXT_SUBSTATE_AN_NEXT_PAGE_EXCHANGE_FAILED`` Next page exchange failed 571 572 ``ETHTOOL_LINK_EXT_SUBSTATE_AN_NO_PARTNER_DETECTED_FORCE_MODE`` Peer side is down during force 573 mode or there is no agreement of 574 speed 575 576 ``ETHTOOL_LINK_EXT_SUBSTATE_AN_FEC_MISMATCH_DURING_OVERRIDE`` Forward error correction modes 577 in both sides are mismatched 578 579 ``ETHTOOL_LINK_EXT_SUBSTATE_AN_NO_HCD`` No Highest Common Denominator 580 =============================================================== ================================ 581 582 Link training substates: 583 584 =========================================================================== ==================== 585 ``ETHTOOL_LINK_EXT_SUBSTATE_LT_KR_FRAME_LOCK_NOT_ACQUIRED`` Frames were not 586 recognized, the 587 lock failed 588 589 ``ETHTOOL_LINK_EXT_SUBSTATE_LT_KR_LINK_INHIBIT_TIMEOUT`` The lock did not 590 occur before 591 timeout 592 593 ``ETHTOOL_LINK_EXT_SUBSTATE_LT_KR_LINK_PARTNER_DID_NOT_SET_RECEIVER_READY`` Peer side did not 594 send ready signal 595 after training 596 process 597 598 ``ETHTOOL_LINK_EXT_SUBSTATE_LT_REMOTE_FAULT`` Remote side is not 599 ready yet 600 =========================================================================== ==================== 601 602 Link logical mismatch substates: 603 604 ================================================================ =============================== 605 ``ETHTOOL_LINK_EXT_SUBSTATE_LLM_PCS_DID_NOT_ACQUIRE_BLOCK_LOCK`` Physical coding sublayer was 606 not locked in first phase - 607 block lock 608 609 ``ETHTOOL_LINK_EXT_SUBSTATE_LLM_PCS_DID_NOT_ACQUIRE_AM_LOCK`` Physical coding sublayer was 610 not locked in second phase - 611 alignment markers lock 612 613 ``ETHTOOL_LINK_EXT_SUBSTATE_LLM_PCS_DID_NOT_GET_ALIGN_STATUS`` Physical coding sublayer did 614 not get align status 615 616 ``ETHTOOL_LINK_EXT_SUBSTATE_LLM_FC_FEC_IS_NOT_LOCKED`` FC forward error correction is 617 not locked 618 619 ``ETHTOOL_LINK_EXT_SUBSTATE_LLM_RS_FEC_IS_NOT_LOCKED`` RS forward error correction is 620 not locked 621 ================================================================ =============================== 622 623 Bad signal integrity substates: 624 625 ================================================================= ============================= 626 ``ETHTOOL_LINK_EXT_SUBSTATE_BSI_LARGE_NUMBER_OF_PHYSICAL_ERRORS`` Large number of physical 627 errors 628 629 ``ETHTOOL_LINK_EXT_SUBSTATE_BSI_UNSUPPORTED_RATE`` The system attempted to 630 operate the cable at a rate 631 that is not formally 632 supported, which led to 633 signal integrity issues 634 635 ``ETHTOOL_LINK_EXT_SUBSTATE_BSI_SERDES_REFERENCE_CLOCK_LOST`` The external clock signal for 636 SerDes is too weak or 637 unavailable. 638 639 ``ETHTOOL_LINK_EXT_SUBSTATE_BSI_SERDES_ALOS`` The received signal for 640 SerDes is too weak because 641 analog loss of signal. 642 ================================================================= ============================= 643 644 Cable issue substates: 645 646 =================================================== ============================================ 647 ``ETHTOOL_LINK_EXT_SUBSTATE_CI_UNSUPPORTED_CABLE`` Unsupported cable 648 649 ``ETHTOOL_LINK_EXT_SUBSTATE_CI_CABLE_TEST_FAILURE`` Cable test failure 650 =================================================== ============================================ 651 652 Transceiver module issue substates: 653 654 =================================================== ============================================ 655 ``ETHTOOL_LINK_EXT_SUBSTATE_MODULE_CMIS_NOT_READY`` The CMIS Module State Machine did not reach 656 the ModuleReady state. For example, if the 657 module is stuck at ModuleFault state 658 =================================================== ============================================ 659 660DEBUG_GET 661========= 662 663Requests debugging settings of a device. At the moment, only message mask is 664provided. 665 666Request contents: 667 668 ==================================== ====== ========================== 669 ``ETHTOOL_A_DEBUG_HEADER`` nested request header 670 ==================================== ====== ========================== 671 672Kernel response contents: 673 674 ==================================== ====== ========================== 675 ``ETHTOOL_A_DEBUG_HEADER`` nested reply header 676 ``ETHTOOL_A_DEBUG_MSGMASK`` bitset message mask 677 ==================================== ====== ========================== 678 679The message mask (``ETHTOOL_A_DEBUG_MSGMASK``) is equal to message level as 680provided by ``ETHTOOL_GMSGLVL`` and set by ``ETHTOOL_SMSGLVL`` in ioctl 681interface. While it is called message level there for historical reasons, most 682drivers and almost all newer drivers use it as a mask of enabled message 683classes (represented by ``NETIF_MSG_*`` constants); therefore netlink 684interface follows its actual use in practice. 685 686``DEBUG_GET`` allows dump requests (kernel returns reply messages for all 687devices supporting the request). 688 689 690DEBUG_SET 691========= 692 693Set or update debugging settings of a device. At the moment, only message mask 694is supported. 695 696Request contents: 697 698 ==================================== ====== ========================== 699 ``ETHTOOL_A_DEBUG_HEADER`` nested request header 700 ``ETHTOOL_A_DEBUG_MSGMASK`` bitset message mask 701 ==================================== ====== ========================== 702 703``ETHTOOL_A_DEBUG_MSGMASK`` bit set allows setting or modifying mask of 704enabled debugging message types for the device. 705 706 707WOL_GET 708======= 709 710Query device wake-on-lan settings. Unlike most "GET" type requests, 711``ETHTOOL_MSG_WOL_GET`` requires (netns) ``CAP_NET_ADMIN`` privileges as it 712(potentially) provides SecureOn(tm) password which is confidential. 713 714Request contents: 715 716 ==================================== ====== ========================== 717 ``ETHTOOL_A_WOL_HEADER`` nested request header 718 ==================================== ====== ========================== 719 720Kernel response contents: 721 722 ==================================== ====== ========================== 723 ``ETHTOOL_A_WOL_HEADER`` nested reply header 724 ``ETHTOOL_A_WOL_MODES`` bitset mask of enabled WoL modes 725 ``ETHTOOL_A_WOL_SOPASS`` binary SecureOn(tm) password 726 ==================================== ====== ========================== 727 728In reply, ``ETHTOOL_A_WOL_MODES`` mask consists of modes supported by the 729device, value of modes which are enabled. ``ETHTOOL_A_WOL_SOPASS`` is only 730included in reply if ``WAKE_MAGICSECURE`` mode is supported. 731 732 733WOL_SET 734======= 735 736Set or update wake-on-lan settings. 737 738Request contents: 739 740 ==================================== ====== ========================== 741 ``ETHTOOL_A_WOL_HEADER`` nested request header 742 ``ETHTOOL_A_WOL_MODES`` bitset enabled WoL modes 743 ``ETHTOOL_A_WOL_SOPASS`` binary SecureOn(tm) password 744 ==================================== ====== ========================== 745 746``ETHTOOL_A_WOL_SOPASS`` is only allowed for devices supporting 747``WAKE_MAGICSECURE`` mode. 748 749 750FEATURES_GET 751============ 752 753Gets netdev features like ``ETHTOOL_GFEATURES`` ioctl request. 754 755Request contents: 756 757 ==================================== ====== ========================== 758 ``ETHTOOL_A_FEATURES_HEADER`` nested request header 759 ==================================== ====== ========================== 760 761Kernel response contents: 762 763 ==================================== ====== ========================== 764 ``ETHTOOL_A_FEATURES_HEADER`` nested reply header 765 ``ETHTOOL_A_FEATURES_HW`` bitset dev->hw_features 766 ``ETHTOOL_A_FEATURES_WANTED`` bitset dev->wanted_features 767 ``ETHTOOL_A_FEATURES_ACTIVE`` bitset dev->features 768 ``ETHTOOL_A_FEATURES_NOCHANGE`` bitset NETIF_F_NEVER_CHANGE 769 ==================================== ====== ========================== 770 771Bitmaps in kernel response have the same meaning as bitmaps used in ioctl 772interference but attribute names are different (they are based on 773corresponding members of struct net_device). Legacy "flags" are not provided, 774if userspace needs them (most likely only ethtool for backward compatibility), 775it can calculate their values from related feature bits itself. 776ETHA_FEATURES_HW uses mask consisting of all features recognized by kernel (to 777provide all names when using verbose bitmap format), the other three use no 778mask (simple bit lists). 779 780 781FEATURES_SET 782============ 783 784Request to set netdev features like ``ETHTOOL_SFEATURES`` ioctl request. 785 786Request contents: 787 788 ==================================== ====== ========================== 789 ``ETHTOOL_A_FEATURES_HEADER`` nested request header 790 ``ETHTOOL_A_FEATURES_WANTED`` bitset requested features 791 ==================================== ====== ========================== 792 793Kernel response contents: 794 795 ==================================== ====== ========================== 796 ``ETHTOOL_A_FEATURES_HEADER`` nested reply header 797 ``ETHTOOL_A_FEATURES_WANTED`` bitset diff wanted vs. result 798 ``ETHTOOL_A_FEATURES_ACTIVE`` bitset diff old vs. new active 799 ==================================== ====== ========================== 800 801Request contains only one bitset which can be either value/mask pair (request 802to change specific feature bits and leave the rest) or only a value (request 803to set all features to specified set). 804 805As request is subject to netdev_change_features() sanity checks, optional 806kernel reply (can be suppressed by ``ETHTOOL_FLAG_OMIT_REPLY`` flag in request 807header) informs client about the actual result. ``ETHTOOL_A_FEATURES_WANTED`` 808reports the difference between client request and actual result: mask consists 809of bits which differ between requested features and result (dev->features 810after the operation), value consists of values of these bits in the request 811(i.e. negated values from resulting features). ``ETHTOOL_A_FEATURES_ACTIVE`` 812reports the difference between old and new dev->features: mask consists of 813bits which have changed, values are their values in new dev->features (after 814the operation). 815 816``ETHTOOL_MSG_FEATURES_NTF`` notification is sent not only if device features 817are modified using ``ETHTOOL_MSG_FEATURES_SET`` request or on of ethtool ioctl 818request but also each time features are modified with netdev_update_features() 819or netdev_change_features(). 820 821 822PRIVFLAGS_GET 823============= 824 825Gets private flags like ``ETHTOOL_GPFLAGS`` ioctl request. 826 827Request contents: 828 829 ==================================== ====== ========================== 830 ``ETHTOOL_A_PRIVFLAGS_HEADER`` nested request header 831 ==================================== ====== ========================== 832 833Kernel response contents: 834 835 ==================================== ====== ========================== 836 ``ETHTOOL_A_PRIVFLAGS_HEADER`` nested reply header 837 ``ETHTOOL_A_PRIVFLAGS_FLAGS`` bitset private flags 838 ==================================== ====== ========================== 839 840``ETHTOOL_A_PRIVFLAGS_FLAGS`` is a bitset with values of device private flags. 841These flags are defined by driver, their number and names (and also meaning) 842are device dependent. For compact bitset format, names can be retrieved as 843``ETH_SS_PRIV_FLAGS`` string set. If verbose bitset format is requested, 844response uses all private flags supported by the device as mask so that client 845gets the full information without having to fetch the string set with names. 846 847 848PRIVFLAGS_SET 849============= 850 851Sets or modifies values of device private flags like ``ETHTOOL_SPFLAGS`` 852ioctl request. 853 854Request contents: 855 856 ==================================== ====== ========================== 857 ``ETHTOOL_A_PRIVFLAGS_HEADER`` nested request header 858 ``ETHTOOL_A_PRIVFLAGS_FLAGS`` bitset private flags 859 ==================================== ====== ========================== 860 861``ETHTOOL_A_PRIVFLAGS_FLAGS`` can either set the whole set of private flags or 862modify only values of some of them. 863 864 865RINGS_GET 866========= 867 868Gets ring sizes like ``ETHTOOL_GRINGPARAM`` ioctl request. 869 870Request contents: 871 872 ==================================== ====== ========================== 873 ``ETHTOOL_A_RINGS_HEADER`` nested request header 874 ==================================== ====== ========================== 875 876Kernel response contents: 877 878 ======================================= ====== =========================== 879 ``ETHTOOL_A_RINGS_HEADER`` nested reply header 880 ``ETHTOOL_A_RINGS_RX_MAX`` u32 max size of RX ring 881 ``ETHTOOL_A_RINGS_RX_MINI_MAX`` u32 max size of RX mini ring 882 ``ETHTOOL_A_RINGS_RX_JUMBO_MAX`` u32 max size of RX jumbo ring 883 ``ETHTOOL_A_RINGS_TX_MAX`` u32 max size of TX ring 884 ``ETHTOOL_A_RINGS_RX`` u32 size of RX ring 885 ``ETHTOOL_A_RINGS_RX_MINI`` u32 size of RX mini ring 886 ``ETHTOOL_A_RINGS_RX_JUMBO`` u32 size of RX jumbo ring 887 ``ETHTOOL_A_RINGS_TX`` u32 size of TX ring 888 ``ETHTOOL_A_RINGS_RX_BUF_LEN`` u32 size of buffers on the ring 889 ``ETHTOOL_A_RINGS_TCP_DATA_SPLIT`` u8 TCP header / data split 890 ``ETHTOOL_A_RINGS_CQE_SIZE`` u32 Size of TX/RX CQE 891 ``ETHTOOL_A_RINGS_TX_PUSH`` u8 flag of TX Push mode 892 ``ETHTOOL_A_RINGS_RX_PUSH`` u8 flag of RX Push mode 893 ``ETHTOOL_A_RINGS_TX_PUSH_BUF_LEN`` u32 size of TX push buffer 894 ``ETHTOOL_A_RINGS_TX_PUSH_BUF_LEN_MAX`` u32 max size of TX push buffer 895 ======================================= ====== =========================== 896 897``ETHTOOL_A_RINGS_TCP_DATA_SPLIT`` indicates whether the device is usable with 898page-flipping TCP zero-copy receive (``getsockopt(TCP_ZEROCOPY_RECEIVE)``). 899If enabled the device is configured to place frame headers and data into 900separate buffers. The device configuration must make it possible to receive 901full memory pages of data, for example because MTU is high enough or through 902HW-GRO. 903 904``ETHTOOL_A_RINGS_[RX|TX]_PUSH`` flag is used to enable descriptor fast 905path to send or receive packets. In ordinary path, driver fills descriptors in DRAM and 906notifies NIC hardware. In fast path, driver pushes descriptors to the device 907through MMIO writes, thus reducing the latency. However, enabling this feature 908may increase the CPU cost. Drivers may enforce additional per-packet 909eligibility checks (e.g. on packet size). 910 911``ETHTOOL_A_RINGS_TX_PUSH_BUF_LEN`` specifies the maximum number of bytes of a 912transmitted packet a driver can push directly to the underlying device 913('push' mode). Pushing some of the payload bytes to the device has the 914advantages of reducing latency for small packets by avoiding DMA mapping (same 915as ``ETHTOOL_A_RINGS_TX_PUSH`` parameter) as well as allowing the underlying 916device to process packet headers ahead of fetching its payload. 917This can help the device to make fast actions based on the packet's headers. 918This is similar to the "tx-copybreak" parameter, which copies the packet to a 919preallocated DMA memory area instead of mapping new memory. However, 920tx-push-buff parameter copies the packet directly to the device to allow the 921device to take faster actions on the packet. 922 923RINGS_SET 924========= 925 926Sets ring sizes like ``ETHTOOL_SRINGPARAM`` ioctl request. 927 928Request contents: 929 930 ==================================== ====== =========================== 931 ``ETHTOOL_A_RINGS_HEADER`` nested reply header 932 ``ETHTOOL_A_RINGS_RX`` u32 size of RX ring 933 ``ETHTOOL_A_RINGS_RX_MINI`` u32 size of RX mini ring 934 ``ETHTOOL_A_RINGS_RX_JUMBO`` u32 size of RX jumbo ring 935 ``ETHTOOL_A_RINGS_TX`` u32 size of TX ring 936 ``ETHTOOL_A_RINGS_RX_BUF_LEN`` u32 size of buffers on the ring 937 ``ETHTOOL_A_RINGS_CQE_SIZE`` u32 Size of TX/RX CQE 938 ``ETHTOOL_A_RINGS_TX_PUSH`` u8 flag of TX Push mode 939 ``ETHTOOL_A_RINGS_RX_PUSH`` u8 flag of RX Push mode 940 ``ETHTOOL_A_RINGS_TX_PUSH_BUF_LEN`` u32 size of TX push buffer 941 ==================================== ====== =========================== 942 943Kernel checks that requested ring sizes do not exceed limits reported by 944driver. Driver may impose additional constraints and may not support all 945attributes. 946 947 948``ETHTOOL_A_RINGS_CQE_SIZE`` specifies the completion queue event size. 949Completion queue events (CQE) are the events posted by NIC to indicate the 950completion status of a packet when the packet is sent (like send success or 951error) or received (like pointers to packet fragments). The CQE size parameter 952enables to modify the CQE size other than default size if NIC supports it. 953A bigger CQE can have more receive buffer pointers, and in turn the NIC can 954transfer a bigger frame from wire. Based on the NIC hardware, the overall 955completion queue size can be adjusted in the driver if CQE size is modified. 956 957CHANNELS_GET 958============ 959 960Gets channel counts like ``ETHTOOL_GCHANNELS`` ioctl request. 961 962Request contents: 963 964 ==================================== ====== ========================== 965 ``ETHTOOL_A_CHANNELS_HEADER`` nested request header 966 ==================================== ====== ========================== 967 968Kernel response contents: 969 970 ===================================== ====== ========================== 971 ``ETHTOOL_A_CHANNELS_HEADER`` nested reply header 972 ``ETHTOOL_A_CHANNELS_RX_MAX`` u32 max receive channels 973 ``ETHTOOL_A_CHANNELS_TX_MAX`` u32 max transmit channels 974 ``ETHTOOL_A_CHANNELS_OTHER_MAX`` u32 max other channels 975 ``ETHTOOL_A_CHANNELS_COMBINED_MAX`` u32 max combined channels 976 ``ETHTOOL_A_CHANNELS_RX_COUNT`` u32 receive channel count 977 ``ETHTOOL_A_CHANNELS_TX_COUNT`` u32 transmit channel count 978 ``ETHTOOL_A_CHANNELS_OTHER_COUNT`` u32 other channel count 979 ``ETHTOOL_A_CHANNELS_COMBINED_COUNT`` u32 combined channel count 980 ===================================== ====== ========================== 981 982 983CHANNELS_SET 984============ 985 986Sets channel counts like ``ETHTOOL_SCHANNELS`` ioctl request. 987 988Request contents: 989 990 ===================================== ====== ========================== 991 ``ETHTOOL_A_CHANNELS_HEADER`` nested request header 992 ``ETHTOOL_A_CHANNELS_RX_COUNT`` u32 receive channel count 993 ``ETHTOOL_A_CHANNELS_TX_COUNT`` u32 transmit channel count 994 ``ETHTOOL_A_CHANNELS_OTHER_COUNT`` u32 other channel count 995 ``ETHTOOL_A_CHANNELS_COMBINED_COUNT`` u32 combined channel count 996 ===================================== ====== ========================== 997 998Kernel checks that requested channel counts do not exceed limits reported by 999driver. Driver may impose additional constraints and may not support all 1000attributes. 1001 1002 1003COALESCE_GET 1004============ 1005 1006Gets coalescing parameters like ``ETHTOOL_GCOALESCE`` ioctl request. 1007 1008Request contents: 1009 1010 ==================================== ====== ========================== 1011 ``ETHTOOL_A_COALESCE_HEADER`` nested request header 1012 ==================================== ====== ========================== 1013 1014Kernel response contents: 1015 1016 =========================================== ====== ======================= 1017 ``ETHTOOL_A_COALESCE_HEADER`` nested reply header 1018 ``ETHTOOL_A_COALESCE_RX_USECS`` u32 delay (us), normal Rx 1019 ``ETHTOOL_A_COALESCE_RX_MAX_FRAMES`` u32 max packets, normal Rx 1020 ``ETHTOOL_A_COALESCE_RX_USECS_IRQ`` u32 delay (us), Rx in IRQ 1021 ``ETHTOOL_A_COALESCE_RX_MAX_FRAMES_IRQ`` u32 max packets, Rx in IRQ 1022 ``ETHTOOL_A_COALESCE_TX_USECS`` u32 delay (us), normal Tx 1023 ``ETHTOOL_A_COALESCE_TX_MAX_FRAMES`` u32 max packets, normal Tx 1024 ``ETHTOOL_A_COALESCE_TX_USECS_IRQ`` u32 delay (us), Tx in IRQ 1025 ``ETHTOOL_A_COALESCE_TX_MAX_FRAMES_IRQ`` u32 IRQ packets, Tx in IRQ 1026 ``ETHTOOL_A_COALESCE_STATS_BLOCK_USECS`` u32 delay of stats update 1027 ``ETHTOOL_A_COALESCE_USE_ADAPTIVE_RX`` bool adaptive Rx coalesce 1028 ``ETHTOOL_A_COALESCE_USE_ADAPTIVE_TX`` bool adaptive Tx coalesce 1029 ``ETHTOOL_A_COALESCE_PKT_RATE_LOW`` u32 threshold for low rate 1030 ``ETHTOOL_A_COALESCE_RX_USECS_LOW`` u32 delay (us), low Rx 1031 ``ETHTOOL_A_COALESCE_RX_MAX_FRAMES_LOW`` u32 max packets, low Rx 1032 ``ETHTOOL_A_COALESCE_TX_USECS_LOW`` u32 delay (us), low Tx 1033 ``ETHTOOL_A_COALESCE_TX_MAX_FRAMES_LOW`` u32 max packets, low Tx 1034 ``ETHTOOL_A_COALESCE_PKT_RATE_HIGH`` u32 threshold for high rate 1035 ``ETHTOOL_A_COALESCE_RX_USECS_HIGH`` u32 delay (us), high Rx 1036 ``ETHTOOL_A_COALESCE_RX_MAX_FRAMES_HIGH`` u32 max packets, high Rx 1037 ``ETHTOOL_A_COALESCE_TX_USECS_HIGH`` u32 delay (us), high Tx 1038 ``ETHTOOL_A_COALESCE_TX_MAX_FRAMES_HIGH`` u32 max packets, high Tx 1039 ``ETHTOOL_A_COALESCE_RATE_SAMPLE_INTERVAL`` u32 rate sampling interval 1040 ``ETHTOOL_A_COALESCE_USE_CQE_TX`` bool timer reset mode, Tx 1041 ``ETHTOOL_A_COALESCE_USE_CQE_RX`` bool timer reset mode, Rx 1042 ``ETHTOOL_A_COALESCE_TX_AGGR_MAX_BYTES`` u32 max aggr size, Tx 1043 ``ETHTOOL_A_COALESCE_TX_AGGR_MAX_FRAMES`` u32 max aggr packets, Tx 1044 ``ETHTOOL_A_COALESCE_TX_AGGR_TIME_USECS`` u32 time (us), aggr, Tx 1045 ``ETHTOOL_A_COALESCE_RX_PROFILE`` nested profile of DIM, Rx 1046 ``ETHTOOL_A_COALESCE_TX_PROFILE`` nested profile of DIM, Tx 1047 =========================================== ====== ======================= 1048 1049Attributes are only included in reply if their value is not zero or the 1050corresponding bit in ``ethtool_ops::supported_coalesce_params`` is set (i.e. 1051they are declared as supported by driver). 1052 1053Timer reset mode (``ETHTOOL_A_COALESCE_USE_CQE_TX`` and 1054``ETHTOOL_A_COALESCE_USE_CQE_RX``) controls the interaction between packet 1055arrival and the various time based delay parameters. By default timers are 1056expected to limit the max delay between any packet arrival/departure and a 1057corresponding interrupt. In this mode timer should be started by packet 1058arrival (sometimes delivery of previous interrupt) and reset when interrupt 1059is delivered. 1060Setting the appropriate attribute to 1 will enable ``CQE`` mode, where 1061each packet event resets the timer. In this mode timer is used to force 1062the interrupt if queue goes idle, while busy queues depend on the packet 1063limit to trigger interrupts. 1064 1065Tx aggregation consists of copying frames into a contiguous buffer so that they 1066can be submitted as a single IO operation. ``ETHTOOL_A_COALESCE_TX_AGGR_MAX_BYTES`` 1067describes the maximum size in bytes for the submitted buffer. 1068``ETHTOOL_A_COALESCE_TX_AGGR_MAX_FRAMES`` describes the maximum number of frames 1069that can be aggregated into a single buffer. 1070``ETHTOOL_A_COALESCE_TX_AGGR_TIME_USECS`` describes the amount of time in usecs, 1071counted since the first packet arrival in an aggregated block, after which the 1072block should be sent. 1073This feature is mainly of interest for specific USB devices which does not cope 1074well with frequent small-sized URBs transmissions. 1075 1076``ETHTOOL_A_COALESCE_RX_PROFILE`` and ``ETHTOOL_A_COALESCE_TX_PROFILE`` refer 1077to DIM parameters, see `Generic Network Dynamic Interrupt Moderation (Net DIM) 1078<https://www.kernel.org/doc/Documentation/networking/net_dim.rst>`_. 1079 1080COALESCE_SET 1081============ 1082 1083Sets coalescing parameters like ``ETHTOOL_SCOALESCE`` ioctl request. 1084 1085Request contents: 1086 1087 =========================================== ====== ======================= 1088 ``ETHTOOL_A_COALESCE_HEADER`` nested request header 1089 ``ETHTOOL_A_COALESCE_RX_USECS`` u32 delay (us), normal Rx 1090 ``ETHTOOL_A_COALESCE_RX_MAX_FRAMES`` u32 max packets, normal Rx 1091 ``ETHTOOL_A_COALESCE_RX_USECS_IRQ`` u32 delay (us), Rx in IRQ 1092 ``ETHTOOL_A_COALESCE_RX_MAX_FRAMES_IRQ`` u32 max packets, Rx in IRQ 1093 ``ETHTOOL_A_COALESCE_TX_USECS`` u32 delay (us), normal Tx 1094 ``ETHTOOL_A_COALESCE_TX_MAX_FRAMES`` u32 max packets, normal Tx 1095 ``ETHTOOL_A_COALESCE_TX_USECS_IRQ`` u32 delay (us), Tx in IRQ 1096 ``ETHTOOL_A_COALESCE_TX_MAX_FRAMES_IRQ`` u32 IRQ packets, Tx in IRQ 1097 ``ETHTOOL_A_COALESCE_STATS_BLOCK_USECS`` u32 delay of stats update 1098 ``ETHTOOL_A_COALESCE_USE_ADAPTIVE_RX`` bool adaptive Rx coalesce 1099 ``ETHTOOL_A_COALESCE_USE_ADAPTIVE_TX`` bool adaptive Tx coalesce 1100 ``ETHTOOL_A_COALESCE_PKT_RATE_LOW`` u32 threshold for low rate 1101 ``ETHTOOL_A_COALESCE_RX_USECS_LOW`` u32 delay (us), low Rx 1102 ``ETHTOOL_A_COALESCE_RX_MAX_FRAMES_LOW`` u32 max packets, low Rx 1103 ``ETHTOOL_A_COALESCE_TX_USECS_LOW`` u32 delay (us), low Tx 1104 ``ETHTOOL_A_COALESCE_TX_MAX_FRAMES_LOW`` u32 max packets, low Tx 1105 ``ETHTOOL_A_COALESCE_PKT_RATE_HIGH`` u32 threshold for high rate 1106 ``ETHTOOL_A_COALESCE_RX_USECS_HIGH`` u32 delay (us), high Rx 1107 ``ETHTOOL_A_COALESCE_RX_MAX_FRAMES_HIGH`` u32 max packets, high Rx 1108 ``ETHTOOL_A_COALESCE_TX_USECS_HIGH`` u32 delay (us), high Tx 1109 ``ETHTOOL_A_COALESCE_TX_MAX_FRAMES_HIGH`` u32 max packets, high Tx 1110 ``ETHTOOL_A_COALESCE_RATE_SAMPLE_INTERVAL`` u32 rate sampling interval 1111 ``ETHTOOL_A_COALESCE_USE_CQE_TX`` bool timer reset mode, Tx 1112 ``ETHTOOL_A_COALESCE_USE_CQE_RX`` bool timer reset mode, Rx 1113 ``ETHTOOL_A_COALESCE_TX_AGGR_MAX_BYTES`` u32 max aggr size, Tx 1114 ``ETHTOOL_A_COALESCE_TX_AGGR_MAX_FRAMES`` u32 max aggr packets, Tx 1115 ``ETHTOOL_A_COALESCE_TX_AGGR_TIME_USECS`` u32 time (us), aggr, Tx 1116 ``ETHTOOL_A_COALESCE_RX_PROFILE`` nested profile of DIM, Rx 1117 ``ETHTOOL_A_COALESCE_TX_PROFILE`` nested profile of DIM, Tx 1118 =========================================== ====== ======================= 1119 1120Request is rejected if it attributes declared as unsupported by driver (i.e. 1121such that the corresponding bit in ``ethtool_ops::supported_coalesce_params`` 1122is not set), regardless of their values. Driver may impose additional 1123constraints on coalescing parameters and their values. 1124 1125Compared to requests issued via the ``ioctl()`` netlink version of this request 1126will try harder to make sure that values specified by the user have been applied 1127and may call the driver twice. 1128 1129 1130PAUSE_GET 1131========= 1132 1133Gets pause frame settings like ``ETHTOOL_GPAUSEPARAM`` ioctl request. 1134 1135Request contents: 1136 1137 ===================================== ====== ========================== 1138 ``ETHTOOL_A_PAUSE_HEADER`` nested request header 1139 ``ETHTOOL_A_PAUSE_STATS_SRC`` u32 source of statistics 1140 ===================================== ====== ========================== 1141 1142``ETHTOOL_A_PAUSE_STATS_SRC`` is optional. It takes values from: 1143 1144.. kernel-doc:: include/uapi/linux/ethtool.h 1145 :identifiers: ethtool_mac_stats_src 1146 1147If absent from the request, stats will be provided with 1148an ``ETHTOOL_A_PAUSE_STATS_SRC`` attribute in the response equal to 1149``ETHTOOL_MAC_STATS_SRC_AGGREGATE``. 1150 1151Kernel response contents: 1152 1153 ===================================== ====== ========================== 1154 ``ETHTOOL_A_PAUSE_HEADER`` nested request header 1155 ``ETHTOOL_A_PAUSE_AUTONEG`` bool pause autonegotiation 1156 ``ETHTOOL_A_PAUSE_RX`` bool receive pause frames 1157 ``ETHTOOL_A_PAUSE_TX`` bool transmit pause frames 1158 ``ETHTOOL_A_PAUSE_STATS`` nested pause statistics 1159 ===================================== ====== ========================== 1160 1161``ETHTOOL_A_PAUSE_STATS`` are reported if ``ETHTOOL_FLAG_STATS`` was set 1162in ``ETHTOOL_A_HEADER_FLAGS``. 1163It will be empty if driver did not report any statistics. Drivers fill in 1164the statistics in the following structure: 1165 1166.. kernel-doc:: include/linux/ethtool.h 1167 :identifiers: ethtool_pause_stats 1168 1169Each member has a corresponding attribute defined. 1170 1171PAUSE_SET 1172========= 1173 1174Sets pause parameters like ``ETHTOOL_GPAUSEPARAM`` ioctl request. 1175 1176Request contents: 1177 1178 ===================================== ====== ========================== 1179 ``ETHTOOL_A_PAUSE_HEADER`` nested request header 1180 ``ETHTOOL_A_PAUSE_AUTONEG`` bool pause autonegotiation 1181 ``ETHTOOL_A_PAUSE_RX`` bool receive pause frames 1182 ``ETHTOOL_A_PAUSE_TX`` bool transmit pause frames 1183 ===================================== ====== ========================== 1184 1185 1186EEE_GET 1187======= 1188 1189Gets Energy Efficient Ethernet settings like ``ETHTOOL_GEEE`` ioctl request. 1190 1191Request contents: 1192 1193 ===================================== ====== ========================== 1194 ``ETHTOOL_A_EEE_HEADER`` nested request header 1195 ===================================== ====== ========================== 1196 1197Kernel response contents: 1198 1199 ===================================== ====== ========================== 1200 ``ETHTOOL_A_EEE_HEADER`` nested request header 1201 ``ETHTOOL_A_EEE_MODES_OURS`` bool supported/advertised modes 1202 ``ETHTOOL_A_EEE_MODES_PEER`` bool peer advertised link modes 1203 ``ETHTOOL_A_EEE_ACTIVE`` bool EEE is actively used 1204 ``ETHTOOL_A_EEE_ENABLED`` bool EEE is enabled 1205 ``ETHTOOL_A_EEE_TX_LPI_ENABLED`` bool Tx lpi enabled 1206 ``ETHTOOL_A_EEE_TX_LPI_TIMER`` u32 Tx lpi timeout (in us) 1207 ===================================== ====== ========================== 1208 1209In ``ETHTOOL_A_EEE_MODES_OURS``, mask consists of link modes for which EEE is 1210enabled, value of link modes for which EEE is advertised. Link modes for which 1211peer advertises EEE are listed in ``ETHTOOL_A_EEE_MODES_PEER`` (no mask). The 1212netlink interface allows reporting EEE status for all link modes but only 1213first 32 are provided by the ``ethtool_ops`` callback. 1214 1215 1216EEE_SET 1217======= 1218 1219Sets Energy Efficient Ethernet parameters like ``ETHTOOL_SEEE`` ioctl request. 1220 1221Request contents: 1222 1223 ===================================== ====== ========================== 1224 ``ETHTOOL_A_EEE_HEADER`` nested request header 1225 ``ETHTOOL_A_EEE_MODES_OURS`` bool advertised modes 1226 ``ETHTOOL_A_EEE_ENABLED`` bool EEE is enabled 1227 ``ETHTOOL_A_EEE_TX_LPI_ENABLED`` bool Tx lpi enabled 1228 ``ETHTOOL_A_EEE_TX_LPI_TIMER`` u32 Tx lpi timeout (in us) 1229 ===================================== ====== ========================== 1230 1231``ETHTOOL_A_EEE_MODES_OURS`` is used to either list link modes to advertise 1232EEE for (if there is no mask) or specify changes to the list (if there is 1233a mask). The netlink interface allows reporting EEE status for all link modes 1234but only first 32 can be set at the moment as that is what the ``ethtool_ops`` 1235callback supports. 1236 1237 1238TSINFO_GET 1239========== 1240 1241Gets timestamping information like ``ETHTOOL_GET_TS_INFO`` ioctl request. 1242 1243Request contents: 1244 1245 ===================================== ====== ========================== 1246 ``ETHTOOL_A_TSINFO_HEADER`` nested request header 1247 ===================================== ====== ========================== 1248 1249Kernel response contents: 1250 1251 ===================================== ====== ========================== 1252 ``ETHTOOL_A_TSINFO_HEADER`` nested request header 1253 ``ETHTOOL_A_TSINFO_TIMESTAMPING`` bitset SO_TIMESTAMPING flags 1254 ``ETHTOOL_A_TSINFO_TX_TYPES`` bitset supported Tx types 1255 ``ETHTOOL_A_TSINFO_RX_FILTERS`` bitset supported Rx filters 1256 ``ETHTOOL_A_TSINFO_PHC_INDEX`` u32 PTP hw clock index 1257 ``ETHTOOL_A_TSINFO_STATS`` nested HW timestamping statistics 1258 ===================================== ====== ========================== 1259 1260``ETHTOOL_A_TSINFO_PHC_INDEX`` is absent if there is no associated PHC (there 1261is no special value for this case). The bitset attributes are omitted if they 1262would be empty (no bit set). 1263 1264Additional hardware timestamping statistics response contents: 1265 1266 ===================================== ====== =================================== 1267 ``ETHTOOL_A_TS_STAT_TX_PKTS`` uint Packets with Tx HW timestamps 1268 ``ETHTOOL_A_TS_STAT_TX_LOST`` uint Tx HW timestamp not arrived count 1269 ``ETHTOOL_A_TS_STAT_TX_ERR`` uint HW error request Tx timestamp count 1270 ===================================== ====== =================================== 1271 1272CABLE_TEST 1273========== 1274 1275Start a cable test. 1276 1277Request contents: 1278 1279 ==================================== ====== ========================== 1280 ``ETHTOOL_A_CABLE_TEST_HEADER`` nested request header 1281 ==================================== ====== ========================== 1282 1283Notification contents: 1284 1285An Ethernet cable typically contains 1, 2 or 4 pairs. The length of 1286the pair can only be measured when there is a fault in the pair and 1287hence a reflection. Information about the fault may not be available, 1288depending on the specific hardware. Hence the contents of the notify 1289message are mostly optional. The attributes can be repeated an 1290arbitrary number of times, in an arbitrary order, for an arbitrary 1291number of pairs. 1292 1293The example shows the notification sent when the test is completed for 1294a T2 cable, i.e. two pairs. One pair is OK and hence has no length 1295information. The second pair has a fault and does have length 1296information. 1297 1298 +---------------------------------------------+--------+---------------------+ 1299 | ``ETHTOOL_A_CABLE_TEST_HEADER`` | nested | reply header | 1300 +---------------------------------------------+--------+---------------------+ 1301 | ``ETHTOOL_A_CABLE_TEST_STATUS`` | u8 | completed | 1302 +---------------------------------------------+--------+---------------------+ 1303 | ``ETHTOOL_A_CABLE_TEST_NTF_NEST`` | nested | all the results | 1304 +-+-------------------------------------------+--------+---------------------+ 1305 | | ``ETHTOOL_A_CABLE_NEST_RESULT`` | nested | cable test result | 1306 +-+-+-----------------------------------------+--------+---------------------+ 1307 | | | ``ETHTOOL_A_CABLE_RESULTS_PAIR`` | u8 | pair number | 1308 +-+-+-----------------------------------------+--------+---------------------+ 1309 | | | ``ETHTOOL_A_CABLE_RESULTS_CODE`` | u8 | result code | 1310 +-+-+-----------------------------------------+--------+---------------------+ 1311 | | ``ETHTOOL_A_CABLE_NEST_RESULT`` | nested | cable test results | 1312 +-+-+-----------------------------------------+--------+---------------------+ 1313 | | | ``ETHTOOL_A_CABLE_RESULTS_PAIR`` | u8 | pair number | 1314 +-+-+-----------------------------------------+--------+---------------------+ 1315 | | | ``ETHTOOL_A_CABLE_RESULTS_CODE`` | u8 | result code | 1316 +-+-+-----------------------------------------+--------+---------------------+ 1317 | | | ``ETHTOOL_A_CABLE_RESULT_SRC`` | u32 | information source | 1318 +-+-+-----------------------------------------+--------+---------------------+ 1319 | | ``ETHTOOL_A_CABLE_NEST_FAULT_LENGTH`` | nested | cable length | 1320 +-+-+-----------------------------------------+--------+---------------------+ 1321 | | | ``ETHTOOL_A_CABLE_FAULT_LENGTH_PAIR`` | u8 | pair number | 1322 +-+-+-----------------------------------------+--------+---------------------+ 1323 | | | ``ETHTOOL_A_CABLE_FAULT_LENGTH_CM`` | u32 | length in cm | 1324 +-+-+-----------------------------------------+--------+---------------------+ 1325 | | | ``ETHTOOL_A_CABLE_FAULT_LENGTH_SRC`` | u32 | information source | 1326 +-+-+-----------------------------------------+--------+---------------------+ 1327 1328 1329CABLE_TEST TDR 1330============== 1331 1332Start a cable test and report raw TDR data 1333 1334Request contents: 1335 1336 +--------------------------------------------+--------+-----------------------+ 1337 | ``ETHTOOL_A_CABLE_TEST_TDR_HEADER`` | nested | reply header | 1338 +--------------------------------------------+--------+-----------------------+ 1339 | ``ETHTOOL_A_CABLE_TEST_TDR_CFG`` | nested | test configuration | 1340 +-+------------------------------------------+--------+-----------------------+ 1341 | | ``ETHTOOL_A_CABLE_STEP_FIRST_DISTANCE`` | u32 | first data distance | 1342 +-+-+----------------------------------------+--------+-----------------------+ 1343 | | ``ETHTOOL_A_CABLE_STEP_LAST_DISTANCE`` | u32 | last data distance | 1344 +-+-+----------------------------------------+--------+-----------------------+ 1345 | | ``ETHTOOL_A_CABLE_STEP_STEP_DISTANCE`` | u32 | distance of each step | 1346 +-+-+----------------------------------------+--------+-----------------------+ 1347 | | ``ETHTOOL_A_CABLE_TEST_TDR_CFG_PAIR`` | u8 | pair to test | 1348 +-+-+----------------------------------------+--------+-----------------------+ 1349 1350The ETHTOOL_A_CABLE_TEST_TDR_CFG is optional, as well as all members 1351of the nest. All distances are expressed in centimeters. The PHY takes 1352the distances as a guide, and rounds to the nearest distance it 1353actually supports. If a pair is passed, only that one pair will be 1354tested. Otherwise all pairs are tested. 1355 1356Notification contents: 1357 1358Raw TDR data is gathered by sending a pulse down the cable and 1359recording the amplitude of the reflected pulse for a given distance. 1360 1361It can take a number of seconds to collect TDR data, especial if the 1362full 100 meters is probed at 1 meter intervals. When the test is 1363started a notification will be sent containing just 1364ETHTOOL_A_CABLE_TEST_TDR_STATUS with the value 1365ETHTOOL_A_CABLE_TEST_NTF_STATUS_STARTED. 1366 1367When the test has completed a second notification will be sent 1368containing ETHTOOL_A_CABLE_TEST_TDR_STATUS with the value 1369ETHTOOL_A_CABLE_TEST_NTF_STATUS_COMPLETED and the TDR data. 1370 1371The message may optionally contain the amplitude of the pulse send 1372down the cable. This is measured in mV. A reflection should not be 1373bigger than transmitted pulse. 1374 1375Before the raw TDR data should be an ETHTOOL_A_CABLE_TDR_NEST_STEP 1376nest containing information about the distance along the cable for the 1377first reading, the last reading, and the step between each 1378reading. Distances are measured in centimeters. These should be the 1379exact values the PHY used. These may be different to what the user 1380requested, if the native measurement resolution is greater than 1 cm. 1381 1382For each step along the cable, a ETHTOOL_A_CABLE_TDR_NEST_AMPLITUDE is 1383used to report the amplitude of the reflection for a given pair. 1384 1385 +---------------------------------------------+--------+----------------------+ 1386 | ``ETHTOOL_A_CABLE_TEST_TDR_HEADER`` | nested | reply header | 1387 +---------------------------------------------+--------+----------------------+ 1388 | ``ETHTOOL_A_CABLE_TEST_TDR_STATUS`` | u8 | completed | 1389 +---------------------------------------------+--------+----------------------+ 1390 | ``ETHTOOL_A_CABLE_TEST_TDR_NTF_NEST`` | nested | all the results | 1391 +-+-------------------------------------------+--------+----------------------+ 1392 | | ``ETHTOOL_A_CABLE_TDR_NEST_PULSE`` | nested | TX Pulse amplitude | 1393 +-+-+-----------------------------------------+--------+----------------------+ 1394 | | | ``ETHTOOL_A_CABLE_PULSE_mV`` | s16 | Pulse amplitude | 1395 +-+-+-----------------------------------------+--------+----------------------+ 1396 | | ``ETHTOOL_A_CABLE_NEST_STEP`` | nested | TDR step info | 1397 +-+-+-----------------------------------------+--------+----------------------+ 1398 | | | ``ETHTOOL_A_CABLE_STEP_FIRST_DISTANCE`` | u32 | First data distance | 1399 +-+-+-----------------------------------------+--------+----------------------+ 1400 | | | ``ETHTOOL_A_CABLE_STEP_LAST_DISTANCE`` | u32 | Last data distance | 1401 +-+-+-----------------------------------------+--------+----------------------+ 1402 | | | ``ETHTOOL_A_CABLE_STEP_STEP_DISTANCE`` | u32 | distance of each step| 1403 +-+-+-----------------------------------------+--------+----------------------+ 1404 | | ``ETHTOOL_A_CABLE_TDR_NEST_AMPLITUDE`` | nested | Reflection amplitude | 1405 +-+-+-----------------------------------------+--------+----------------------+ 1406 | | | ``ETHTOOL_A_CABLE_RESULTS_PAIR`` | u8 | pair number | 1407 +-+-+-----------------------------------------+--------+----------------------+ 1408 | | | ``ETHTOOL_A_CABLE_AMPLITUDE_mV`` | s16 | Reflection amplitude | 1409 +-+-+-----------------------------------------+--------+----------------------+ 1410 | | ``ETHTOOL_A_CABLE_TDR_NEST_AMPLITUDE`` | nested | Reflection amplitude | 1411 +-+-+-----------------------------------------+--------+----------------------+ 1412 | | | ``ETHTOOL_A_CABLE_RESULTS_PAIR`` | u8 | pair number | 1413 +-+-+-----------------------------------------+--------+----------------------+ 1414 | | | ``ETHTOOL_A_CABLE_AMPLITUDE_mV`` | s16 | Reflection amplitude | 1415 +-+-+-----------------------------------------+--------+----------------------+ 1416 | | ``ETHTOOL_A_CABLE_TDR_NEST_AMPLITUDE`` | nested | Reflection amplitude | 1417 +-+-+-----------------------------------------+--------+----------------------+ 1418 | | | ``ETHTOOL_A_CABLE_RESULTS_PAIR`` | u8 | pair number | 1419 +-+-+-----------------------------------------+--------+----------------------+ 1420 | | | ``ETHTOOL_A_CABLE_AMPLITUDE_mV`` | s16 | Reflection amplitude | 1421 +-+-+-----------------------------------------+--------+----------------------+ 1422 1423TUNNEL_INFO 1424=========== 1425 1426Gets information about the tunnel state NIC is aware of. 1427 1428Request contents: 1429 1430 ===================================== ====== ========================== 1431 ``ETHTOOL_A_TUNNEL_INFO_HEADER`` nested request header 1432 ===================================== ====== ========================== 1433 1434Kernel response contents: 1435 1436 +---------------------------------------------+--------+---------------------+ 1437 | ``ETHTOOL_A_TUNNEL_INFO_HEADER`` | nested | reply header | 1438 +---------------------------------------------+--------+---------------------+ 1439 | ``ETHTOOL_A_TUNNEL_INFO_UDP_PORTS`` | nested | all UDP port tables | 1440 +-+-------------------------------------------+--------+---------------------+ 1441 | | ``ETHTOOL_A_TUNNEL_UDP_TABLE`` | nested | one UDP port table | 1442 +-+-+-----------------------------------------+--------+---------------------+ 1443 | | | ``ETHTOOL_A_TUNNEL_UDP_TABLE_SIZE`` | u32 | max size of the | 1444 | | | | | table | 1445 +-+-+-----------------------------------------+--------+---------------------+ 1446 | | | ``ETHTOOL_A_TUNNEL_UDP_TABLE_TYPES`` | bitset | tunnel types which | 1447 | | | | | table can hold | 1448 +-+-+-----------------------------------------+--------+---------------------+ 1449 | | | ``ETHTOOL_A_TUNNEL_UDP_TABLE_ENTRY`` | nested | offloaded UDP port | 1450 +-+-+-+---------------------------------------+--------+---------------------+ 1451 | | | | ``ETHTOOL_A_TUNNEL_UDP_ENTRY_PORT`` | be16 | UDP port | 1452 +-+-+-+---------------------------------------+--------+---------------------+ 1453 | | | | ``ETHTOOL_A_TUNNEL_UDP_ENTRY_TYPE`` | u32 | tunnel type | 1454 +-+-+-+---------------------------------------+--------+---------------------+ 1455 1456For UDP tunnel table empty ``ETHTOOL_A_TUNNEL_UDP_TABLE_TYPES`` indicates that 1457the table contains static entries, hard-coded by the NIC. 1458 1459FEC_GET 1460======= 1461 1462Gets FEC configuration and state like ``ETHTOOL_GFECPARAM`` ioctl request. 1463 1464Request contents: 1465 1466 ===================================== ====== ========================== 1467 ``ETHTOOL_A_FEC_HEADER`` nested request header 1468 ===================================== ====== ========================== 1469 1470Kernel response contents: 1471 1472 ===================================== ====== ========================== 1473 ``ETHTOOL_A_FEC_HEADER`` nested request header 1474 ``ETHTOOL_A_FEC_MODES`` bitset configured modes 1475 ``ETHTOOL_A_FEC_AUTO`` bool FEC mode auto selection 1476 ``ETHTOOL_A_FEC_ACTIVE`` u32 index of active FEC mode 1477 ``ETHTOOL_A_FEC_STATS`` nested FEC statistics 1478 ===================================== ====== ========================== 1479 1480``ETHTOOL_A_FEC_ACTIVE`` is the bit index of the FEC link mode currently 1481active on the interface. This attribute may not be present if device does 1482not support FEC. 1483 1484``ETHTOOL_A_FEC_MODES`` and ``ETHTOOL_A_FEC_AUTO`` are only meaningful when 1485autonegotiation is disabled. If ``ETHTOOL_A_FEC_AUTO`` is non-zero driver will 1486select the FEC mode automatically based on the parameters of the SFP module. 1487This is equivalent to the ``ETHTOOL_FEC_AUTO`` bit of the ioctl interface. 1488``ETHTOOL_A_FEC_MODES`` carry the current FEC configuration using link mode 1489bits (rather than old ``ETHTOOL_FEC_*`` bits). 1490 1491``ETHTOOL_A_FEC_STATS`` are reported if ``ETHTOOL_FLAG_STATS`` was set in 1492``ETHTOOL_A_HEADER_FLAGS``. 1493Each attribute carries an array of 64bit statistics. First entry in the array 1494contains the total number of events on the port, while the following entries 1495are counters corresponding to lanes/PCS instances. The number of entries in 1496the array will be: 1497 1498+--------------+---------------------------------------------+ 1499| `0` | device does not support FEC statistics | 1500+--------------+---------------------------------------------+ 1501| `1` | device does not support per-lane break down | 1502+--------------+---------------------------------------------+ 1503| `1 + #lanes` | device has full support for FEC stats | 1504+--------------+---------------------------------------------+ 1505 1506Drivers fill in the statistics in the following structure: 1507 1508.. kernel-doc:: include/linux/ethtool.h 1509 :identifiers: ethtool_fec_stats 1510 1511FEC_SET 1512======= 1513 1514Sets FEC parameters like ``ETHTOOL_SFECPARAM`` ioctl request. 1515 1516Request contents: 1517 1518 ===================================== ====== ========================== 1519 ``ETHTOOL_A_FEC_HEADER`` nested request header 1520 ``ETHTOOL_A_FEC_MODES`` bitset configured modes 1521 ``ETHTOOL_A_FEC_AUTO`` bool FEC mode auto selection 1522 ===================================== ====== ========================== 1523 1524``FEC_SET`` is only meaningful when autonegotiation is disabled. Otherwise 1525FEC mode is selected as part of autonegotiation. 1526 1527``ETHTOOL_A_FEC_MODES`` selects which FEC mode should be used. It's recommended 1528to set only one bit, if multiple bits are set driver may choose between them 1529in an implementation specific way. 1530 1531``ETHTOOL_A_FEC_AUTO`` requests the driver to choose FEC mode based on SFP 1532module parameters. This does not mean autonegotiation. 1533 1534MODULE_EEPROM_GET 1535================= 1536 1537Fetch module EEPROM data dump. 1538This interface is designed to allow dumps of at most 1/2 page at once. This 1539means only dumps of 128 (or less) bytes are allowed, without crossing half page 1540boundary located at offset 128. For pages other than 0 only high 128 bytes are 1541accessible. 1542 1543Request contents: 1544 1545 ======================================= ====== ========================== 1546 ``ETHTOOL_A_MODULE_EEPROM_HEADER`` nested request header 1547 ``ETHTOOL_A_MODULE_EEPROM_OFFSET`` u32 offset within a page 1548 ``ETHTOOL_A_MODULE_EEPROM_LENGTH`` u32 amount of bytes to read 1549 ``ETHTOOL_A_MODULE_EEPROM_PAGE`` u8 page number 1550 ``ETHTOOL_A_MODULE_EEPROM_BANK`` u8 bank number 1551 ``ETHTOOL_A_MODULE_EEPROM_I2C_ADDRESS`` u8 page I2C address 1552 ======================================= ====== ========================== 1553 1554If ``ETHTOOL_A_MODULE_EEPROM_BANK`` is not specified, bank 0 is assumed. 1555 1556Kernel response contents: 1557 1558 +---------------------------------------------+--------+---------------------+ 1559 | ``ETHTOOL_A_MODULE_EEPROM_HEADER`` | nested | reply header | 1560 +---------------------------------------------+--------+---------------------+ 1561 | ``ETHTOOL_A_MODULE_EEPROM_DATA`` | binary | array of bytes from | 1562 | | | module EEPROM | 1563 +---------------------------------------------+--------+---------------------+ 1564 1565``ETHTOOL_A_MODULE_EEPROM_DATA`` has an attribute length equal to the amount of 1566bytes driver actually read. 1567 1568STATS_GET 1569========= 1570 1571Get standard statistics for the interface. Note that this is not 1572a re-implementation of ``ETHTOOL_GSTATS`` which exposed driver-defined 1573stats. 1574 1575Request contents: 1576 1577 ======================================= ====== ========================== 1578 ``ETHTOOL_A_STATS_HEADER`` nested request header 1579 ``ETHTOOL_A_STATS_SRC`` u32 source of statistics 1580 ``ETHTOOL_A_STATS_GROUPS`` bitset requested groups of stats 1581 ======================================= ====== ========================== 1582 1583Kernel response contents: 1584 1585 +-----------------------------------+--------+--------------------------------+ 1586 | ``ETHTOOL_A_STATS_HEADER`` | nested | reply header | 1587 +-----------------------------------+--------+--------------------------------+ 1588 | ``ETHTOOL_A_STATS_SRC`` | u32 | source of statistics | 1589 +-----------------------------------+--------+--------------------------------+ 1590 | ``ETHTOOL_A_STATS_GRP`` | nested | one or more group of stats | 1591 +-+---------------------------------+--------+--------------------------------+ 1592 | | ``ETHTOOL_A_STATS_GRP_ID`` | u32 | group ID - ``ETHTOOL_STATS_*`` | 1593 +-+---------------------------------+--------+--------------------------------+ 1594 | | ``ETHTOOL_A_STATS_GRP_SS_ID`` | u32 | string set ID for names | 1595 +-+---------------------------------+--------+--------------------------------+ 1596 | | ``ETHTOOL_A_STATS_GRP_STAT`` | nested | nest containing a statistic | 1597 +-+---------------------------------+--------+--------------------------------+ 1598 | | ``ETHTOOL_A_STATS_GRP_HIST_RX`` | nested | histogram statistic (Rx) | 1599 +-+---------------------------------+--------+--------------------------------+ 1600 | | ``ETHTOOL_A_STATS_GRP_HIST_TX`` | nested | histogram statistic (Tx) | 1601 +-+---------------------------------+--------+--------------------------------+ 1602 1603Users specify which groups of statistics they are requesting via 1604the ``ETHTOOL_A_STATS_GROUPS`` bitset. Currently defined values are: 1605 1606 ====================== ======== =============================================== 1607 ETHTOOL_STATS_ETH_MAC eth-mac Basic IEEE 802.3 MAC statistics (30.3.1.1.*) 1608 ETHTOOL_STATS_ETH_PHY eth-phy Basic IEEE 802.3 PHY statistics (30.3.2.1.*) 1609 ETHTOOL_STATS_ETH_CTRL eth-ctrl Basic IEEE 802.3 MAC Ctrl statistics (30.3.3.*) 1610 ETHTOOL_STATS_RMON rmon RMON (RFC 2819) statistics 1611 ====================== ======== =============================================== 1612 1613Each group should have a corresponding ``ETHTOOL_A_STATS_GRP`` in the reply. 1614``ETHTOOL_A_STATS_GRP_ID`` identifies which group's statistics nest contains. 1615``ETHTOOL_A_STATS_GRP_SS_ID`` identifies the string set ID for the names of 1616the statistics in the group, if available. 1617 1618Statistics are added to the ``ETHTOOL_A_STATS_GRP`` nest under 1619``ETHTOOL_A_STATS_GRP_STAT``. ``ETHTOOL_A_STATS_GRP_STAT`` should contain 1620single 8 byte (u64) attribute inside - the type of that attribute is 1621the statistic ID and the value is the value of the statistic. 1622Each group has its own interpretation of statistic IDs. 1623Attribute IDs correspond to strings from the string set identified 1624by ``ETHTOOL_A_STATS_GRP_SS_ID``. Complex statistics (such as RMON histogram 1625entries) are also listed inside ``ETHTOOL_A_STATS_GRP`` and do not have 1626a string defined in the string set. 1627 1628RMON "histogram" counters count number of packets within given size range. 1629Because RFC does not specify the ranges beyond the standard 1518 MTU devices 1630differ in definition of buckets. For this reason the definition of packet ranges 1631is left to each driver. 1632 1633``ETHTOOL_A_STATS_GRP_HIST_RX`` and ``ETHTOOL_A_STATS_GRP_HIST_TX`` nests 1634contain the following attributes: 1635 1636 ================================= ====== =================================== 1637 ETHTOOL_A_STATS_RMON_HIST_BKT_LOW u32 low bound of the packet size bucket 1638 ETHTOOL_A_STATS_RMON_HIST_BKT_HI u32 high bound of the bucket 1639 ETHTOOL_A_STATS_RMON_HIST_VAL u64 packet counter 1640 ================================= ====== =================================== 1641 1642Low and high bounds are inclusive, for example: 1643 1644 ============================= ==== ==== 1645 RFC statistic low high 1646 ============================= ==== ==== 1647 etherStatsPkts64Octets 0 64 1648 etherStatsPkts512to1023Octets 512 1023 1649 ============================= ==== ==== 1650 1651``ETHTOOL_A_STATS_SRC`` is optional. Similar to ``PAUSE_GET``, it takes values 1652from ``enum ethtool_mac_stats_src``. If absent from the request, stats will be 1653provided with an ``ETHTOOL_A_STATS_SRC`` attribute in the response equal to 1654``ETHTOOL_MAC_STATS_SRC_AGGREGATE``. 1655 1656PHC_VCLOCKS_GET 1657=============== 1658 1659Query device PHC virtual clocks information. 1660 1661Request contents: 1662 1663 ==================================== ====== ========================== 1664 ``ETHTOOL_A_PHC_VCLOCKS_HEADER`` nested request header 1665 ==================================== ====== ========================== 1666 1667Kernel response contents: 1668 1669 ==================================== ====== ========================== 1670 ``ETHTOOL_A_PHC_VCLOCKS_HEADER`` nested reply header 1671 ``ETHTOOL_A_PHC_VCLOCKS_NUM`` u32 PHC virtual clocks number 1672 ``ETHTOOL_A_PHC_VCLOCKS_INDEX`` s32 PHC index array 1673 ==================================== ====== ========================== 1674 1675MODULE_GET 1676========== 1677 1678Gets transceiver module parameters. 1679 1680Request contents: 1681 1682 ===================================== ====== ========================== 1683 ``ETHTOOL_A_MODULE_HEADER`` nested request header 1684 ===================================== ====== ========================== 1685 1686Kernel response contents: 1687 1688 ====================================== ====== ========================== 1689 ``ETHTOOL_A_MODULE_HEADER`` nested reply header 1690 ``ETHTOOL_A_MODULE_POWER_MODE_POLICY`` u8 power mode policy 1691 ``ETHTOOL_A_MODULE_POWER_MODE`` u8 operational power mode 1692 ====================================== ====== ========================== 1693 1694The optional ``ETHTOOL_A_MODULE_POWER_MODE_POLICY`` attribute encodes the 1695transceiver module power mode policy enforced by the host. The default policy 1696is driver-dependent, but "auto" is the recommended default and it should be 1697implemented by new drivers and drivers where conformance to a legacy behavior 1698is not critical. 1699 1700The optional ``ETHTHOOL_A_MODULE_POWER_MODE`` attribute encodes the operational 1701power mode policy of the transceiver module. It is only reported when a module 1702is plugged-in. Possible values are: 1703 1704.. kernel-doc:: include/uapi/linux/ethtool.h 1705 :identifiers: ethtool_module_power_mode 1706 1707MODULE_SET 1708========== 1709 1710Sets transceiver module parameters. 1711 1712Request contents: 1713 1714 ====================================== ====== ========================== 1715 ``ETHTOOL_A_MODULE_HEADER`` nested request header 1716 ``ETHTOOL_A_MODULE_POWER_MODE_POLICY`` u8 power mode policy 1717 ====================================== ====== ========================== 1718 1719When set, the optional ``ETHTOOL_A_MODULE_POWER_MODE_POLICY`` attribute is used 1720to set the transceiver module power policy enforced by the host. Possible 1721values are: 1722 1723.. kernel-doc:: include/uapi/linux/ethtool.h 1724 :identifiers: ethtool_module_power_mode_policy 1725 1726For SFF-8636 modules, low power mode is forced by the host according to table 17276-10 in revision 2.10a of the specification. 1728 1729For CMIS modules, low power mode is forced by the host according to table 6-12 1730in revision 5.0 of the specification. 1731 1732PSE_GET 1733======= 1734 1735Gets PSE attributes. 1736 1737Request contents: 1738 1739 ===================================== ====== ========================== 1740 ``ETHTOOL_A_PSE_HEADER`` nested request header 1741 ===================================== ====== ========================== 1742 1743Kernel response contents: 1744 1745 ========================================== ====== ============================= 1746 ``ETHTOOL_A_PSE_HEADER`` nested reply header 1747 ``ETHTOOL_A_PODL_PSE_ADMIN_STATE`` u32 Operational state of the PoDL 1748 PSE functions 1749 ``ETHTOOL_A_PODL_PSE_PW_D_STATUS`` u32 power detection status of the 1750 PoDL PSE. 1751 ``ETHTOOL_A_C33_PSE_ADMIN_STATE`` u32 Operational state of the PoE 1752 PSE functions. 1753 ``ETHTOOL_A_C33_PSE_PW_D_STATUS`` u32 power detection status of the 1754 PoE PSE. 1755 ``ETHTOOL_A_C33_PSE_PW_CLASS`` u32 power class of the PoE PSE. 1756 ``ETHTOOL_A_C33_PSE_ACTUAL_PW`` u32 actual power drawn on the 1757 PoE PSE. 1758 ``ETHTOOL_A_C33_PSE_EXT_STATE`` u32 power extended state of the 1759 PoE PSE. 1760 ``ETHTOOL_A_C33_PSE_EXT_SUBSTATE`` u32 power extended substatus of 1761 the PoE PSE. 1762 ``ETHTOOL_A_C33_PSE_AVAIL_PW_LIMIT`` u32 currently configured power 1763 limit of the PoE PSE. 1764 ``ETHTOOL_A_C33_PSE_PW_LIMIT_RANGES`` nested Supported power limit 1765 configuration ranges. 1766 ========================================== ====== ============================= 1767 1768When set, the optional ``ETHTOOL_A_PODL_PSE_ADMIN_STATE`` attribute identifies 1769the operational state of the PoDL PSE functions. The operational state of the 1770PSE function can be changed using the ``ETHTOOL_A_PODL_PSE_ADMIN_CONTROL`` 1771action. This option is corresponding to ``IEEE 802.3-2018`` 30.15.1.1.2 1772aPoDLPSEAdminState. Possible values are: 1773 1774.. kernel-doc:: include/uapi/linux/ethtool.h 1775 :identifiers: ethtool_podl_pse_admin_state 1776 1777The same goes for ``ETHTOOL_A_C33_PSE_ADMIN_STATE`` implementing 1778``IEEE 802.3-2022`` 30.9.1.1.2 aPSEAdminState. 1779 1780.. kernel-doc:: include/uapi/linux/ethtool.h 1781 :identifiers: ethtool_c33_pse_admin_state 1782 1783When set, the optional ``ETHTOOL_A_PODL_PSE_PW_D_STATUS`` attribute identifies 1784the power detection status of the PoDL PSE. The status depend on internal PSE 1785state machine and automatic PD classification support. This option is 1786corresponding to ``IEEE 802.3-2018`` 30.15.1.1.3 aPoDLPSEPowerDetectionStatus. 1787Possible values are: 1788 1789.. kernel-doc:: include/uapi/linux/ethtool.h 1790 :identifiers: ethtool_podl_pse_pw_d_status 1791 1792The same goes for ``ETHTOOL_A_C33_PSE_ADMIN_PW_D_STATUS`` implementing 1793``IEEE 802.3-2022`` 30.9.1.1.5 aPSEPowerDetectionStatus. 1794 1795.. kernel-doc:: include/uapi/linux/ethtool.h 1796 :identifiers: ethtool_c33_pse_pw_d_status 1797 1798When set, the optional ``ETHTOOL_A_C33_PSE_PW_CLASS`` attribute identifies 1799the power class of the C33 PSE. It depends on the class negotiated between 1800the PSE and the PD. This option is corresponding to ``IEEE 802.3-2022`` 180130.9.1.1.8 aPSEPowerClassification. 1802 1803When set, the optional ``ETHTOOL_A_C33_PSE_ACTUAL_PW`` attribute identifies 1804This option is corresponding to ``IEEE 802.3-2022`` 30.9.1.1.23 aPSEActualPower. 1805Actual power is reported in mW. 1806 1807When set, the optional ``ETHTOOL_A_C33_PSE_EXT_STATE`` attribute identifies 1808the extended error state of the C33 PSE. Possible values are: 1809 1810.. kernel-doc:: include/uapi/linux/ethtool.h 1811 :identifiers: ethtool_c33_pse_ext_state 1812 1813When set, the optional ``ETHTOOL_A_C33_PSE_EXT_SUBSTATE`` attribute identifies 1814the extended error state of the C33 PSE. Possible values are: 1815Possible values are: 1816 1817.. kernel-doc:: include/uapi/linux/ethtool.h 1818 :identifiers: ethtool_c33_pse_ext_substate_class_num_events 1819 ethtool_c33_pse_ext_substate_error_condition 1820 ethtool_c33_pse_ext_substate_mr_pse_enable 1821 ethtool_c33_pse_ext_substate_option_detect_ted 1822 ethtool_c33_pse_ext_substate_option_vport_lim 1823 ethtool_c33_pse_ext_substate_ovld_detected 1824 ethtool_c33_pse_ext_substate_pd_dll_power_type 1825 ethtool_c33_pse_ext_substate_power_not_available 1826 ethtool_c33_pse_ext_substate_short_detected 1827 1828When set, the optional ``ETHTOOL_A_C33_PSE_AVAIL_PW_LIMIT`` attribute 1829identifies the C33 PSE power limit in mW. 1830 1831When set the optional ``ETHTOOL_A_C33_PSE_PW_LIMIT_RANGES`` nested attribute 1832identifies the C33 PSE power limit ranges through 1833``ETHTOOL_A_C33_PSE_PWR_VAL_LIMIT_RANGE_MIN`` and 1834``ETHTOOL_A_C33_PSE_PWR_VAL_LIMIT_RANGE_MAX``. 1835If the controller works with fixed classes, the min and max values will be 1836equal. 1837 1838PSE_SET 1839======= 1840 1841Sets PSE parameters. 1842 1843Request contents: 1844 1845 ====================================== ====== ============================= 1846 ``ETHTOOL_A_PSE_HEADER`` nested request header 1847 ``ETHTOOL_A_PODL_PSE_ADMIN_CONTROL`` u32 Control PoDL PSE Admin state 1848 ``ETHTOOL_A_C33_PSE_ADMIN_CONTROL`` u32 Control PSE Admin state 1849 ``ETHTOOL_A_C33_PSE_AVAIL_PWR_LIMIT`` u32 Control PoE PSE available 1850 power limit 1851 ====================================== ====== ============================= 1852 1853When set, the optional ``ETHTOOL_A_PODL_PSE_ADMIN_CONTROL`` attribute is used 1854to control PoDL PSE Admin functions. This option is implementing 1855``IEEE 802.3-2018`` 30.15.1.2.1 acPoDLPSEAdminControl. See 1856``ETHTOOL_A_PODL_PSE_ADMIN_STATE`` for supported values. 1857 1858The same goes for ``ETHTOOL_A_C33_PSE_ADMIN_CONTROL`` implementing 1859``IEEE 802.3-2022`` 30.9.1.2.1 acPSEAdminControl. 1860 1861When set, the optional ``ETHTOOL_A_C33_PSE_AVAIL_PWR_LIMIT`` attribute is 1862used to control the available power value limit for C33 PSE in milliwatts. 1863This attribute corresponds to the `pse_available_power` variable described in 1864``IEEE 802.3-2022`` 33.2.4.4 Variables and `pse_avail_pwr` in 145.2.5.4 1865Variables, which are described in power classes. 1866 1867It was decided to use milliwatts for this interface to unify it with other 1868power monitoring interfaces, which also use milliwatts, and to align with 1869various existing products that document power consumption in watts rather than 1870classes. If power limit configuration based on classes is needed, the 1871conversion can be done in user space, for example by ethtool. 1872 1873RSS_GET 1874======= 1875 1876Get indirection table, hash key and hash function info associated with a 1877RSS context of an interface similar to ``ETHTOOL_GRSSH`` ioctl request. 1878 1879Request contents: 1880 1881===================================== ====== ============================ 1882 ``ETHTOOL_A_RSS_HEADER`` nested request header 1883 ``ETHTOOL_A_RSS_CONTEXT`` u32 context number 1884 ``ETHTOOL_A_RSS_START_CONTEXT`` u32 start context number (dumps) 1885===================================== ====== ============================ 1886 1887``ETHTOOL_A_RSS_CONTEXT`` specifies which RSS context number to query, 1888if not set context 0 (the main context) is queried. Dumps can be filtered 1889by device (only listing contexts of a given netdev). Filtering single 1890context number is not supported but ``ETHTOOL_A_RSS_START_CONTEXT`` 1891can be used to start dumping context from the given number (primarily 1892used to ignore context 0s and only dump additional contexts). 1893 1894Kernel response contents: 1895 1896===================================== ====== ========================== 1897 ``ETHTOOL_A_RSS_HEADER`` nested reply header 1898 ``ETHTOOL_A_RSS_CONTEXT`` u32 context number 1899 ``ETHTOOL_A_RSS_HFUNC`` u32 RSS hash func 1900 ``ETHTOOL_A_RSS_INDIR`` binary Indir table bytes 1901 ``ETHTOOL_A_RSS_HKEY`` binary Hash key bytes 1902 ``ETHTOOL_A_RSS_INPUT_XFRM`` u32 RSS input data transformation 1903===================================== ====== ========================== 1904 1905ETHTOOL_A_RSS_HFUNC attribute is bitmap indicating the hash function 1906being used. Current supported options are toeplitz, xor or crc32. 1907ETHTOOL_A_RSS_INDIR attribute returns RSS indirection table where each byte 1908indicates queue number. 1909ETHTOOL_A_RSS_INPUT_XFRM attribute is a bitmap indicating the type of 1910transformation applied to the input protocol fields before given to the RSS 1911hfunc. Current supported option is symmetric-xor. 1912 1913PLCA_GET_CFG 1914============ 1915 1916Gets the IEEE 802.3cg-2019 Clause 148 Physical Layer Collision Avoidance 1917(PLCA) Reconciliation Sublayer (RS) attributes. 1918 1919Request contents: 1920 1921 ===================================== ====== ========================== 1922 ``ETHTOOL_A_PLCA_HEADER`` nested request header 1923 ===================================== ====== ========================== 1924 1925Kernel response contents: 1926 1927 ====================================== ====== ============================= 1928 ``ETHTOOL_A_PLCA_HEADER`` nested reply header 1929 ``ETHTOOL_A_PLCA_VERSION`` u16 Supported PLCA management 1930 interface standard/version 1931 ``ETHTOOL_A_PLCA_ENABLED`` u8 PLCA Admin State 1932 ``ETHTOOL_A_PLCA_NODE_ID`` u32 PLCA unique local node ID 1933 ``ETHTOOL_A_PLCA_NODE_CNT`` u32 Number of PLCA nodes on the 1934 network, including the 1935 coordinator 1936 ``ETHTOOL_A_PLCA_TO_TMR`` u32 Transmit Opportunity Timer 1937 value in bit-times (BT) 1938 ``ETHTOOL_A_PLCA_BURST_CNT`` u32 Number of additional packets 1939 the node is allowed to send 1940 within a single TO 1941 ``ETHTOOL_A_PLCA_BURST_TMR`` u32 Time to wait for the MAC to 1942 transmit a new frame before 1943 terminating the burst 1944 ====================================== ====== ============================= 1945 1946When set, the optional ``ETHTOOL_A_PLCA_VERSION`` attribute indicates which 1947standard and version the PLCA management interface complies to. When not set, 1948the interface is vendor-specific and (possibly) supplied by the driver. 1949The OPEN Alliance SIG specifies a standard register map for 10BASE-T1S PHYs 1950embedding the PLCA Reconciliation Sublayer. See "10BASE-T1S PLCA Management 1951Registers" at https://www.opensig.org/about/specifications/. 1952 1953When set, the optional ``ETHTOOL_A_PLCA_ENABLED`` attribute indicates the 1954administrative state of the PLCA RS. When not set, the node operates in "plain" 1955CSMA/CD mode. This option is corresponding to ``IEEE 802.3cg-2019`` 30.16.1.1.1 1956aPLCAAdminState / 30.16.1.2.1 acPLCAAdminControl. 1957 1958When set, the optional ``ETHTOOL_A_PLCA_NODE_ID`` attribute indicates the 1959configured local node ID of the PHY. This ID determines which transmit 1960opportunity (TO) is reserved for the node to transmit into. This option is 1961corresponding to ``IEEE 802.3cg-2019`` 30.16.1.1.4 aPLCALocalNodeID. The valid 1962range for this attribute is [0 .. 255] where 255 means "not configured". 1963 1964When set, the optional ``ETHTOOL_A_PLCA_NODE_CNT`` attribute indicates the 1965configured maximum number of PLCA nodes on the mixing-segment. This number 1966determines the total number of transmit opportunities generated during a 1967PLCA cycle. This attribute is relevant only for the PLCA coordinator, which is 1968the node with aPLCALocalNodeID set to 0. Follower nodes ignore this setting. 1969This option is corresponding to ``IEEE 802.3cg-2019`` 30.16.1.1.3 1970aPLCANodeCount. The valid range for this attribute is [1 .. 255]. 1971 1972When set, the optional ``ETHTOOL_A_PLCA_TO_TMR`` attribute indicates the 1973configured value of the transmit opportunity timer in bit-times. This value 1974must be set equal across all nodes sharing the medium for PLCA to work 1975correctly. This option is corresponding to ``IEEE 802.3cg-2019`` 30.16.1.1.5 1976aPLCATransmitOpportunityTimer. The valid range for this attribute is 1977[0 .. 255]. 1978 1979When set, the optional ``ETHTOOL_A_PLCA_BURST_CNT`` attribute indicates the 1980configured number of extra packets that the node is allowed to send during a 1981single transmit opportunity. By default, this attribute is 0, meaning that 1982the node can only send a single frame per TO. When greater than 0, the PLCA RS 1983keeps the TO after any transmission, waiting for the MAC to send a new frame 1984for up to aPLCABurstTimer BTs. This can only happen a number of times per PLCA 1985cycle up to the value of this parameter. After that, the burst is over and the 1986normal counting of TOs resumes. This option is corresponding to 1987``IEEE 802.3cg-2019`` 30.16.1.1.6 aPLCAMaxBurstCount. The valid range for this 1988attribute is [0 .. 255]. 1989 1990When set, the optional ``ETHTOOL_A_PLCA_BURST_TMR`` attribute indicates how 1991many bit-times the PLCA RS waits for the MAC to initiate a new transmission 1992when aPLCAMaxBurstCount is greater than 0. If the MAC fails to send a new 1993frame within this time, the burst ends and the counting of TOs resumes. 1994Otherwise, the new frame is sent as part of the current burst. This option 1995is corresponding to ``IEEE 802.3cg-2019`` 30.16.1.1.7 aPLCABurstTimer. The 1996valid range for this attribute is [0 .. 255]. Although, the value should be 1997set greater than the Inter-Frame-Gap (IFG) time of the MAC (plus some margin) 1998for PLCA burst mode to work as intended. 1999 2000PLCA_SET_CFG 2001============ 2002 2003Sets PLCA RS parameters. 2004 2005Request contents: 2006 2007 ====================================== ====== ============================= 2008 ``ETHTOOL_A_PLCA_HEADER`` nested request header 2009 ``ETHTOOL_A_PLCA_ENABLED`` u8 PLCA Admin State 2010 ``ETHTOOL_A_PLCA_NODE_ID`` u8 PLCA unique local node ID 2011 ``ETHTOOL_A_PLCA_NODE_CNT`` u8 Number of PLCA nodes on the 2012 network, including the 2013 coordinator 2014 ``ETHTOOL_A_PLCA_TO_TMR`` u8 Transmit Opportunity Timer 2015 value in bit-times (BT) 2016 ``ETHTOOL_A_PLCA_BURST_CNT`` u8 Number of additional packets 2017 the node is allowed to send 2018 within a single TO 2019 ``ETHTOOL_A_PLCA_BURST_TMR`` u8 Time to wait for the MAC to 2020 transmit a new frame before 2021 terminating the burst 2022 ====================================== ====== ============================= 2023 2024For a description of each attribute, see ``PLCA_GET_CFG``. 2025 2026PLCA_GET_STATUS 2027=============== 2028 2029Gets PLCA RS status information. 2030 2031Request contents: 2032 2033 ===================================== ====== ========================== 2034 ``ETHTOOL_A_PLCA_HEADER`` nested request header 2035 ===================================== ====== ========================== 2036 2037Kernel response contents: 2038 2039 ====================================== ====== ============================= 2040 ``ETHTOOL_A_PLCA_HEADER`` nested reply header 2041 ``ETHTOOL_A_PLCA_STATUS`` u8 PLCA RS operational status 2042 ====================================== ====== ============================= 2043 2044When set, the ``ETHTOOL_A_PLCA_STATUS`` attribute indicates whether the node is 2045detecting the presence of the BEACON on the network. This flag is 2046corresponding to ``IEEE 802.3cg-2019`` 30.16.1.1.2 aPLCAStatus. 2047 2048MM_GET 2049====== 2050 2051Retrieve 802.3 MAC Merge parameters. 2052 2053Request contents: 2054 2055 ==================================== ====== ========================== 2056 ``ETHTOOL_A_MM_HEADER`` nested request header 2057 ==================================== ====== ========================== 2058 2059Kernel response contents: 2060 2061 ================================= ====== =================================== 2062 ``ETHTOOL_A_MM_HEADER`` nested request header 2063 ``ETHTOOL_A_MM_PMAC_ENABLED`` bool set if RX of preemptible and SMD-V 2064 frames is enabled 2065 ``ETHTOOL_A_MM_TX_ENABLED`` bool set if TX of preemptible frames is 2066 administratively enabled (might be 2067 inactive if verification failed) 2068 ``ETHTOOL_A_MM_TX_ACTIVE`` bool set if TX of preemptible frames is 2069 operationally enabled 2070 ``ETHTOOL_A_MM_TX_MIN_FRAG_SIZE`` u32 minimum size of transmitted 2071 non-final fragments, in octets 2072 ``ETHTOOL_A_MM_RX_MIN_FRAG_SIZE`` u32 minimum size of received non-final 2073 fragments, in octets 2074 ``ETHTOOL_A_MM_VERIFY_ENABLED`` bool set if TX of SMD-V frames is 2075 administratively enabled 2076 ``ETHTOOL_A_MM_VERIFY_STATUS`` u8 state of the verification function 2077 ``ETHTOOL_A_MM_VERIFY_TIME`` u32 delay between verification attempts 2078 ``ETHTOOL_A_MM_MAX_VERIFY_TIME``` u32 maximum verification interval 2079 supported by device 2080 ``ETHTOOL_A_MM_STATS`` nested IEEE 802.3-2018 subclause 30.14.1 2081 oMACMergeEntity statistics counters 2082 ================================= ====== =================================== 2083 2084The attributes are populated by the device driver through the following 2085structure: 2086 2087.. kernel-doc:: include/linux/ethtool.h 2088 :identifiers: ethtool_mm_state 2089 2090The ``ETHTOOL_A_MM_VERIFY_STATUS`` will report one of the values from 2091 2092.. kernel-doc:: include/uapi/linux/ethtool.h 2093 :identifiers: ethtool_mm_verify_status 2094 2095If ``ETHTOOL_A_MM_VERIFY_ENABLED`` was passed as false in the ``MM_SET`` 2096command, ``ETHTOOL_A_MM_VERIFY_STATUS`` will report either 2097``ETHTOOL_MM_VERIFY_STATUS_INITIAL`` or ``ETHTOOL_MM_VERIFY_STATUS_DISABLED``, 2098otherwise it should report one of the other states. 2099 2100It is recommended that drivers start with the pMAC disabled, and enable it upon 2101user space request. It is also recommended that user space does not depend upon 2102the default values from ``ETHTOOL_MSG_MM_GET`` requests. 2103 2104``ETHTOOL_A_MM_STATS`` are reported if ``ETHTOOL_FLAG_STATS`` was set in 2105``ETHTOOL_A_HEADER_FLAGS``. The attribute will be empty if driver did not 2106report any statistics. Drivers fill in the statistics in the following 2107structure: 2108 2109.. kernel-doc:: include/linux/ethtool.h 2110 :identifiers: ethtool_mm_stats 2111 2112MM_SET 2113====== 2114 2115Modifies the configuration of the 802.3 MAC Merge layer. 2116 2117Request contents: 2118 2119 ================================= ====== ========================== 2120 ``ETHTOOL_A_MM_VERIFY_TIME`` u32 see MM_GET description 2121 ``ETHTOOL_A_MM_VERIFY_ENABLED`` bool see MM_GET description 2122 ``ETHTOOL_A_MM_TX_ENABLED`` bool see MM_GET description 2123 ``ETHTOOL_A_MM_PMAC_ENABLED`` bool see MM_GET description 2124 ``ETHTOOL_A_MM_TX_MIN_FRAG_SIZE`` u32 see MM_GET description 2125 ================================= ====== ========================== 2126 2127The attributes are propagated to the driver through the following structure: 2128 2129.. kernel-doc:: include/linux/ethtool.h 2130 :identifiers: ethtool_mm_cfg 2131 2132MODULE_FW_FLASH_ACT 2133=================== 2134 2135Flashes transceiver module firmware. 2136 2137Request contents: 2138 2139 ======================================= ====== =========================== 2140 ``ETHTOOL_A_MODULE_FW_FLASH_HEADER`` nested request header 2141 ``ETHTOOL_A_MODULE_FW_FLASH_FILE_NAME`` string firmware image file name 2142 ``ETHTOOL_A_MODULE_FW_FLASH_PASSWORD`` u32 transceiver module password 2143 ======================================= ====== =========================== 2144 2145The firmware update process consists of three logical steps: 2146 21471. Downloading a firmware image to the transceiver module and validating it. 21482. Running the firmware image. 21493. Committing the firmware image so that it is run upon reset. 2150 2151When flash command is given, those three steps are taken in that order. 2152 2153This message merely schedules the update process and returns immediately 2154without blocking. The process then runs asynchronously. 2155Since it can take several minutes to complete, during the update process 2156notifications are emitted from the kernel to user space updating it about 2157the status and progress. 2158 2159The ``ETHTOOL_A_MODULE_FW_FLASH_FILE_NAME`` attribute encodes the firmware 2160image file name. The firmware image is downloaded to the transceiver module, 2161validated, run and committed. 2162 2163The optional ``ETHTOOL_A_MODULE_FW_FLASH_PASSWORD`` attribute encodes a password 2164that might be required as part of the transceiver module firmware update 2165process. 2166 2167The firmware update process can take several minutes to complete. Therefore, 2168during the update process notifications are emitted from the kernel to user 2169space updating it about the status and progress. 2170 2171 2172 2173Notification contents: 2174 2175 +---------------------------------------------------+--------+----------------+ 2176 | ``ETHTOOL_A_MODULE_FW_FLASH_HEADER`` | nested | reply header | 2177 +---------------------------------------------------+--------+----------------+ 2178 | ``ETHTOOL_A_MODULE_FW_FLASH_STATUS`` | u32 | status | 2179 +---------------------------------------------------+--------+----------------+ 2180 | ``ETHTOOL_A_MODULE_FW_FLASH_STATUS_MSG`` | string | status message | 2181 +---------------------------------------------------+--------+----------------+ 2182 | ``ETHTOOL_A_MODULE_FW_FLASH_DONE`` | uint | progress | 2183 +---------------------------------------------------+--------+----------------+ 2184 | ``ETHTOOL_A_MODULE_FW_FLASH_TOTAL`` | uint | total | 2185 +---------------------------------------------------+--------+----------------+ 2186 2187The ``ETHTOOL_A_MODULE_FW_FLASH_STATUS`` attribute encodes the current status 2188of the firmware update process. Possible values are: 2189 2190.. kernel-doc:: include/uapi/linux/ethtool.h 2191 :identifiers: ethtool_module_fw_flash_status 2192 2193The ``ETHTOOL_A_MODULE_FW_FLASH_STATUS_MSG`` attribute encodes a status message 2194string. 2195 2196The ``ETHTOOL_A_MODULE_FW_FLASH_DONE`` and ``ETHTOOL_A_MODULE_FW_FLASH_TOTAL`` 2197attributes encode the completed and total amount of work, respectively. 2198 2199PHY_GET 2200======= 2201 2202Retrieve information about a given Ethernet PHY sitting on the link. The DO 2203operation returns all available information about dev->phydev. User can also 2204specify a PHY_INDEX, in which case the DO request returns information about that 2205specific PHY. 2206 2207As there can be more than one PHY, the DUMP operation can be used to list the PHYs 2208present on a given interface, by passing an interface index or name in 2209the dump request. 2210 2211For more information, refer to :ref:`phy_link_topology` 2212 2213Request contents: 2214 2215 ==================================== ====== ========================== 2216 ``ETHTOOL_A_PHY_HEADER`` nested request header 2217 ==================================== ====== ========================== 2218 2219Kernel response contents: 2220 2221 ===================================== ====== =============================== 2222 ``ETHTOOL_A_PHY_HEADER`` nested request header 2223 ``ETHTOOL_A_PHY_INDEX`` u32 the phy's unique index, that can 2224 be used for phy-specific 2225 requests 2226 ``ETHTOOL_A_PHY_DRVNAME`` string the phy driver name 2227 ``ETHTOOL_A_PHY_NAME`` string the phy device name 2228 ``ETHTOOL_A_PHY_UPSTREAM_TYPE`` u32 the type of device this phy is 2229 connected to 2230 ``ETHTOOL_A_PHY_UPSTREAM_INDEX`` u32 the PHY index of the upstream 2231 PHY 2232 ``ETHTOOL_A_PHY_UPSTREAM_SFP_NAME`` string if this PHY is connected to 2233 its parent PHY through an SFP 2234 bus, the name of this sfp bus 2235 ``ETHTOOL_A_PHY_DOWNSTREAM_SFP_NAME`` string if the phy controls an sfp bus, 2236 the name of the sfp bus 2237 ===================================== ====== =============================== 2238 2239When ``ETHTOOL_A_PHY_UPSTREAM_TYPE`` is PHY_UPSTREAM_PHY, the PHY's parent is 2240another PHY. 2241 2242Request translation 2243=================== 2244 2245The following table maps ioctl commands to netlink commands providing their 2246functionality. Entries with "n/a" in right column are commands which do not 2247have their netlink replacement yet. Entries which "n/a" in the left column 2248are netlink only. 2249 2250 =================================== ===================================== 2251 ioctl command netlink command 2252 =================================== ===================================== 2253 ``ETHTOOL_GSET`` ``ETHTOOL_MSG_LINKINFO_GET`` 2254 ``ETHTOOL_MSG_LINKMODES_GET`` 2255 ``ETHTOOL_SSET`` ``ETHTOOL_MSG_LINKINFO_SET`` 2256 ``ETHTOOL_MSG_LINKMODES_SET`` 2257 ``ETHTOOL_GDRVINFO`` n/a 2258 ``ETHTOOL_GREGS`` n/a 2259 ``ETHTOOL_GWOL`` ``ETHTOOL_MSG_WOL_GET`` 2260 ``ETHTOOL_SWOL`` ``ETHTOOL_MSG_WOL_SET`` 2261 ``ETHTOOL_GMSGLVL`` ``ETHTOOL_MSG_DEBUG_GET`` 2262 ``ETHTOOL_SMSGLVL`` ``ETHTOOL_MSG_DEBUG_SET`` 2263 ``ETHTOOL_NWAY_RST`` n/a 2264 ``ETHTOOL_GLINK`` ``ETHTOOL_MSG_LINKSTATE_GET`` 2265 ``ETHTOOL_GEEPROM`` n/a 2266 ``ETHTOOL_SEEPROM`` n/a 2267 ``ETHTOOL_GCOALESCE`` ``ETHTOOL_MSG_COALESCE_GET`` 2268 ``ETHTOOL_SCOALESCE`` ``ETHTOOL_MSG_COALESCE_SET`` 2269 ``ETHTOOL_GRINGPARAM`` ``ETHTOOL_MSG_RINGS_GET`` 2270 ``ETHTOOL_SRINGPARAM`` ``ETHTOOL_MSG_RINGS_SET`` 2271 ``ETHTOOL_GPAUSEPARAM`` ``ETHTOOL_MSG_PAUSE_GET`` 2272 ``ETHTOOL_SPAUSEPARAM`` ``ETHTOOL_MSG_PAUSE_SET`` 2273 ``ETHTOOL_GRXCSUM`` ``ETHTOOL_MSG_FEATURES_GET`` 2274 ``ETHTOOL_SRXCSUM`` ``ETHTOOL_MSG_FEATURES_SET`` 2275 ``ETHTOOL_GTXCSUM`` ``ETHTOOL_MSG_FEATURES_GET`` 2276 ``ETHTOOL_STXCSUM`` ``ETHTOOL_MSG_FEATURES_SET`` 2277 ``ETHTOOL_GSG`` ``ETHTOOL_MSG_FEATURES_GET`` 2278 ``ETHTOOL_SSG`` ``ETHTOOL_MSG_FEATURES_SET`` 2279 ``ETHTOOL_TEST`` n/a 2280 ``ETHTOOL_GSTRINGS`` ``ETHTOOL_MSG_STRSET_GET`` 2281 ``ETHTOOL_PHYS_ID`` n/a 2282 ``ETHTOOL_GSTATS`` n/a 2283 ``ETHTOOL_GTSO`` ``ETHTOOL_MSG_FEATURES_GET`` 2284 ``ETHTOOL_STSO`` ``ETHTOOL_MSG_FEATURES_SET`` 2285 ``ETHTOOL_GPERMADDR`` rtnetlink ``RTM_GETLINK`` 2286 ``ETHTOOL_GUFO`` ``ETHTOOL_MSG_FEATURES_GET`` 2287 ``ETHTOOL_SUFO`` ``ETHTOOL_MSG_FEATURES_SET`` 2288 ``ETHTOOL_GGSO`` ``ETHTOOL_MSG_FEATURES_GET`` 2289 ``ETHTOOL_SGSO`` ``ETHTOOL_MSG_FEATURES_SET`` 2290 ``ETHTOOL_GFLAGS`` ``ETHTOOL_MSG_FEATURES_GET`` 2291 ``ETHTOOL_SFLAGS`` ``ETHTOOL_MSG_FEATURES_SET`` 2292 ``ETHTOOL_GPFLAGS`` ``ETHTOOL_MSG_PRIVFLAGS_GET`` 2293 ``ETHTOOL_SPFLAGS`` ``ETHTOOL_MSG_PRIVFLAGS_SET`` 2294 ``ETHTOOL_GRXFH`` n/a 2295 ``ETHTOOL_SRXFH`` n/a 2296 ``ETHTOOL_GGRO`` ``ETHTOOL_MSG_FEATURES_GET`` 2297 ``ETHTOOL_SGRO`` ``ETHTOOL_MSG_FEATURES_SET`` 2298 ``ETHTOOL_GRXRINGS`` n/a 2299 ``ETHTOOL_GRXCLSRLCNT`` n/a 2300 ``ETHTOOL_GRXCLSRULE`` n/a 2301 ``ETHTOOL_GRXCLSRLALL`` n/a 2302 ``ETHTOOL_SRXCLSRLDEL`` n/a 2303 ``ETHTOOL_SRXCLSRLINS`` n/a 2304 ``ETHTOOL_FLASHDEV`` n/a 2305 ``ETHTOOL_RESET`` n/a 2306 ``ETHTOOL_SRXNTUPLE`` n/a 2307 ``ETHTOOL_GRXNTUPLE`` n/a 2308 ``ETHTOOL_GSSET_INFO`` ``ETHTOOL_MSG_STRSET_GET`` 2309 ``ETHTOOL_GRXFHINDIR`` n/a 2310 ``ETHTOOL_SRXFHINDIR`` n/a 2311 ``ETHTOOL_GFEATURES`` ``ETHTOOL_MSG_FEATURES_GET`` 2312 ``ETHTOOL_SFEATURES`` ``ETHTOOL_MSG_FEATURES_SET`` 2313 ``ETHTOOL_GCHANNELS`` ``ETHTOOL_MSG_CHANNELS_GET`` 2314 ``ETHTOOL_SCHANNELS`` ``ETHTOOL_MSG_CHANNELS_SET`` 2315 ``ETHTOOL_SET_DUMP`` n/a 2316 ``ETHTOOL_GET_DUMP_FLAG`` n/a 2317 ``ETHTOOL_GET_DUMP_DATA`` n/a 2318 ``ETHTOOL_GET_TS_INFO`` ``ETHTOOL_MSG_TSINFO_GET`` 2319 ``ETHTOOL_GMODULEINFO`` ``ETHTOOL_MSG_MODULE_EEPROM_GET`` 2320 ``ETHTOOL_GMODULEEEPROM`` ``ETHTOOL_MSG_MODULE_EEPROM_GET`` 2321 ``ETHTOOL_GEEE`` ``ETHTOOL_MSG_EEE_GET`` 2322 ``ETHTOOL_SEEE`` ``ETHTOOL_MSG_EEE_SET`` 2323 ``ETHTOOL_GRSSH`` ``ETHTOOL_MSG_RSS_GET`` 2324 ``ETHTOOL_SRSSH`` n/a 2325 ``ETHTOOL_GTUNABLE`` n/a 2326 ``ETHTOOL_STUNABLE`` n/a 2327 ``ETHTOOL_GPHYSTATS`` n/a 2328 ``ETHTOOL_PERQUEUE`` n/a 2329 ``ETHTOOL_GLINKSETTINGS`` ``ETHTOOL_MSG_LINKINFO_GET`` 2330 ``ETHTOOL_MSG_LINKMODES_GET`` 2331 ``ETHTOOL_SLINKSETTINGS`` ``ETHTOOL_MSG_LINKINFO_SET`` 2332 ``ETHTOOL_MSG_LINKMODES_SET`` 2333 ``ETHTOOL_PHY_GTUNABLE`` n/a 2334 ``ETHTOOL_PHY_STUNABLE`` n/a 2335 ``ETHTOOL_GFECPARAM`` ``ETHTOOL_MSG_FEC_GET`` 2336 ``ETHTOOL_SFECPARAM`` ``ETHTOOL_MSG_FEC_SET`` 2337 n/a ``ETHTOOL_MSG_CABLE_TEST_ACT`` 2338 n/a ``ETHTOOL_MSG_CABLE_TEST_TDR_ACT`` 2339 n/a ``ETHTOOL_MSG_TUNNEL_INFO_GET`` 2340 n/a ``ETHTOOL_MSG_PHC_VCLOCKS_GET`` 2341 n/a ``ETHTOOL_MSG_MODULE_GET`` 2342 n/a ``ETHTOOL_MSG_MODULE_SET`` 2343 n/a ``ETHTOOL_MSG_PLCA_GET_CFG`` 2344 n/a ``ETHTOOL_MSG_PLCA_SET_CFG`` 2345 n/a ``ETHTOOL_MSG_PLCA_GET_STATUS`` 2346 n/a ``ETHTOOL_MSG_MM_GET`` 2347 n/a ``ETHTOOL_MSG_MM_SET`` 2348 n/a ``ETHTOOL_MSG_MODULE_FW_FLASH_ACT`` 2349 n/a ``ETHTOOL_MSG_PHY_GET`` 2350 =================================== ===================================== 2351