1.. SPDX-License-Identifier: GPL-2.0 2 3===================== 4Softnet Driver Issues 5===================== 6 7Probing guidelines 8================== 9 10Address validation 11------------------ 12 13Any hardware layer address you obtain for your device should 14be verified. For example, for ethernet check it with 15linux/etherdevice.h:is_valid_ether_addr() 16 17Close/stop guidelines 18===================== 19 20Quiescence 21---------- 22 23After the ndo_stop routine has been called, the hardware must 24not receive or transmit any data. All in flight packets must 25be aborted. If necessary, poll or wait for completion of 26any reset commands. 27 28Auto-close 29---------- 30 31The ndo_stop routine will be called by unregister_netdevice 32if device is still UP. 33 34Transmit path guidelines 35======================== 36 37Stop queues in advance 38---------------------- 39 40The ndo_start_xmit method must not return NETDEV_TX_BUSY under 41any normal circumstances. It is considered a hard error unless 42there is no way your device can tell ahead of time when its 43transmit function will become busy. 44 45Instead it must maintain the queue properly. For example, 46for a driver implementing scatter-gather this means: 47 48.. code-block:: c 49 50 static u32 drv_tx_avail(struct drv_ring *dr) 51 { 52 u32 used = READ_ONCE(dr->prod) - READ_ONCE(dr->cons); 53 54 return dr->tx_ring_size - (used & bp->tx_ring_mask); 55 } 56 57 static netdev_tx_t drv_hard_start_xmit(struct sk_buff *skb, 58 struct net_device *dev) 59 { 60 struct drv *dp = netdev_priv(dev); 61 struct netdev_queue *txq; 62 struct drv_ring *dr; 63 int idx; 64 65 idx = skb_get_queue_mapping(skb); 66 dr = dp->tx_rings[idx]; 67 txq = netdev_get_tx_queue(dev, idx); 68 69 //... 70 /* This should be a very rare race - log it. */ 71 if (drv_tx_avail(dr) <= skb_shinfo(skb)->nr_frags + 1) { 72 netif_stop_queue(dev); 73 netdev_warn(dev, "Tx Ring full when queue awake!\n"); 74 return NETDEV_TX_BUSY; 75 } 76 77 //... queue packet to card ... 78 79 netdev_tx_sent_queue(txq, skb->len); 80 81 //... update tx producer index using WRITE_ONCE() ... 82 83 if (!netif_txq_maybe_stop(txq, drv_tx_avail(dr), 84 MAX_SKB_FRAGS + 1, 2 * MAX_SKB_FRAGS)) 85 dr->stats.stopped++; 86 87 //... 88 return NETDEV_TX_OK; 89 } 90 91And then at the end of your TX reclamation event handling: 92 93.. code-block:: c 94 95 //... update tx consumer index using WRITE_ONCE() ... 96 97 netif_txq_completed_wake(txq, cmpl_pkts, cmpl_bytes, 98 drv_tx_avail(dr), 2 * MAX_SKB_FRAGS); 99 100Lockless queue stop / wake helper macros 101~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~ 102 103.. kernel-doc:: include/net/netdev_queues.h 104 :doc: Lockless queue stopping / waking helpers. 105 106No exclusive ownership 107---------------------- 108 109An ndo_start_xmit method must not modify the shared parts of a 110cloned SKB. 111 112Timely completions 113------------------ 114 115Do not forget that once you return NETDEV_TX_OK from your 116ndo_start_xmit method, it is your driver's responsibility to free 117up the SKB and in some finite amount of time. 118 119For example, this means that it is not allowed for your TX 120mitigation scheme to let TX packets "hang out" in the TX 121ring unreclaimed forever if no new TX packets are sent. 122This error can deadlock sockets waiting for send buffer room 123to be freed up. 124 125If you return NETDEV_TX_BUSY from the ndo_start_xmit method, you 126must not keep any reference to that SKB and you must not attempt 127to free it up. 128