1=================================== 2SocketCAN - Controller Area Network 3=================================== 4 5Overview / What is SocketCAN 6============================ 7 8The socketcan package is an implementation of CAN protocols 9(Controller Area Network) for Linux. CAN is a networking technology 10which has widespread use in automation, embedded devices, and 11automotive fields. While there have been other CAN implementations 12for Linux based on character devices, SocketCAN uses the Berkeley 13socket API, the Linux network stack and implements the CAN device 14drivers as network interfaces. The CAN socket API has been designed 15as similar as possible to the TCP/IP protocols to allow programmers, 16familiar with network programming, to easily learn how to use CAN 17sockets. 18 19 20.. _socketcan-motivation: 21 22Motivation / Why Using the Socket API 23===================================== 24 25There have been CAN implementations for Linux before SocketCAN so the 26question arises, why we have started another project. Most existing 27implementations come as a device driver for some CAN hardware, they 28are based on character devices and provide comparatively little 29functionality. Usually, there is only a hardware-specific device 30driver which provides a character device interface to send and 31receive raw CAN frames, directly to/from the controller hardware. 32Queueing of frames and higher-level transport protocols like ISO-TP 33have to be implemented in user space applications. Also, most 34character-device implementations support only one single process to 35open the device at a time, similar to a serial interface. Exchanging 36the CAN controller requires employment of another device driver and 37often the need for adaption of large parts of the application to the 38new driver's API. 39 40SocketCAN was designed to overcome all of these limitations. A new 41protocol family has been implemented which provides a socket interface 42to user space applications and which builds upon the Linux network 43layer, enabling use all of the provided queueing functionality. A device 44driver for CAN controller hardware registers itself with the Linux 45network layer as a network device, so that CAN frames from the 46controller can be passed up to the network layer and on to the CAN 47protocol family module and also vice-versa. Also, the protocol family 48module provides an API for transport protocol modules to register, so 49that any number of transport protocols can be loaded or unloaded 50dynamically. In fact, the can core module alone does not provide any 51protocol and cannot be used without loading at least one additional 52protocol module. Multiple sockets can be opened at the same time, 53on different or the same protocol module and they can listen/send 54frames on different or the same CAN IDs. Several sockets listening on 55the same interface for frames with the same CAN ID are all passed the 56same received matching CAN frames. An application wishing to 57communicate using a specific transport protocol, e.g. ISO-TP, just 58selects that protocol when opening the socket, and then can read and 59write application data byte streams, without having to deal with 60CAN-IDs, frames, etc. 61 62Similar functionality visible from user-space could be provided by a 63character device, too, but this would lead to a technically inelegant 64solution for a couple of reasons: 65 66* **Intricate usage:** Instead of passing a protocol argument to 67 socket(2) and using bind(2) to select a CAN interface and CAN ID, an 68 application would have to do all these operations using ioctl(2)s. 69 70* **Code duplication:** A character device cannot make use of the Linux 71 network queueing code, so all that code would have to be duplicated 72 for CAN networking. 73 74* **Abstraction:** In most existing character-device implementations, the 75 hardware-specific device driver for a CAN controller directly 76 provides the character device for the application to work with. 77 This is at least very unusual in Unix systems for both, char and 78 block devices. For example you don't have a character device for a 79 certain UART of a serial interface, a certain sound chip in your 80 computer, a SCSI or IDE controller providing access to your hard 81 disk or tape streamer device. Instead, you have abstraction layers 82 which provide a unified character or block device interface to the 83 application on the one hand, and a interface for hardware-specific 84 device drivers on the other hand. These abstractions are provided 85 by subsystems like the tty layer, the audio subsystem or the SCSI 86 and IDE subsystems for the devices mentioned above. 87 88 The easiest way to implement a CAN device driver is as a character 89 device without such a (complete) abstraction layer, as is done by most 90 existing drivers. The right way, however, would be to add such a 91 layer with all the functionality like registering for certain CAN 92 IDs, supporting several open file descriptors and (de)multiplexing 93 CAN frames between them, (sophisticated) queueing of CAN frames, and 94 providing an API for device drivers to register with. However, then 95 it would be no more difficult, or may be even easier, to use the 96 networking framework provided by the Linux kernel, and this is what 97 SocketCAN does. 98 99The use of the networking framework of the Linux kernel is just the 100natural and most appropriate way to implement CAN for Linux. 101 102 103.. _socketcan-concept: 104 105SocketCAN Concept 106================= 107 108As described in :ref:`socketcan-motivation` the main goal of SocketCAN is to 109provide a socket interface to user space applications which builds 110upon the Linux network layer. In contrast to the commonly known 111TCP/IP and ethernet networking, the CAN bus is a broadcast-only(!) 112medium that has no MAC-layer addressing like ethernet. The CAN-identifier 113(can_id) is used for arbitration on the CAN-bus. Therefore the CAN-IDs 114have to be chosen uniquely on the bus. When designing a CAN-ECU 115network the CAN-IDs are mapped to be sent by a specific ECU. 116For this reason a CAN-ID can be treated best as a kind of source address. 117 118 119.. _socketcan-receive-lists: 120 121Receive Lists 122------------- 123 124The network transparent access of multiple applications leads to the 125problem that different applications may be interested in the same 126CAN-IDs from the same CAN network interface. The SocketCAN core 127module - which implements the protocol family CAN - provides several 128high efficient receive lists for this reason. If e.g. a user space 129application opens a CAN RAW socket, the raw protocol module itself 130requests the (range of) CAN-IDs from the SocketCAN core that are 131requested by the user. The subscription and unsubscription of 132CAN-IDs can be done for specific CAN interfaces or for all(!) known 133CAN interfaces with the can_rx_(un)register() functions provided to 134CAN protocol modules by the SocketCAN core (see :ref:`socketcan-core-module`). 135To optimize the CPU usage at runtime the receive lists are split up 136into several specific lists per device that match the requested 137filter complexity for a given use-case. 138 139 140.. _socketcan-local-loopback1: 141 142Local Loopback of Sent Frames 143----------------------------- 144 145As known from other networking concepts the data exchanging 146applications may run on the same or different nodes without any 147change (except for the according addressing information): 148 149.. code:: 150 151 ___ ___ ___ _______ ___ 152 | _ | | _ | | _ | | _ _ | | _ | 153 ||A|| ||B|| ||C|| ||A| |B|| ||C|| 154 |___| |___| |___| |_______| |___| 155 | | | | | 156 -----------------(1)- CAN bus -(2)--------------- 157 158To ensure that application A receives the same information in the 159example (2) as it would receive in example (1) there is need for 160some kind of local loopback of the sent CAN frames on the appropriate 161node. 162 163The Linux network devices (by default) just can handle the 164transmission and reception of media dependent frames. Due to the 165arbitration on the CAN bus the transmission of a low prio CAN-ID 166may be delayed by the reception of a high prio CAN frame. To 167reflect the correct [#f1]_ traffic on the node the loopback of the sent 168data has to be performed right after a successful transmission. If 169the CAN network interface is not capable of performing the loopback for 170some reason the SocketCAN core can do this task as a fallback solution. 171See :ref:`socketcan-local-loopback2` for details (recommended). 172 173The loopback functionality is enabled by default to reflect standard 174networking behaviour for CAN applications. Due to some requests from 175the RT-SocketCAN group the loopback optionally may be disabled for each 176separate socket. See sockopts from the CAN RAW sockets in :ref:`socketcan-raw-sockets`. 177 178.. [#f1] you really like to have this when you're running analyser 179 tools like 'candump' or 'cansniffer' on the (same) node. 180 181 182.. _socketcan-network-problem-notifications: 183 184Network Problem Notifications 185----------------------------- 186 187The use of the CAN bus may lead to several problems on the physical 188and media access control layer. Detecting and logging of these lower 189layer problems is a vital requirement for CAN users to identify 190hardware issues on the physical transceiver layer as well as 191arbitration problems and error frames caused by the different 192ECUs. The occurrence of detected errors are important for diagnosis 193and have to be logged together with the exact timestamp. For this 194reason the CAN interface driver can generate so called Error Message 195Frames that can optionally be passed to the user application in the 196same way as other CAN frames. Whenever an error on the physical layer 197or the MAC layer is detected (e.g. by the CAN controller) the driver 198creates an appropriate error message frame. Error messages frames can 199be requested by the user application using the common CAN filter 200mechanisms. Inside this filter definition the (interested) type of 201errors may be selected. The reception of error messages is disabled 202by default. The format of the CAN error message frame is briefly 203described in the Linux header file "include/uapi/linux/can/error.h". 204 205 206How to use SocketCAN 207==================== 208 209Like TCP/IP, you first need to open a socket for communicating over a 210CAN network. Since SocketCAN implements a new protocol family, you 211need to pass PF_CAN as the first argument to the socket(2) system 212call. Currently, there are two CAN protocols to choose from, the raw 213socket protocol and the broadcast manager (BCM). So to open a socket, 214you would write:: 215 216 s = socket(PF_CAN, SOCK_RAW, CAN_RAW); 217 218and:: 219 220 s = socket(PF_CAN, SOCK_DGRAM, CAN_BCM); 221 222respectively. After the successful creation of the socket, you would 223normally use the bind(2) system call to bind the socket to a CAN 224interface (which is different from TCP/IP due to different addressing 225- see :ref:`socketcan-concept`). After binding (CAN_RAW) or connecting (CAN_BCM) 226the socket, you can read(2) and write(2) from/to the socket or use 227send(2), sendto(2), sendmsg(2) and the recv* counterpart operations 228on the socket as usual. There are also CAN specific socket options 229described below. 230 231The Classical CAN frame structure (aka CAN 2.0B), the CAN FD frame structure 232and the sockaddr structure are defined in include/linux/can.h: 233 234.. code-block:: C 235 236 struct can_frame { 237 canid_t can_id; /* 32 bit CAN_ID + EFF/RTR/ERR flags */ 238 union { 239 /* CAN frame payload length in byte (0 .. CAN_MAX_DLEN) 240 * was previously named can_dlc so we need to carry that 241 * name for legacy support 242 */ 243 __u8 len; 244 __u8 can_dlc; /* deprecated */ 245 }; 246 __u8 __pad; /* padding */ 247 __u8 __res0; /* reserved / padding */ 248 __u8 len8_dlc; /* optional DLC for 8 byte payload length (9 .. 15) */ 249 __u8 data[8] __attribute__((aligned(8))); 250 }; 251 252Remark: The len element contains the payload length in bytes and should be 253used instead of can_dlc. The deprecated can_dlc was misleadingly named as 254it always contained the plain payload length in bytes and not the so called 255'data length code' (DLC). 256 257To pass the raw DLC from/to a Classical CAN network device the len8_dlc 258element can contain values 9 .. 15 when the len element is 8 (the real 259payload length for all DLC values greater or equal to 8). 260 261The alignment of the (linear) payload data[] to a 64bit boundary 262allows the user to define their own structs and unions to easily access 263the CAN payload. There is no given byteorder on the CAN bus by 264default. A read(2) system call on a CAN_RAW socket transfers a 265struct can_frame to the user space. 266 267The sockaddr_can structure has an interface index like the 268PF_PACKET socket, that also binds to a specific interface: 269 270.. code-block:: C 271 272 struct sockaddr_can { 273 sa_family_t can_family; 274 int can_ifindex; 275 union { 276 /* transport protocol class address info (e.g. ISOTP) */ 277 struct { canid_t rx_id, tx_id; } tp; 278 279 /* J1939 address information */ 280 struct { 281 /* 8 byte name when using dynamic addressing */ 282 __u64 name; 283 284 /* pgn: 285 * 8 bit: PS in PDU2 case, else 0 286 * 8 bit: PF 287 * 1 bit: DP 288 * 1 bit: reserved 289 */ 290 __u32 pgn; 291 292 /* 1 byte address */ 293 __u8 addr; 294 } j1939; 295 296 /* reserved for future CAN protocols address information */ 297 } can_addr; 298 }; 299 300To determine the interface index an appropriate ioctl() has to 301be used (example for CAN_RAW sockets without error checking): 302 303.. code-block:: C 304 305 int s; 306 struct sockaddr_can addr; 307 struct ifreq ifr; 308 309 s = socket(PF_CAN, SOCK_RAW, CAN_RAW); 310 311 strcpy(ifr.ifr_name, "can0" ); 312 ioctl(s, SIOCGIFINDEX, &ifr); 313 314 addr.can_family = AF_CAN; 315 addr.can_ifindex = ifr.ifr_ifindex; 316 317 bind(s, (struct sockaddr *)&addr, sizeof(addr)); 318 319 (..) 320 321To bind a socket to all(!) CAN interfaces the interface index must 322be 0 (zero). In this case the socket receives CAN frames from every 323enabled CAN interface. To determine the originating CAN interface 324the system call recvfrom(2) may be used instead of read(2). To send 325on a socket that is bound to 'any' interface sendto(2) is needed to 326specify the outgoing interface. 327 328Reading CAN frames from a bound CAN_RAW socket (see above) consists 329of reading a struct can_frame: 330 331.. code-block:: C 332 333 struct can_frame frame; 334 335 nbytes = read(s, &frame, sizeof(struct can_frame)); 336 337 if (nbytes < 0) { 338 perror("can raw socket read"); 339 return 1; 340 } 341 342 /* paranoid check ... */ 343 if (nbytes < sizeof(struct can_frame)) { 344 fprintf(stderr, "read: incomplete CAN frame\n"); 345 return 1; 346 } 347 348 /* do something with the received CAN frame */ 349 350Writing CAN frames can be done similarly, with the write(2) system call:: 351 352 nbytes = write(s, &frame, sizeof(struct can_frame)); 353 354When the CAN interface is bound to 'any' existing CAN interface 355(addr.can_ifindex = 0) it is recommended to use recvfrom(2) if the 356information about the originating CAN interface is needed: 357 358.. code-block:: C 359 360 struct sockaddr_can addr; 361 struct ifreq ifr; 362 socklen_t len = sizeof(addr); 363 struct can_frame frame; 364 365 nbytes = recvfrom(s, &frame, sizeof(struct can_frame), 366 0, (struct sockaddr*)&addr, &len); 367 368 /* get interface name of the received CAN frame */ 369 ifr.ifr_ifindex = addr.can_ifindex; 370 ioctl(s, SIOCGIFNAME, &ifr); 371 printf("Received a CAN frame from interface %s", ifr.ifr_name); 372 373To write CAN frames on sockets bound to 'any' CAN interface the 374outgoing interface has to be defined certainly: 375 376.. code-block:: C 377 378 strcpy(ifr.ifr_name, "can0"); 379 ioctl(s, SIOCGIFINDEX, &ifr); 380 addr.can_ifindex = ifr.ifr_ifindex; 381 addr.can_family = AF_CAN; 382 383 nbytes = sendto(s, &frame, sizeof(struct can_frame), 384 0, (struct sockaddr*)&addr, sizeof(addr)); 385 386An accurate timestamp can be obtained with an ioctl(2) call after reading 387a message from the socket: 388 389.. code-block:: C 390 391 struct timeval tv; 392 ioctl(s, SIOCGSTAMP, &tv); 393 394The timestamp has a resolution of one microsecond and is set automatically 395at the reception of a CAN frame. 396 397Remark about CAN FD (flexible data rate) support: 398 399Generally the handling of CAN FD is very similar to the formerly described 400examples. The new CAN FD capable CAN controllers support two different 401bitrates for the arbitration phase and the payload phase of the CAN FD frame 402and up to 64 bytes of payload. This extended payload length breaks all the 403kernel interfaces (ABI) which heavily rely on the CAN frame with fixed eight 404bytes of payload (struct can_frame) like the CAN_RAW socket. Therefore e.g. 405the CAN_RAW socket supports a new socket option CAN_RAW_FD_FRAMES that 406switches the socket into a mode that allows the handling of CAN FD frames 407and Classical CAN frames simultaneously (see :ref:`socketcan-rawfd`). 408 409The struct canfd_frame is defined in include/linux/can.h: 410 411.. code-block:: C 412 413 struct canfd_frame { 414 canid_t can_id; /* 32 bit CAN_ID + EFF/RTR/ERR flags */ 415 __u8 len; /* frame payload length in byte (0 .. 64) */ 416 __u8 flags; /* additional flags for CAN FD */ 417 __u8 __res0; /* reserved / padding */ 418 __u8 __res1; /* reserved / padding */ 419 __u8 data[64] __attribute__((aligned(8))); 420 }; 421 422The struct canfd_frame and the existing struct can_frame have the can_id, 423the payload length and the payload data at the same offset inside their 424structures. This allows to handle the different structures very similar. 425When the content of a struct can_frame is copied into a struct canfd_frame 426all structure elements can be used as-is - only the data[] becomes extended. 427 428When introducing the struct canfd_frame it turned out that the data length 429code (DLC) of the struct can_frame was used as a length information as the 430length and the DLC has a 1:1 mapping in the range of 0 .. 8. To preserve 431the easy handling of the length information the canfd_frame.len element 432contains a plain length value from 0 .. 64. So both canfd_frame.len and 433can_frame.len are equal and contain a length information and no DLC. 434For details about the distinction of CAN and CAN FD capable devices and 435the mapping to the bus-relevant data length code (DLC), see :ref:`socketcan-can-fd-driver`. 436 437The length of the two CAN(FD) frame structures define the maximum transfer 438unit (MTU) of the CAN(FD) network interface and skbuff data length. Two 439definitions are specified for CAN specific MTUs in include/linux/can.h: 440 441.. code-block:: C 442 443 #define CAN_MTU (sizeof(struct can_frame)) == 16 => Classical CAN frame 444 #define CANFD_MTU (sizeof(struct canfd_frame)) == 72 => CAN FD frame 445 446 447Returned Message Flags 448---------------------- 449 450When using the system call recvmsg(2) on a RAW or a BCM socket, the 451msg->msg_flags field may contain the following flags: 452 453MSG_DONTROUTE: 454 set when the received frame was created on the local host. 455 456MSG_CONFIRM: 457 set when the frame was sent via the socket it is received on. 458 This flag can be interpreted as a 'transmission confirmation' when the 459 CAN driver supports the echo of frames on driver level, see 460 :ref:`socketcan-local-loopback1` and :ref:`socketcan-local-loopback2`. 461 (Note: In order to receive such messages on a RAW socket, 462 CAN_RAW_RECV_OWN_MSGS must be set.) 463 464 465.. _socketcan-raw-sockets: 466 467RAW Protocol Sockets with can_filters (SOCK_RAW) 468------------------------------------------------ 469 470Using CAN_RAW sockets is extensively comparable to the commonly 471known access to CAN character devices. To meet the new possibilities 472provided by the multi user SocketCAN approach, some reasonable 473defaults are set at RAW socket binding time: 474 475- The filters are set to exactly one filter receiving everything 476- The socket only receives valid data frames (=> no error message frames) 477- The loopback of sent CAN frames is enabled (see :ref:`socketcan-local-loopback2`) 478- The socket does not receive its own sent frames (in loopback mode) 479 480These default settings may be changed before or after binding the socket. 481To use the referenced definitions of the socket options for CAN_RAW 482sockets, include <linux/can/raw.h>. 483 484 485.. _socketcan-rawfilter: 486 487RAW socket option CAN_RAW_FILTER 488~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~ 489 490The reception of CAN frames using CAN_RAW sockets can be controlled 491by defining 0 .. n filters with the CAN_RAW_FILTER socket option. 492 493The CAN filter structure is defined in include/linux/can.h: 494 495.. code-block:: C 496 497 struct can_filter { 498 canid_t can_id; 499 canid_t can_mask; 500 }; 501 502A filter matches, when: 503 504.. code-block:: C 505 506 <received_can_id> & mask == can_id & mask 507 508which is analogous to known CAN controllers hardware filter semantics. 509The filter can be inverted in this semantic, when the CAN_INV_FILTER 510bit is set in can_id element of the can_filter structure. In 511contrast to CAN controller hardware filters the user may set 0 .. n 512receive filters for each open socket separately: 513 514.. code-block:: C 515 516 struct can_filter rfilter[2]; 517 518 rfilter[0].can_id = 0x123; 519 rfilter[0].can_mask = CAN_SFF_MASK; 520 rfilter[1].can_id = 0x200; 521 rfilter[1].can_mask = 0x700; 522 523 setsockopt(s, SOL_CAN_RAW, CAN_RAW_FILTER, &rfilter, sizeof(rfilter)); 524 525To disable the reception of CAN frames on the selected CAN_RAW socket: 526 527.. code-block:: C 528 529 setsockopt(s, SOL_CAN_RAW, CAN_RAW_FILTER, NULL, 0); 530 531To set the filters to zero filters is quite obsolete as to not read 532data causes the raw socket to discard the received CAN frames. But 533having this 'send only' use-case we may remove the receive list in the 534Kernel to save a little (really a very little!) CPU usage. 535 536CAN Filter Usage Optimisation 537............................. 538 539The CAN filters are processed in per-device filter lists at CAN frame 540reception time. To reduce the number of checks that need to be performed 541while walking through the filter lists the CAN core provides an optimized 542filter handling when the filter subscription focusses on a single CAN ID. 543 544For the possible 2048 SFF CAN identifiers the identifier is used as an index 545to access the corresponding subscription list without any further checks. 546For the 2^29 possible EFF CAN identifiers a 10 bit XOR folding is used as 547hash function to retrieve the EFF table index. 548 549To benefit from the optimized filters for single CAN identifiers the 550CAN_SFF_MASK or CAN_EFF_MASK have to be set into can_filter.mask together 551with set CAN_EFF_FLAG and CAN_RTR_FLAG bits. A set CAN_EFF_FLAG bit in the 552can_filter.mask makes clear that it matters whether a SFF or EFF CAN ID is 553subscribed. E.g. in the example from above: 554 555.. code-block:: C 556 557 rfilter[0].can_id = 0x123; 558 rfilter[0].can_mask = CAN_SFF_MASK; 559 560both SFF frames with CAN ID 0x123 and EFF frames with 0xXXXXX123 can pass. 561 562To filter for only 0x123 (SFF) and 0x12345678 (EFF) CAN identifiers the 563filter has to be defined in this way to benefit from the optimized filters: 564 565.. code-block:: C 566 567 struct can_filter rfilter[2]; 568 569 rfilter[0].can_id = 0x123; 570 rfilter[0].can_mask = (CAN_EFF_FLAG | CAN_RTR_FLAG | CAN_SFF_MASK); 571 rfilter[1].can_id = 0x12345678 | CAN_EFF_FLAG; 572 rfilter[1].can_mask = (CAN_EFF_FLAG | CAN_RTR_FLAG | CAN_EFF_MASK); 573 574 setsockopt(s, SOL_CAN_RAW, CAN_RAW_FILTER, &rfilter, sizeof(rfilter)); 575 576 577RAW Socket Option CAN_RAW_ERR_FILTER 578~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~ 579 580As described in :ref:`socketcan-network-problem-notifications` the CAN interface driver can generate so 581called Error Message Frames that can optionally be passed to the user 582application in the same way as other CAN frames. The possible 583errors are divided into different error classes that may be filtered 584using the appropriate error mask. To register for every possible 585error condition CAN_ERR_MASK can be used as value for the error mask. 586The values for the error mask are defined in linux/can/error.h: 587 588.. code-block:: C 589 590 can_err_mask_t err_mask = ( CAN_ERR_TX_TIMEOUT | CAN_ERR_BUSOFF ); 591 592 setsockopt(s, SOL_CAN_RAW, CAN_RAW_ERR_FILTER, 593 &err_mask, sizeof(err_mask)); 594 595 596RAW Socket Option CAN_RAW_LOOPBACK 597~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~ 598 599To meet multi user needs the local loopback is enabled by default 600(see :ref:`socketcan-local-loopback1` for details). But in some embedded use-cases 601(e.g. when only one application uses the CAN bus) this loopback 602functionality can be disabled (separately for each socket): 603 604.. code-block:: C 605 606 int loopback = 0; /* 0 = disabled, 1 = enabled (default) */ 607 608 setsockopt(s, SOL_CAN_RAW, CAN_RAW_LOOPBACK, &loopback, sizeof(loopback)); 609 610 611RAW socket option CAN_RAW_RECV_OWN_MSGS 612~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~ 613 614When the local loopback is enabled, all the sent CAN frames are 615looped back to the open CAN sockets that registered for the CAN 616frames' CAN-ID on this given interface to meet the multi user 617needs. The reception of the CAN frames on the same socket that was 618sending the CAN frame is assumed to be unwanted and therefore 619disabled by default. This default behaviour may be changed on 620demand: 621 622.. code-block:: C 623 624 int recv_own_msgs = 1; /* 0 = disabled (default), 1 = enabled */ 625 626 setsockopt(s, SOL_CAN_RAW, CAN_RAW_RECV_OWN_MSGS, 627 &recv_own_msgs, sizeof(recv_own_msgs)); 628 629Note that reception of a socket's own CAN frames are subject to the same 630filtering as other CAN frames (see :ref:`socketcan-rawfilter`). 631 632.. _socketcan-rawfd: 633 634RAW Socket Option CAN_RAW_FD_FRAMES 635~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~ 636 637CAN FD support in CAN_RAW sockets can be enabled with a new socket option 638CAN_RAW_FD_FRAMES which is off by default. When the new socket option is 639not supported by the CAN_RAW socket (e.g. on older kernels), switching the 640CAN_RAW_FD_FRAMES option returns the error -ENOPROTOOPT. 641 642Once CAN_RAW_FD_FRAMES is enabled the application can send both CAN frames 643and CAN FD frames. OTOH the application has to handle CAN and CAN FD frames 644when reading from the socket: 645 646.. code-block:: C 647 648 CAN_RAW_FD_FRAMES enabled: CAN_MTU and CANFD_MTU are allowed 649 CAN_RAW_FD_FRAMES disabled: only CAN_MTU is allowed (default) 650 651Example: 652 653.. code-block:: C 654 655 [ remember: CANFD_MTU == sizeof(struct canfd_frame) ] 656 657 struct canfd_frame cfd; 658 659 nbytes = read(s, &cfd, CANFD_MTU); 660 661 if (nbytes == CANFD_MTU) { 662 printf("got CAN FD frame with length %d\n", cfd.len); 663 /* cfd.flags contains valid data */ 664 } else if (nbytes == CAN_MTU) { 665 printf("got Classical CAN frame with length %d\n", cfd.len); 666 /* cfd.flags is undefined */ 667 } else { 668 fprintf(stderr, "read: invalid CAN(FD) frame\n"); 669 return 1; 670 } 671 672 /* the content can be handled independently from the received MTU size */ 673 674 printf("can_id: %X data length: %d data: ", cfd.can_id, cfd.len); 675 for (i = 0; i < cfd.len; i++) 676 printf("%02X ", cfd.data[i]); 677 678When reading with size CANFD_MTU only returns CAN_MTU bytes that have 679been received from the socket a Classical CAN frame has been read into the 680provided CAN FD structure. Note that the canfd_frame.flags data field is 681not specified in the struct can_frame and therefore it is only valid in 682CANFD_MTU sized CAN FD frames. 683 684Implementation hint for new CAN applications: 685 686To build a CAN FD aware application use struct canfd_frame as basic CAN 687data structure for CAN_RAW based applications. When the application is 688executed on an older Linux kernel and switching the CAN_RAW_FD_FRAMES 689socket option returns an error: No problem. You'll get Classical CAN frames 690or CAN FD frames and can process them the same way. 691 692When sending to CAN devices make sure that the device is capable to handle 693CAN FD frames by checking if the device maximum transfer unit is CANFD_MTU. 694The CAN device MTU can be retrieved e.g. with a SIOCGIFMTU ioctl() syscall. 695 696 697RAW socket option CAN_RAW_JOIN_FILTERS 698~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~ 699 700The CAN_RAW socket can set multiple CAN identifier specific filters that 701lead to multiple filters in the af_can.c filter processing. These filters 702are independent from each other which leads to logical OR'ed filters when 703applied (see :ref:`socketcan-rawfilter`). 704 705This socket option joins the given CAN filters in the way that only CAN 706frames are passed to user space that matched *all* given CAN filters. The 707semantic for the applied filters is therefore changed to a logical AND. 708 709This is useful especially when the filterset is a combination of filters 710where the CAN_INV_FILTER flag is set in order to notch single CAN IDs or 711CAN ID ranges from the incoming traffic. 712 713 714Broadcast Manager Protocol Sockets (SOCK_DGRAM) 715----------------------------------------------- 716 717The Broadcast Manager protocol provides a command based configuration 718interface to filter and send (e.g. cyclic) CAN messages in kernel space. 719 720Receive filters can be used to down sample frequent messages; detect events 721such as message contents changes, packet length changes, and do time-out 722monitoring of received messages. 723 724Periodic transmission tasks of CAN frames or a sequence of CAN frames can be 725created and modified at runtime; both the message content and the two 726possible transmit intervals can be altered. 727 728A BCM socket is not intended for sending individual CAN frames using the 729struct can_frame as known from the CAN_RAW socket. Instead a special BCM 730configuration message is defined. The basic BCM configuration message used 731to communicate with the broadcast manager and the available operations are 732defined in the linux/can/bcm.h include. The BCM message consists of a 733message header with a command ('opcode') followed by zero or more CAN frames. 734The broadcast manager sends responses to user space in the same form: 735 736.. code-block:: C 737 738 struct bcm_msg_head { 739 __u32 opcode; /* command */ 740 __u32 flags; /* special flags */ 741 __u32 count; /* run 'count' times with ival1 */ 742 struct timeval ival1, ival2; /* count and subsequent interval */ 743 canid_t can_id; /* unique can_id for task */ 744 __u32 nframes; /* number of can_frames following */ 745 struct can_frame frames[0]; 746 }; 747 748The aligned payload 'frames' uses the same basic CAN frame structure defined 749at the beginning of :ref:`socketcan-rawfd` and in the include/linux/can.h include. All 750messages to the broadcast manager from user space have this structure. 751 752Note a CAN_BCM socket must be connected instead of bound after socket 753creation (example without error checking): 754 755.. code-block:: C 756 757 int s; 758 struct sockaddr_can addr; 759 struct ifreq ifr; 760 761 s = socket(PF_CAN, SOCK_DGRAM, CAN_BCM); 762 763 strcpy(ifr.ifr_name, "can0"); 764 ioctl(s, SIOCGIFINDEX, &ifr); 765 766 addr.can_family = AF_CAN; 767 addr.can_ifindex = ifr.ifr_ifindex; 768 769 connect(s, (struct sockaddr *)&addr, sizeof(addr)); 770 771 (..) 772 773The broadcast manager socket is able to handle any number of in flight 774transmissions or receive filters concurrently. The different RX/TX jobs are 775distinguished by the unique can_id in each BCM message. However additional 776CAN_BCM sockets are recommended to communicate on multiple CAN interfaces. 777When the broadcast manager socket is bound to 'any' CAN interface (=> the 778interface index is set to zero) the configured receive filters apply to any 779CAN interface unless the sendto() syscall is used to overrule the 'any' CAN 780interface index. When using recvfrom() instead of read() to retrieve BCM 781socket messages the originating CAN interface is provided in can_ifindex. 782 783 784Broadcast Manager Operations 785~~~~~~~~~~~~~~~~~~~~~~~~~~~~ 786 787The opcode defines the operation for the broadcast manager to carry out, 788or details the broadcast managers response to several events, including 789user requests. 790 791Transmit Operations (user space to broadcast manager): 792 793TX_SETUP: 794 Create (cyclic) transmission task. 795 796TX_DELETE: 797 Remove (cyclic) transmission task, requires only can_id. 798 799TX_READ: 800 Read properties of (cyclic) transmission task for can_id. 801 802TX_SEND: 803 Send one CAN frame. 804 805Transmit Responses (broadcast manager to user space): 806 807TX_STATUS: 808 Reply to TX_READ request (transmission task configuration). 809 810TX_EXPIRED: 811 Notification when counter finishes sending at initial interval 812 'ival1'. Requires the TX_COUNTEVT flag to be set at TX_SETUP. 813 814Receive Operations (user space to broadcast manager): 815 816RX_SETUP: 817 Create RX content filter subscription. 818 819RX_DELETE: 820 Remove RX content filter subscription, requires only can_id. 821 822RX_READ: 823 Read properties of RX content filter subscription for can_id. 824 825Receive Responses (broadcast manager to user space): 826 827RX_STATUS: 828 Reply to RX_READ request (filter task configuration). 829 830RX_TIMEOUT: 831 Cyclic message is detected to be absent (timer ival1 expired). 832 833RX_CHANGED: 834 BCM message with updated CAN frame (detected content change). 835 Sent on first message received or on receipt of revised CAN messages. 836 837 838Broadcast Manager Message Flags 839~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~ 840 841When sending a message to the broadcast manager the 'flags' element may 842contain the following flag definitions which influence the behaviour: 843 844SETTIMER: 845 Set the values of ival1, ival2 and count 846 847STARTTIMER: 848 Start the timer with the actual values of ival1, ival2 849 and count. Starting the timer leads simultaneously to emit a CAN frame. 850 851TX_COUNTEVT: 852 Create the message TX_EXPIRED when count expires 853 854TX_ANNOUNCE: 855 A change of data by the process is emitted immediately. 856 857TX_CP_CAN_ID: 858 Copies the can_id from the message header to each 859 subsequent frame in frames. This is intended as usage simplification. For 860 TX tasks the unique can_id from the message header may differ from the 861 can_id(s) stored for transmission in the subsequent struct can_frame(s). 862 863RX_FILTER_ID: 864 Filter by can_id alone, no frames required (nframes=0). 865 866RX_CHECK_DLC: 867 A change of the DLC leads to an RX_CHANGED. 868 869RX_NO_AUTOTIMER: 870 Prevent automatically starting the timeout monitor. 871 872RX_ANNOUNCE_RESUME: 873 If passed at RX_SETUP and a receive timeout occurred, a 874 RX_CHANGED message will be generated when the (cyclic) receive restarts. 875 876TX_RESET_MULTI_IDX: 877 Reset the index for the multiple frame transmission. 878 879RX_RTR_FRAME: 880 Send reply for RTR-request (placed in op->frames[0]). 881 882CAN_FD_FRAME: 883 The CAN frames following the bcm_msg_head are struct canfd_frame's 884 885Broadcast Manager Transmission Timers 886~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~ 887 888Periodic transmission configurations may use up to two interval timers. 889In this case the BCM sends a number of messages ('count') at an interval 890'ival1', then continuing to send at another given interval 'ival2'. When 891only one timer is needed 'count' is set to zero and only 'ival2' is used. 892When SET_TIMER and START_TIMER flag were set the timers are activated. 893The timer values can be altered at runtime when only SET_TIMER is set. 894 895 896Broadcast Manager message sequence transmission 897~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~ 898 899Up to 256 CAN frames can be transmitted in a sequence in the case of a cyclic 900TX task configuration. The number of CAN frames is provided in the 'nframes' 901element of the BCM message head. The defined number of CAN frames are added 902as array to the TX_SETUP BCM configuration message: 903 904.. code-block:: C 905 906 /* create a struct to set up a sequence of four CAN frames */ 907 struct { 908 struct bcm_msg_head msg_head; 909 struct can_frame frame[4]; 910 } mytxmsg; 911 912 (..) 913 mytxmsg.msg_head.nframes = 4; 914 (..) 915 916 write(s, &mytxmsg, sizeof(mytxmsg)); 917 918With every transmission the index in the array of CAN frames is increased 919and set to zero at index overflow. 920 921 922Broadcast Manager Receive Filter Timers 923~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~ 924 925The timer values ival1 or ival2 may be set to non-zero values at RX_SETUP. 926When the SET_TIMER flag is set the timers are enabled: 927 928ival1: 929 Send RX_TIMEOUT when a received message is not received again within 930 the given time. When START_TIMER is set at RX_SETUP the timeout detection 931 is activated directly - even without a former CAN frame reception. 932 933ival2: 934 Throttle the received message rate down to the value of ival2. This 935 is useful to reduce messages for the application when the signal inside the 936 CAN frame is stateless as state changes within the ival2 period may get 937 lost. 938 939Broadcast Manager Multiplex Message Receive Filter 940~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~ 941 942To filter for content changes in multiplex message sequences an array of more 943than one CAN frames can be passed in a RX_SETUP configuration message. The 944data bytes of the first CAN frame contain the mask of relevant bits that 945have to match in the subsequent CAN frames with the received CAN frame. 946If one of the subsequent CAN frames is matching the bits in that frame data 947mark the relevant content to be compared with the previous received content. 948Up to 257 CAN frames (multiplex filter bit mask CAN frame plus 256 CAN 949filters) can be added as array to the TX_SETUP BCM configuration message: 950 951.. code-block:: C 952 953 /* usually used to clear CAN frame data[] - beware of endian problems! */ 954 #define U64_DATA(p) (*(unsigned long long*)(p)->data) 955 956 struct { 957 struct bcm_msg_head msg_head; 958 struct can_frame frame[5]; 959 } msg; 960 961 msg.msg_head.opcode = RX_SETUP; 962 msg.msg_head.can_id = 0x42; 963 msg.msg_head.flags = 0; 964 msg.msg_head.nframes = 5; 965 U64_DATA(&msg.frame[0]) = 0xFF00000000000000ULL; /* MUX mask */ 966 U64_DATA(&msg.frame[1]) = 0x01000000000000FFULL; /* data mask (MUX 0x01) */ 967 U64_DATA(&msg.frame[2]) = 0x0200FFFF000000FFULL; /* data mask (MUX 0x02) */ 968 U64_DATA(&msg.frame[3]) = 0x330000FFFFFF0003ULL; /* data mask (MUX 0x33) */ 969 U64_DATA(&msg.frame[4]) = 0x4F07FC0FF0000000ULL; /* data mask (MUX 0x4F) */ 970 971 write(s, &msg, sizeof(msg)); 972 973 974Broadcast Manager CAN FD Support 975~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~ 976 977The programming API of the CAN_BCM depends on struct can_frame which is 978given as array directly behind the bcm_msg_head structure. To follow this 979schema for the CAN FD frames a new flag 'CAN_FD_FRAME' in the bcm_msg_head 980flags indicates that the concatenated CAN frame structures behind the 981bcm_msg_head are defined as struct canfd_frame: 982 983.. code-block:: C 984 985 struct { 986 struct bcm_msg_head msg_head; 987 struct canfd_frame frame[5]; 988 } msg; 989 990 msg.msg_head.opcode = RX_SETUP; 991 msg.msg_head.can_id = 0x42; 992 msg.msg_head.flags = CAN_FD_FRAME; 993 msg.msg_head.nframes = 5; 994 (..) 995 996When using CAN FD frames for multiplex filtering the MUX mask is still 997expected in the first 64 bit of the struct canfd_frame data section. 998 999 1000Connected Transport Protocols (SOCK_SEQPACKET) 1001---------------------------------------------- 1002 1003(to be written) 1004 1005 1006Unconnected Transport Protocols (SOCK_DGRAM) 1007-------------------------------------------- 1008 1009(to be written) 1010 1011 1012.. _socketcan-core-module: 1013 1014SocketCAN Core Module 1015===================== 1016 1017The SocketCAN core module implements the protocol family 1018PF_CAN. CAN protocol modules are loaded by the core module at 1019runtime. The core module provides an interface for CAN protocol 1020modules to subscribe needed CAN IDs (see :ref:`socketcan-receive-lists`). 1021 1022 1023can.ko Module Params 1024-------------------- 1025 1026- **stats_timer**: 1027 To calculate the SocketCAN core statistics 1028 (e.g. current/maximum frames per second) this 1 second timer is 1029 invoked at can.ko module start time by default. This timer can be 1030 disabled by using stattimer=0 on the module commandline. 1031 1032- **debug**: 1033 (removed since SocketCAN SVN r546) 1034 1035 1036procfs content 1037-------------- 1038 1039As described in :ref:`socketcan-receive-lists` the SocketCAN core uses several filter 1040lists to deliver received CAN frames to CAN protocol modules. These 1041receive lists, their filters and the count of filter matches can be 1042checked in the appropriate receive list. All entries contain the 1043device and a protocol module identifier:: 1044 1045 foo@bar:~$ cat /proc/net/can/rcvlist_all 1046 1047 receive list 'rx_all': 1048 (vcan3: no entry) 1049 (vcan2: no entry) 1050 (vcan1: no entry) 1051 device can_id can_mask function userdata matches ident 1052 vcan0 000 00000000 f88e6370 f6c6f400 0 raw 1053 (any: no entry) 1054 1055In this example an application requests any CAN traffic from vcan0:: 1056 1057 rcvlist_all - list for unfiltered entries (no filter operations) 1058 rcvlist_eff - list for single extended frame (EFF) entries 1059 rcvlist_err - list for error message frames masks 1060 rcvlist_fil - list for mask/value filters 1061 rcvlist_inv - list for mask/value filters (inverse semantic) 1062 rcvlist_sff - list for single standard frame (SFF) entries 1063 1064Additional procfs files in /proc/net/can:: 1065 1066 stats - SocketCAN core statistics (rx/tx frames, match ratios, ...) 1067 reset_stats - manual statistic reset 1068 version - prints SocketCAN core and ABI version (removed in Linux 5.10) 1069 1070 1071Writing Own CAN Protocol Modules 1072-------------------------------- 1073 1074To implement a new protocol in the protocol family PF_CAN a new 1075protocol has to be defined in include/linux/can.h . 1076The prototypes and definitions to use the SocketCAN core can be 1077accessed by including include/linux/can/core.h . 1078In addition to functions that register the CAN protocol and the 1079CAN device notifier chain there are functions to subscribe CAN 1080frames received by CAN interfaces and to send CAN frames:: 1081 1082 can_rx_register - subscribe CAN frames from a specific interface 1083 can_rx_unregister - unsubscribe CAN frames from a specific interface 1084 can_send - transmit a CAN frame (optional with local loopback) 1085 1086For details see the kerneldoc documentation in net/can/af_can.c or 1087the source code of net/can/raw.c or net/can/bcm.c . 1088 1089 1090CAN Network Drivers 1091=================== 1092 1093Writing a CAN network device driver is much easier than writing a 1094CAN character device driver. Similar to other known network device 1095drivers you mainly have to deal with: 1096 1097- TX: Put the CAN frame from the socket buffer to the CAN controller. 1098- RX: Put the CAN frame from the CAN controller to the socket buffer. 1099 1100See e.g. at Documentation/networking/netdevices.rst . The differences 1101for writing CAN network device driver are described below: 1102 1103 1104General Settings 1105---------------- 1106 1107CAN network device drivers can use alloc_candev_mqs() and friends instead of 1108alloc_netdev_mqs(), to automatically take care of CAN-specific setup: 1109 1110.. code-block:: C 1111 1112 dev = alloc_candev_mqs(...); 1113 1114The struct can_frame or struct canfd_frame is the payload of each socket 1115buffer (skbuff) in the protocol family PF_CAN. 1116 1117 1118.. _socketcan-local-loopback2: 1119 1120Local Loopback of Sent Frames 1121----------------------------- 1122 1123As described in :ref:`socketcan-local-loopback1` the CAN network device driver should 1124support a local loopback functionality similar to the local echo 1125e.g. of tty devices. In this case the driver flag IFF_ECHO has to be 1126set to prevent the PF_CAN core from locally echoing sent frames 1127(aka loopback) as fallback solution:: 1128 1129 dev->flags = (IFF_NOARP | IFF_ECHO); 1130 1131 1132CAN Controller Hardware Filters 1133------------------------------- 1134 1135To reduce the interrupt load on deep embedded systems some CAN 1136controllers support the filtering of CAN IDs or ranges of CAN IDs. 1137These hardware filter capabilities vary from controller to 1138controller and have to be identified as not feasible in a multi-user 1139networking approach. The use of the very controller specific 1140hardware filters could make sense in a very dedicated use-case, as a 1141filter on driver level would affect all users in the multi-user 1142system. The high efficient filter sets inside the PF_CAN core allow 1143to set different multiple filters for each socket separately. 1144Therefore the use of hardware filters goes to the category 'handmade 1145tuning on deep embedded systems'. The author is running a MPC603e 1146@133MHz with four SJA1000 CAN controllers from 2002 under heavy bus 1147load without any problems ... 1148 1149 1150Switchable Termination Resistors 1151-------------------------------- 1152 1153CAN bus requires a specific impedance across the differential pair, 1154typically provided by two 120Ohm resistors on the farthest nodes of 1155the bus. Some CAN controllers support activating / deactivating a 1156termination resistor(s) to provide the correct impedance. 1157 1158Query the available resistances:: 1159 1160 $ ip -details link show can0 1161 ... 1162 termination 120 [ 0, 120 ] 1163 1164Activate the terminating resistor:: 1165 1166 $ ip link set dev can0 type can termination 120 1167 1168Deactivate the terminating resistor:: 1169 1170 $ ip link set dev can0 type can termination 0 1171 1172To enable termination resistor support to a can-controller, either 1173implement in the controller's struct can-priv:: 1174 1175 termination_const 1176 termination_const_cnt 1177 do_set_termination 1178 1179or add gpio control with the device tree entries from 1180Documentation/devicetree/bindings/net/can/can-controller.yaml 1181 1182 1183The Virtual CAN Driver (vcan) 1184----------------------------- 1185 1186Similar to the network loopback devices, vcan offers a virtual local 1187CAN interface. A full qualified address on CAN consists of 1188 1189- a unique CAN Identifier (CAN ID) 1190- the CAN bus this CAN ID is transmitted on (e.g. can0) 1191 1192so in common use cases more than one virtual CAN interface is needed. 1193 1194The virtual CAN interfaces allow the transmission and reception of CAN 1195frames without real CAN controller hardware. Virtual CAN network 1196devices are usually named 'vcanX', like vcan0 vcan1 vcan2 ... 1197When compiled as a module the virtual CAN driver module is called vcan.ko 1198 1199Since Linux Kernel version 2.6.24 the vcan driver supports the Kernel 1200netlink interface to create vcan network devices. The creation and 1201removal of vcan network devices can be managed with the ip(8) tool:: 1202 1203 - Create a virtual CAN network interface: 1204 $ ip link add type vcan 1205 1206 - Create a virtual CAN network interface with a specific name 'vcan42': 1207 $ ip link add dev vcan42 type vcan 1208 1209 - Remove a (virtual CAN) network interface 'vcan42': 1210 $ ip link del vcan42 1211 1212 1213The CAN Network Device Driver Interface 1214--------------------------------------- 1215 1216The CAN network device driver interface provides a generic interface 1217to setup, configure and monitor CAN network devices. The user can then 1218configure the CAN device, like setting the bit-timing parameters, via 1219the netlink interface using the program "ip" from the "IPROUTE2" 1220utility suite. The following chapter describes briefly how to use it. 1221Furthermore, the interface uses a common data structure and exports a 1222set of common functions, which all real CAN network device drivers 1223should use. Please have a look to the SJA1000 or MSCAN driver to 1224understand how to use them. The name of the module is can-dev.ko. 1225 1226 1227Netlink interface to set/get devices properties 1228~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~ 1229 1230The CAN device must be configured via netlink interface. The supported 1231netlink message types are defined and briefly described in 1232"include/linux/can/netlink.h". CAN link support for the program "ip" 1233of the IPROUTE2 utility suite is available and it can be used as shown 1234below: 1235 1236Setting CAN device properties:: 1237 1238 $ ip link set can0 type can help 1239 Usage: ip link set DEVICE type can 1240 [ bitrate BITRATE [ sample-point SAMPLE-POINT] ] | 1241 [ tq TQ prop-seg PROP_SEG phase-seg1 PHASE-SEG1 1242 phase-seg2 PHASE-SEG2 [ sjw SJW ] ] 1243 1244 [ dbitrate BITRATE [ dsample-point SAMPLE-POINT] ] | 1245 [ dtq TQ dprop-seg PROP_SEG dphase-seg1 PHASE-SEG1 1246 dphase-seg2 PHASE-SEG2 [ dsjw SJW ] ] 1247 1248 [ loopback { on | off } ] 1249 [ listen-only { on | off } ] 1250 [ triple-sampling { on | off } ] 1251 [ one-shot { on | off } ] 1252 [ berr-reporting { on | off } ] 1253 [ fd { on | off } ] 1254 [ fd-non-iso { on | off } ] 1255 [ presume-ack { on | off } ] 1256 [ cc-len8-dlc { on | off } ] 1257 1258 [ restart-ms TIME-MS ] 1259 [ restart ] 1260 1261 Where: BITRATE := { 1..1000000 } 1262 SAMPLE-POINT := { 0.000..0.999 } 1263 TQ := { NUMBER } 1264 PROP-SEG := { 1..8 } 1265 PHASE-SEG1 := { 1..8 } 1266 PHASE-SEG2 := { 1..8 } 1267 SJW := { 1..4 } 1268 RESTART-MS := { 0 | NUMBER } 1269 1270Display CAN device details and statistics:: 1271 1272 $ ip -details -statistics link show can0 1273 2: can0: <NOARP,UP,LOWER_UP,ECHO> mtu 16 qdisc pfifo_fast state UP qlen 10 1274 link/can 1275 can <TRIPLE-SAMPLING> state ERROR-ACTIVE restart-ms 100 1276 bitrate 125000 sample_point 0.875 1277 tq 125 prop-seg 6 phase-seg1 7 phase-seg2 2 sjw 1 1278 sja1000: tseg1 1..16 tseg2 1..8 sjw 1..4 brp 1..64 brp-inc 1 1279 clock 8000000 1280 re-started bus-errors arbit-lost error-warn error-pass bus-off 1281 41 17457 0 41 42 41 1282 RX: bytes packets errors dropped overrun mcast 1283 140859 17608 17457 0 0 0 1284 TX: bytes packets errors dropped carrier collsns 1285 861 112 0 41 0 0 1286 1287More info to the above output: 1288 1289"<TRIPLE-SAMPLING>" 1290 Shows the list of selected CAN controller modes: LOOPBACK, 1291 LISTEN-ONLY, or TRIPLE-SAMPLING. 1292 1293"state ERROR-ACTIVE" 1294 The current state of the CAN controller: "ERROR-ACTIVE", 1295 "ERROR-WARNING", "ERROR-PASSIVE", "BUS-OFF" or "STOPPED" 1296 1297"restart-ms 100" 1298 Automatic restart delay time. If set to a non-zero value, a 1299 restart of the CAN controller will be triggered automatically 1300 in case of a bus-off condition after the specified delay time 1301 in milliseconds. By default it's off. 1302 1303"bitrate 125000 sample-point 0.875" 1304 Shows the real bit-rate in bits/sec and the sample-point in the 1305 range 0.000..0.999. If the calculation of bit-timing parameters 1306 is enabled in the kernel (CONFIG_CAN_CALC_BITTIMING=y), the 1307 bit-timing can be defined by setting the "bitrate" argument. 1308 Optionally the "sample-point" can be specified. By default it's 1309 0.000 assuming CIA-recommended sample-points. 1310 1311"tq 125 prop-seg 6 phase-seg1 7 phase-seg2 2 sjw 1" 1312 Shows the time quanta in ns, propagation segment, phase buffer 1313 segment 1 and 2 and the synchronisation jump width in units of 1314 tq. They allow to define the CAN bit-timing in a hardware 1315 independent format as proposed by the Bosch CAN 2.0 spec (see 1316 chapter 8 of http://www.semiconductors.bosch.de/pdf/can2spec.pdf). 1317 1318"sja1000: tseg1 1..16 tseg2 1..8 sjw 1..4 brp 1..64 brp-inc 1 clock 8000000" 1319 Shows the bit-timing constants of the CAN controller, here the 1320 "sja1000". The minimum and maximum values of the time segment 1 1321 and 2, the synchronisation jump width in units of tq, the 1322 bitrate pre-scaler and the CAN system clock frequency in Hz. 1323 These constants could be used for user-defined (non-standard) 1324 bit-timing calculation algorithms in user-space. 1325 1326"re-started bus-errors arbit-lost error-warn error-pass bus-off" 1327 Shows the number of restarts, bus and arbitration lost errors, 1328 and the state changes to the error-warning, error-passive and 1329 bus-off state. RX overrun errors are listed in the "overrun" 1330 field of the standard network statistics. 1331 1332Setting the CAN Bit-Timing 1333~~~~~~~~~~~~~~~~~~~~~~~~~~ 1334 1335The CAN bit-timing parameters can always be defined in a hardware 1336independent format as proposed in the Bosch CAN 2.0 specification 1337specifying the arguments "tq", "prop_seg", "phase_seg1", "phase_seg2" 1338and "sjw":: 1339 1340 $ ip link set canX type can tq 125 prop-seg 6 \ 1341 phase-seg1 7 phase-seg2 2 sjw 1 1342 1343If the kernel option CONFIG_CAN_CALC_BITTIMING is enabled, CIA 1344recommended CAN bit-timing parameters will be calculated if the bit- 1345rate is specified with the argument "bitrate":: 1346 1347 $ ip link set canX type can bitrate 125000 1348 1349Note that this works fine for the most common CAN controllers with 1350standard bit-rates but may *fail* for exotic bit-rates or CAN system 1351clock frequencies. Disabling CONFIG_CAN_CALC_BITTIMING saves some 1352space and allows user-space tools to solely determine and set the 1353bit-timing parameters. The CAN controller specific bit-timing 1354constants can be used for that purpose. They are listed by the 1355following command:: 1356 1357 $ ip -details link show can0 1358 ... 1359 sja1000: clock 8000000 tseg1 1..16 tseg2 1..8 sjw 1..4 brp 1..64 brp-inc 1 1360 1361 1362Starting and Stopping the CAN Network Device 1363~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~ 1364 1365A CAN network device is started or stopped as usual with the command 1366"ifconfig canX up/down" or "ip link set canX up/down". Be aware that 1367you *must* define proper bit-timing parameters for real CAN devices 1368before you can start it to avoid error-prone default settings:: 1369 1370 $ ip link set canX up type can bitrate 125000 1371 1372A device may enter the "bus-off" state if too many errors occurred on 1373the CAN bus. Then no more messages are received or sent. An automatic 1374bus-off recovery can be enabled by setting the "restart-ms" to a 1375non-zero value, e.g.:: 1376 1377 $ ip link set canX type can restart-ms 100 1378 1379Alternatively, the application may realize the "bus-off" condition 1380by monitoring CAN error message frames and do a restart when 1381appropriate with the command:: 1382 1383 $ ip link set canX type can restart 1384 1385Note that a restart will also create a CAN error message frame (see 1386also :ref:`socketcan-network-problem-notifications`). 1387 1388 1389.. _socketcan-can-fd-driver: 1390 1391CAN FD (Flexible Data Rate) Driver Support 1392------------------------------------------ 1393 1394CAN FD capable CAN controllers support two different bitrates for the 1395arbitration phase and the payload phase of the CAN FD frame. Therefore a 1396second bit timing has to be specified in order to enable the CAN FD bitrate. 1397 1398Additionally CAN FD capable CAN controllers support up to 64 bytes of 1399payload. The representation of this length in can_frame.len and 1400canfd_frame.len for userspace applications and inside the Linux network 1401layer is a plain value from 0 .. 64 instead of the CAN 'data length code'. 1402The data length code was a 1:1 mapping to the payload length in the Classical 1403CAN frames anyway. The payload length to the bus-relevant DLC mapping is 1404only performed inside the CAN drivers, preferably with the helper 1405functions can_fd_dlc2len() and can_fd_len2dlc(). 1406 1407The CAN netdevice driver capabilities can be distinguished by the network 1408devices maximum transfer unit (MTU):: 1409 1410 MTU = 16 (CAN_MTU) => sizeof(struct can_frame) => Classical CAN device 1411 MTU = 72 (CANFD_MTU) => sizeof(struct canfd_frame) => CAN FD capable device 1412 1413The CAN device MTU can be retrieved e.g. with a SIOCGIFMTU ioctl() syscall. 1414N.B. CAN FD capable devices can also handle and send Classical CAN frames. 1415 1416When configuring CAN FD capable CAN controllers an additional 'data' bitrate 1417has to be set. This bitrate for the data phase of the CAN FD frame has to be 1418at least the bitrate which was configured for the arbitration phase. This 1419second bitrate is specified analogue to the first bitrate but the bitrate 1420setting keywords for the 'data' bitrate start with 'd' e.g. dbitrate, 1421dsample-point, dsjw or dtq and similar settings. When a data bitrate is set 1422within the configuration process the controller option "fd on" can be 1423specified to enable the CAN FD mode in the CAN controller. This controller 1424option also switches the device MTU to 72 (CANFD_MTU). 1425 1426The first CAN FD specification presented as whitepaper at the International 1427CAN Conference 2012 needed to be improved for data integrity reasons. 1428Therefore two CAN FD implementations have to be distinguished today: 1429 1430- ISO compliant: The ISO 11898-1:2015 CAN FD implementation (default) 1431- non-ISO compliant: The CAN FD implementation following the 2012 whitepaper 1432 1433Finally there are three types of CAN FD controllers: 1434 14351. ISO compliant (fixed) 14362. non-ISO compliant (fixed, like the M_CAN IP core v3.0.1 in m_can.c) 14373. ISO/non-ISO CAN FD controllers (switchable, like the PEAK PCAN-USB FD) 1438 1439The current ISO/non-ISO mode is announced by the CAN controller driver via 1440netlink and displayed by the 'ip' tool (controller option FD-NON-ISO). 1441The ISO/non-ISO-mode can be altered by setting 'fd-non-iso {on|off}' for 1442switchable CAN FD controllers only. 1443 1444Example configuring 500 kbit/s arbitration bitrate and 4 Mbit/s data bitrate:: 1445 1446 $ ip link set can0 up type can bitrate 500000 sample-point 0.75 \ 1447 dbitrate 4000000 dsample-point 0.8 fd on 1448 $ ip -details link show can0 1449 5: can0: <NOARP,UP,LOWER_UP,ECHO> mtu 72 qdisc pfifo_fast state UNKNOWN \ 1450 mode DEFAULT group default qlen 10 1451 link/can promiscuity 0 1452 can <FD> state ERROR-ACTIVE (berr-counter tx 0 rx 0) restart-ms 0 1453 bitrate 500000 sample-point 0.750 1454 tq 50 prop-seg 14 phase-seg1 15 phase-seg2 10 sjw 1 1455 pcan_usb_pro_fd: tseg1 1..64 tseg2 1..16 sjw 1..16 brp 1..1024 \ 1456 brp-inc 1 1457 dbitrate 4000000 dsample-point 0.800 1458 dtq 12 dprop-seg 7 dphase-seg1 8 dphase-seg2 4 dsjw 1 1459 pcan_usb_pro_fd: dtseg1 1..16 dtseg2 1..8 dsjw 1..4 dbrp 1..1024 \ 1460 dbrp-inc 1 1461 clock 80000000 1462 1463Example when 'fd-non-iso on' is added on this switchable CAN FD adapter:: 1464 1465 can <FD,FD-NON-ISO> state ERROR-ACTIVE (berr-counter tx 0 rx 0) restart-ms 0 1466 1467 1468Supported CAN Hardware 1469---------------------- 1470 1471Please check the "Kconfig" file in "drivers/net/can" to get an actual 1472list of the support CAN hardware. On the SocketCAN project website 1473(see :ref:`socketcan-resources`) there might be further drivers available, also for 1474older kernel versions. 1475 1476 1477.. _socketcan-resources: 1478 1479SocketCAN Resources 1480=================== 1481 1482The Linux CAN / SocketCAN project resources (project site / mailing list) 1483are referenced in the MAINTAINERS file in the Linux source tree. 1484Search for CAN NETWORK [LAYERS|DRIVERS]. 1485 1486Credits 1487======= 1488 1489- Oliver Hartkopp (PF_CAN core, filters, drivers, bcm, SJA1000 driver) 1490- Urs Thuermann (PF_CAN core, kernel integration, socket interfaces, raw, vcan) 1491- Jan Kizka (RT-SocketCAN core, Socket-API reconciliation) 1492- Wolfgang Grandegger (RT-SocketCAN core & drivers, Raw Socket-API reviews, CAN device driver interface, MSCAN driver) 1493- Robert Schwebel (design reviews, PTXdist integration) 1494- Marc Kleine-Budde (design reviews, Kernel 2.6 cleanups, drivers) 1495- Benedikt Spranger (reviews) 1496- Thomas Gleixner (LKML reviews, coding style, posting hints) 1497- Andrey Volkov (kernel subtree structure, ioctls, MSCAN driver) 1498- Matthias Brukner (first SJA1000 CAN netdevice implementation Q2/2003) 1499- Klaus Hitschler (PEAK driver integration) 1500- Uwe Koppe (CAN netdevices with PF_PACKET approach) 1501- Michael Schulze (driver layer loopback requirement, RT CAN drivers review) 1502- Pavel Pisa (Bit-timing calculation) 1503- Sascha Hauer (SJA1000 platform driver) 1504- Sebastian Haas (SJA1000 EMS PCI driver) 1505- Markus Plessing (SJA1000 EMS PCI driver) 1506- Per Dalen (SJA1000 Kvaser PCI driver) 1507- Sam Ravnborg (reviews, coding style, kbuild help) 1508