xref: /linux/Documentation/i2c/busses/i2c-sis5595.rst (revision e7d759f31ca295d589f7420719c311870bb3166f)
1=========================
2Kernel driver i2c-sis5595
3=========================
4
5Authors:
6	- Frodo Looijaard <frodol@dds.nl>,
7        - Mark D. Studebaker <mdsxyz123@yahoo.com>,
8	- Philip Edelbrock <phil@netroedge.com>
9
10Supported adapters:
11  * Silicon Integrated Systems Corp. SiS5595 Southbridge
12    Datasheet: Publicly available at the Silicon Integrated Systems Corp. site.
13
14Note: all have mfr. ID 0x1039.
15
16   =========            ======
17   SUPPORTED            PCI ID
18   =========            ======
19        5595            0008
20   =========            ======
21
22   Note: these chips contain a 0008 device which is incompatible with the
23         5595. We recognize these by the presence of the listed
24         "blacklist" PCI ID and refuse to load.
25
26   =============        ======          ================
27   NOT SUPPORTED        PCI ID          BLACKLIST PCI ID
28   =============        ======          ================
29         540            0008            0540
30         550            0008            0550
31        5513            0008            5511
32        5581            0008            5597
33        5582            0008            5597
34        5597            0008            5597
35        5598            0008            5597/5598
36         630            0008            0630
37         645            0008            0645
38         646            0008            0646
39         648            0008            0648
40         650            0008            0650
41         651            0008            0651
42         730            0008            0730
43         735            0008            0735
44         745            0008            0745
45         746            0008            0746
46   =============        ======          ================
47
48Module Parameters
49-----------------
50
51==================	=====================================================
52force_addr=0xaddr	Set the I/O base address. Useful for boards
53			that don't set the address in the BIOS. Does not do a
54			PCI force; the device must still be present in lspci.
55			Don't use this unless the driver complains that the
56			base address is not set.
57==================	=====================================================
58
59Description
60-----------
61
62i2c-sis5595 is a true SMBus host driver for motherboards with the SiS5595
63southbridges.
64
65WARNING: If you are trying to access the integrated sensors on the SiS5595
66chip, you want the sis5595 driver for those, not this driver. This driver
67is a BUS driver, not a CHIP driver. A BUS driver is used by other CHIP
68drivers to access chips on the bus.
69