xref: /linux/Documentation/hwmon/tps53679.rst (revision a36e9f5cfe9eb3a1dce8769c7058251c42705357)
1Kernel driver tps53679
2======================
3
4Supported chips:
5
6  * Texas Instruments TPS53647
7
8    Prefix: 'tps53647'
9
10    Addresses scanned: -
11
12    Datasheet: https://www.ti.com/lit/gpn/tps53647
13
14  * Texas Instruments TPS53667
15
16    Prefix: 'tps53667'
17
18    Addresses scanned: -
19
20    Datasheet: https://www.ti.com/lit/gpn/TPS53667
21
22  * Texas Instruments TPS53676
23
24    Prefix: 'tps53676'
25
26    Addresses scanned: -
27
28    Datasheet: https://www.ti.com/lit/gpn/TPS53676
29
30  * Texas Instruments TPS53679
31
32    Prefix: 'tps53679'
33
34    Addresses scanned: -
35
36    Datasheet: https://www.ti.com/lit/gpn/TPS53679 (short version)
37
38  * Texas Instruments TPS53681
39
40    Prefix: 'tps53681'
41
42    Addresses scanned: -
43
44    Datasheet: https://www.ti.com/lit/gpn/TPS53681
45
46  * Texas Instruments TPS53688
47
48    Prefix: 'tps53688'
49
50    Addresses scanned: -
51
52    Datasheet: Available under NDA
53
54
55Authors:
56	Vadim Pasternak <vadimp@mellanox.com>
57	Guenter Roeck <linux@roeck-us.net>
58
59
60Description
61-----------
62
63Chips in this series are multi-phase step-down converters with one or two
64output channels and up to 8 phases per channel.
65
66
67Usage Notes
68-----------
69
70This driver does not probe for PMBus devices. You will have to instantiate
71devices explicitly.
72
73Example: the following commands will load the driver for an TPS53681 at address
740x60 on I2C bus #1::
75
76	# modprobe tps53679
77	# echo tps53681 0x60 > /sys/bus/i2c/devices/i2c-1/new_device
78
79
80Sysfs attributes
81----------------
82
83======================= ========================================================
84in1_label		"vin"
85
86in1_input		Measured input voltage.
87
88in1_lcrit		Critical minimum input voltage
89
90			TPS53679, TPS53681, TPS53688 only.
91
92in1_lcrit_alarm		Input voltage critical low alarm.
93
94			TPS53679, TPS53681, TPS53688 only.
95
96in1_crit		Critical maximum input voltage.
97
98in1_crit_alarm		Input voltage critical high alarm.
99
100in[N]_label		"vout[1-2]"
101
102			- TPS53647, TPS53667: N=2
103			- TPS53679, TPS53588: N=2,3
104
105in[N]_input		Measured output voltage.
106
107in[N]_lcrit		Critical minimum input voltage.
108
109			TPS53679, TPS53681, TPS53688 only.
110
111in[N]_lcrit_alarm	Critical minimum voltage alarm.
112
113			TPS53679, TPS53681, TPS53688 only.
114
115in[N]_alarm		Output voltage alarm.
116
117			TPS53647, TPS53667 only.
118
119in[N]_crit		Critical maximum output voltage.
120
121			TPS53679, TPS53681, TPS53688 only.
122
123in[N]_crit_alarm	Output voltage critical high alarm.
124
125			TPS53679, TPS53681, TPS53688 only.
126
127temp[N]_input		Measured temperature.
128
129			- TPS53647, TPS53667: N=1
130			- TPS53679, TPS53681, TPS53588: N=1,2
131
132temp[N]_max		Maximum temperature.
133
134temp[N]_crit		Critical high temperature.
135
136temp[N]_max_alarm	Temperature high alarm.
137
138temp[N]_crit_alarm	Temperature critical high alarm.
139
140power1_label		"pin".
141
142power1_input		Measured input power.
143
144power[N]_label		"pout[1-2]".
145
146			- TPS53647, TPS53667: N=2
147			- TPS53676, TPS53679, TPS53681, TPS53588: N=2,3
148
149power[N]_input		Measured output power.
150
151curr1_label		"iin".
152
153curr1_input		Measured input current.
154
155curr1_max		Maximum input current.
156
157curr1_max_alarm		Input current high alarm.
158
159curr1_crit		Critical input current.
160
161curr1_crit_alarm	Input current critical alarm.
162
163curr[N]_label		"iout[1-2]" or "iout1.[0-5]".
164
165			The first digit is the output channel, the second
166			digit is the phase within the channel. Per-phase
167			telemetry supported on TPS53676 and TPS53681 only.
168
169			- TPS53647, TPS53667: N=2
170			- TPS53679, TPS53588: N=2,3
171			- TPS53676: N=2-8
172			- TPS53681: N=2-9
173
174curr[N]_input		Measured output current.
175
176curr[N]_max		Maximum output current.
177
178curr[N]_crit		Critical high output current.
179
180curr[N]_max_alarm	Output current high alarm.
181
182curr[N]_crit_alarm	Output current critical high alarm.
183
184			Limit and alarm attributes are only available for
185			non-phase telemetry (iout1, iout2).
186
187======================= ========================================================
188