1.. SPDX-License-Identifier: GPL-2.0 2 3Kernel driver pli1209bc 4======================= 5 6Supported chips: 7 8 * Digital Supervisor PLI1209BC 9 10 Prefix: 'pli1209bc' 11 12 Addresses scanned: 0x50 - 0x5F 13 14 Datasheet: https://www.vicorpower.com/documents/datasheets/ds-PLI1209BCxyzz-VICOR.pdf 15 16Authors: 17 - Marcello Sylvester Bauer <sylv@sylv.io> 18 19Description 20----------- 21 22The Vicor PLI1209BC is an isolated digital power system supervisor that provides 23a communication interface between a host processor and one Bus Converter Module 24(BCM). The PLI communicates with a system controller via a PMBus compatible 25interface over an isolated UART interface. Through the PLI, the host processor 26can configure, set protection limits, and monitor the BCM. 27 28Sysfs entries 29------------- 30 31======================= ======================================================== 32in1_label "vin2" 33in1_input Input voltage. 34in1_rated_min Minimum rated input voltage. 35in1_rated_max Maximum rated input voltage. 36in1_max Maximum input voltage. 37in1_max_alarm Input voltage high alarm. 38in1_crit Critical input voltage. 39in1_crit_alarm Input voltage critical alarm. 40 41in2_label "vout2" 42in2_input Output voltage. 43in2_rated_min Minimum rated output voltage. 44in2_rated_max Maximum rated output voltage. 45in2_alarm Output voltage alarm 46 47curr1_label "iin2" 48curr1_input Input current. 49curr1_max Maximum input current. 50curr1_max_alarm Maximum input current high alarm. 51curr1_crit Critical input current. 52curr1_crit_alarm Input current critical alarm. 53 54curr2_label "iout2" 55curr2_input Output current. 56curr2_crit Critical output current. 57curr2_crit_alarm Output current critical alarm. 58curr2_max Maximum output current. 59curr2_max_alarm Output current high alarm. 60 61power1_label "pin2" 62power1_input Input power. 63power1_alarm Input power alarm. 64 65power2_label "pout2" 66power2_input Output power. 67power2_rated_max Maximum rated output power. 68 69temp1_input Die temperature. 70temp1_alarm Die temperature alarm. 71temp1_max Maximum die temperature. 72temp1_max_alarm Die temperature high alarm. 73temp1_crit Critical die temperature. 74temp1_crit_alarm Die temperature critical alarm. 75======================= ======================================================== 76