xref: /linux/Documentation/hwmon/mc34vr500.rst (revision a66c9147916fefc66dba06236ff5307180d95cd4)
1.. SPDX-License-Identifier: GPL-2.0-or-later
2
3Kernel driver mc34vr500
4=======================
5
6Supported Chips:
7
8  * NXP MC34VR500
9
10    Prefix: 'mc34vr500'
11
12    Datasheet: https://www.nxp.com/docs/en/data-sheet/MC34VR500.pdf
13
14Author: Mario Kicherer <dev@kicherer.org>
15
16Description
17-----------
18
19This driver implements initial support for the NXP MC34VR500 PMIC. The MC34VR500
20monitors the temperature, input voltage and output currents and provides
21corresponding alarms. For the temperature, the chip can send interrupts if
22the temperature rises above one of the following values: 110°, 120°, 125° and
23130° Celsius. For the input voltage, an interrupt is sent when the voltage
24drops below 2.8V.
25
26Currently, this driver only implements the input voltage and temperature
27alarms. The interrupts are mapped as follows:
28
29<= 2.8V  -> in0_min_alarm
30>110°c   -> temp1_max_alarm
31>120°c   -> temp1_crit_alarm
32>130°c   -> temp1_emergency_alarm
33