1Kernel driver max16064 2====================== 3 4Supported chips: 5 6 * Maxim MAX16064 7 8 Prefix: 'max16064' 9 10 Addresses scanned: - 11 12 Datasheet: http://datasheets.maxim-ic.com/en/ds/MAX16064.pdf 13 14Author: Guenter Roeck <linux@roeck-us.net> 15 16 17Description 18----------- 19 20This driver supports hardware monitoring for Maxim MAX16064 Quad Power-Supply 21Controller with Active-Voltage Output Control and PMBus Interface. 22 23The driver is a client driver to the core PMBus driver. 24Please see Documentation/hwmon/pmbus.rst for details on PMBus client drivers. 25 26 27Usage Notes 28----------- 29 30This driver does not auto-detect devices. You will have to instantiate the 31devices explicitly. Please see Documentation/i2c/instantiating-devices.rst for 32details. 33 34 35Platform data support 36--------------------- 37 38The driver supports standard PMBus driver platform data. 39 40 41Sysfs entries 42------------- 43 44The following attributes are supported. Limits are read-write; all other 45attributes are read-only. 46 47======================= ======================================================== 48in[1-4]_label "vout[1-4]" 49in[1-4]_input Measured voltage. From READ_VOUT register. 50in[1-4]_min Minimum Voltage. From VOUT_UV_WARN_LIMIT register. 51in[1-4]_max Maximum voltage. From VOUT_OV_WARN_LIMIT register. 52in[1-4]_lcrit Critical minimum Voltage. VOUT_UV_FAULT_LIMIT register. 53in[1-4]_crit Critical maximum voltage. From VOUT_OV_FAULT_LIMIT 54 register. 55in[1-4]_min_alarm Voltage low alarm. From VOLTAGE_UV_WARNING status. 56in[1-4]_max_alarm Voltage high alarm. From VOLTAGE_OV_WARNING status. 57in[1-4]_lcrit_alarm Voltage critical low alarm. From VOLTAGE_UV_FAULT 58 status. 59in[1-4]_crit_alarm Voltage critical high alarm. From VOLTAGE_OV_FAULT 60 status. 61in[1-4]_highest Historical maximum voltage. 62in[1-4]_reset_history Write any value to reset history. 63 64temp1_input Measured temperature. From READ_TEMPERATURE_1 register. 65temp1_max Maximum temperature. From OT_WARN_LIMIT register. 66temp1_crit Critical high temperature. From OT_FAULT_LIMIT register. 67temp1_max_alarm Chip temperature high alarm. Set by comparing 68 READ_TEMPERATURE_1 with OT_WARN_LIMIT if TEMP_OT_WARNING 69 status is set. 70temp1_crit_alarm Chip temperature critical high alarm. Set by comparing 71 READ_TEMPERATURE_1 with OT_FAULT_LIMIT if TEMP_OT_FAULT 72 status is set. 73temp1_highest Historical maximum temperature. 74temp1_reset_history Write any value to reset history. 75======================= ======================================================== 76