1Kernel driver hih6130 2===================== 3 4Supported chips: 5 6 * Honeywell HIH-6130 / HIH-6131 7 8 Prefix: 'hih6130' 9 10 Addresses scanned: none 11 12 Datasheet: Publicly available at the Honeywell website 13 14 http://sensing.honeywell.com/index.php?ci_id=3106&la_id=1&defId=44872 15 16Author: 17 Iain Paton <ipaton0@gmail.com> 18 19Description 20----------- 21 22The HIH-6130 & HIH-6131 are humidity and temperature sensors in a SO8 package. 23The difference between the two devices is that the HIH-6131 has a condensation 24filter. 25 26The devices communicate with the I2C protocol. All sensors are set to the same 27I2C address 0x27 by default, so an entry with I2C_BOARD_INFO("hih6130", 0x27) 28can be used in the board setup code. 29 30Please see Documentation/i2c/instantiating-devices.rst for details on how to 31instantiate I2C devices. 32 33sysfs-Interface 34--------------- 35 36temp1_input 37 temperature input 38 39humidity1_input 40 humidity input 41 42Notes 43----- 44 45Command mode and alarms are not currently supported. 46