xref: /linux/Documentation/hwmon/g760a.rst (revision 8e07e0e3964ca4e23ce7b68e2096fe660a888942)
1Kernel driver g760a
2===================
3
4Supported chips:
5
6  * Global Mixed-mode Technology Inc. G760A
7
8    Prefix: 'g760a'
9
10    Datasheet: Publicly available at the GMT website
11
12      http://www.gmt.com.tw/product/datasheet/EDS-760A.pdf
13
14Author: Herbert Valerio Riedel <hvr@gnu.org>
15
16Description
17-----------
18
19The GMT G760A Fan Speed PWM Controller is connected directly to a fan
20and performs closed-loop control of the fan speed.
21
22The fan speed is programmed by setting the period via 'pwm1' of two
23consecutive speed pulses. The period is defined in terms of clock
24cycle counts of an assumed 32kHz clock source.
25
26Setting a period of 0 stops the fan; setting the period to 255 sets
27fan to maximum speed.
28
29The measured fan rotation speed returned via 'fan1_input' is derived
30from the measured speed pulse period by assuming again a 32kHz clock
31source and a 2 pulse-per-revolution fan.
32
33The 'alarms' file provides access to the two alarm bits provided by
34the G760A chip's status register: Bit 0 is set when the actual fan
35speed differs more than 20% with respect to the programmed fan speed;
36bit 1 is set when fan speed is below 1920 RPM.
37
38The g760a driver will not update its values more frequently than every
39other second; reading them more often will do no harm, but will return
40'old' values.
41