1Kernel driver fam15h_power 2========================== 3 4Supported chips: 5 6* AMD Family 15h Processors 7 8* AMD Family 16h Processors 9 10 Prefix: 'fam15h_power' 11 12 Addresses scanned: PCI space 13 14 Datasheets: 15 16 - BIOS and Kernel Developer's Guide (BKDG) For AMD Family 15h Processors 17 - BIOS and Kernel Developer's Guide (BKDG) For AMD Family 16h Processors 18 - AMD64 Architecture Programmer's Manual Volume 2: System Programming 19 20Author: Andreas Herrmann <herrmann.der.user@googlemail.com> 21 22Description 23----------- 24 251) Processor TDP (Thermal design power) 26 27Given a fixed frequency and voltage, the power consumption of a 28processor varies based on the workload being executed. Derated power 29is the power consumed when running a specific application. Thermal 30design power (TDP) is an example of derated power. 31 32This driver permits reading of registers providing power information 33of AMD Family 15h and 16h processors via TDP algorithm. 34 35For AMD Family 15h and 16h processors the following power values can 36be calculated using different processor northbridge function 37registers: 38 39* BasePwrWatts: 40 Specifies in watts the maximum amount of power 41 consumed by the processor for NB and logic external to the core. 42 43* ProcessorPwrWatts: 44 Specifies in watts the maximum amount of power 45 the processor can support. 46* CurrPwrWatts: 47 Specifies in watts the current amount of power being 48 consumed by the processor. 49 50This driver provides ProcessorPwrWatts and CurrPwrWatts: 51 52* power1_crit (ProcessorPwrWatts) 53* power1_input (CurrPwrWatts) 54 55On multi-node processors the calculated value is for the entire 56package and not for a single node. Thus the driver creates sysfs 57attributes only for internal node0 of a multi-node processor. 58 592) Accumulated Power Mechanism 60 61This driver also introduces an algorithm that should be used to 62calculate the average power consumed by a processor during a 63measurement interval Tm. The feature of accumulated power mechanism is 64indicated by CPUID Fn8000_0007_EDX[12]. 65 66* Tsample: 67 compute unit power accumulator sample period 68 69* Tref: 70 the PTSC counter period 71 72* PTSC: 73 performance timestamp counter 74 75* N: 76 the ratio of compute unit power accumulator sample period to the 77 PTSC period 78 79* Jmax: 80 max compute unit accumulated power which is indicated by 81 MaxCpuSwPwrAcc MSR C001007b 82 83* Jx/Jy: 84 compute unit accumulated power which is indicated by 85 CpuSwPwrAcc MSR C001007a 86* Tx/Ty: 87 the value of performance timestamp counter which is indicated 88 by CU_PTSC MSR C0010280 89 90* PwrCPUave: 91 CPU average power 92 93i. Determine the ratio of Tsample to Tref by executing CPUID Fn8000_0007. 94 95 N = value of CPUID Fn8000_0007_ECX[CpuPwrSampleTimeRatio[15:0]]. 96 97ii. Read the full range of the cumulative energy value from the new 98 MSR MaxCpuSwPwrAcc. 99 100 Jmax = value returned. 101 102iii. At time x, SW reads CpuSwPwrAcc MSR and samples the PTSC. 103 104 Jx = value read from CpuSwPwrAcc and Tx = value read from PTSC. 105 106iv. At time y, SW reads CpuSwPwrAcc MSR and samples the PTSC. 107 108 Jy = value read from CpuSwPwrAcc and Ty = value read from PTSC. 109 110v. Calculate the average power consumption for a compute unit over 111 time period (y-x). Unit of result is uWatt:: 112 113 if (Jy < Jx) // Rollover has occurred 114 Jdelta = (Jy + Jmax) - Jx 115 else 116 Jdelta = Jy - Jx 117 PwrCPUave = N * Jdelta * 1000 / (Ty - Tx) 118 119This driver provides PwrCPUave and interval(default is 10 millisecond 120and maximum is 1 second): 121 122* power1_average (PwrCPUave) 123* power1_average_interval (Interval) 124 125The power1_average_interval can be updated at /etc/sensors3.conf file 126as below: 127 128chip `fam15h_power-*` 129 set power1_average_interval 0.01 130 131Then save it with "sensors -s". 132