1.. SPDX-License-Identifier: GPL-2.0-or-later 2 3Kernel driver corsair-psu 4========================= 5 6Supported devices: 7 8* Corsair Power Supplies 9 10 Corsair HX550i 11 12 Corsair HX650i 13 14 Corsair HX750i 15 16 Corsair HX850i 17 18 Corsair HX1000i (Series 2022 and 2023) 19 20 Corsair HX1200i 21 22 Corsair HX1500i (Series 2022 and 2023) 23 24 Corsair RM550i 25 26 Corsair RM650i 27 28 Corsair RM750i 29 30 Corsair RM850i 31 32 Corsair RM1000i 33 34Author: Wilken Gottwalt 35 36Description 37----------- 38 39This driver implements the sysfs interface for the Corsair PSUs with a HID protocol 40interface of the HXi and RMi series. 41These power supplies provide access to a micro-controller with 2 attached 42temperature sensors, 1 fan rpm sensor, 4 sensors for volt levels, 4 sensors for 43power usage and 4 sensors for current levels and additional non-sensor information 44like uptimes. 45 46Sysfs entries 47------------- 48 49======================= ======================================================== 50curr1_input Total current usage 51curr2_input Current on the 12v psu rail 52curr2_crit Current max critical value on the 12v psu rail 53curr3_input Current on the 5v psu rail 54curr3_crit Current max critical value on the 5v psu rail 55curr4_input Current on the 3.3v psu rail 56curr4_crit Current max critical value on the 3.3v psu rail 57fan1_input RPM of psu fan 58in0_input Voltage of the psu ac input 59in1_input Voltage of the 12v psu rail 60in1_crit Voltage max critical value on the 12v psu rail 61in1_lcrit Voltage min critical value on the 12v psu rail 62in2_input Voltage of the 5v psu rail 63in2_crit Voltage max critical value on the 5v psu rail 64in2_lcrit Voltage min critical value on the 5v psu rail 65in3_input Voltage of the 3.3v psu rail 66in3_crit Voltage max critical value on the 3.3v psu rail 67in3_lcrit Voltage min critical value on the 3.3v psu rail 68power1_input Total power usage 69power2_input Power usage of the 12v psu rail 70power3_input Power usage of the 5v psu rail 71power4_input Power usage of the 3.3v psu rail 72pwm1 PWM value, read only 73pwm1_enable PWM mode, read only 74temp1_input Temperature of the psu vrm component 75temp1_crit Temperature max cirtical value of the psu vrm component 76temp2_input Temperature of the psu case 77temp2_crit Temperature max critical value of psu case 78======================= ======================================================== 79 80Usage Notes 81----------- 82 83It is an USB HID device, so it is auto-detected, supports hot-swapping and 84several devices at once. 85 86Flickering values in the rail voltage levels can be an indicator for a failing 87PSU. Accordingly to the default automatic fan speed plan the fan starts at about 8830% of the wattage rating. If this does not happen, a fan failure is likely. The 89driver also provides some additional useful values via debugfs, which do not fit 90into the hwmon class. 91 92Debugfs entries 93--------------- 94 95======================= ======================================================== 96ocpmode Single or multi rail mode of the PCIe power connectors 97product Product name of the psu 98uptime Session uptime of the psu 99uptime_total Total uptime of the psu 100vendor Vendor name of the psu 101======================= ======================================================== 102