1.. SPDX-License-Identifier: GPL-2.0 2 3Kernel driver bpa-rs600 4======================= 5 6Supported chips: 7 8 * BPA-RS600-120 9 10 Datasheet: Publicly available at the BluTek website 11 http://blutekpower.com/wp-content/uploads/2019/01/BPA-RS600-120-07-19-2018.pdf 12 13Authors: 14 - Chris Packham <chris.packham@alliedtelesis.co.nz> 15 16Description 17----------- 18 19The BPA-RS600 is a compact 600W removable power supply module. 20 21Usage Notes 22----------- 23 24This driver does not probe for PMBus devices. You will have to instantiate 25devices explicitly. 26 27Sysfs attributes 28---------------- 29 30======================= ============================================ 31curr1_label "iin" 32curr1_input Measured input current 33curr1_max Maximum input current 34curr1_max_alarm Input current high alarm 35 36curr2_label "iout1" 37curr2_input Measured output current 38curr2_max Maximum output current 39curr2_max_alarm Output current high alarm 40 41fan1_input Measured fan speed 42fan1_alarm Fan warning 43fan1_fault Fan fault 44 45in1_label "vin" 46in1_input Measured input voltage 47in1_max Maximum input voltage 48in1_max_alarm Input voltage high alarm 49in1_min Minimum input voltage 50in1_min_alarm Input voltage low alarm 51 52in2_label "vout1" 53in2_input Measured output voltage 54in2_max Maximum output voltage 55in2_max_alarm Output voltage high alarm 56in2_min Maximum output voltage 57in2_min_alarm Output voltage low alarm 58 59power1_label "pin" 60power1_input Measured input power 61power1_alarm Input power alarm 62power1_max Maximum input power 63 64power2_label "pout1" 65power2_input Measured output power 66power2_max Maximum output power 67power2_max_alarm Output power high alarm 68 69temp1_input Measured temperature around input connector 70temp1_alarm Temperature alarm 71 72temp2_input Measured temperature around output connector 73temp2_alarm Temperature alarm 74======================= ============================================ 75