xref: /linux/Documentation/gpu/amdgpu/display/dcn-overview.rst (revision 063565aca3734de4e73639a0e460a58d9418b3cd)
1=======================
2Display Core Next (DCN)
3=======================
4
5To equip our readers with the basic knowledge of how AMD Display Core Next
6(DCN) works, we need to start with an overview of the hardware pipeline. Below
7you can see a picture that provides a DCN overview, keep in mind that this is a
8generic diagram, and we have variations per ASIC.
9
10.. kernel-figure:: dc_pipeline_overview.svg
11
12Based on this diagram, we can pass through each block and briefly describe
13them:
14
15* **Display Controller Hub (DCHUB)**: This is the gateway between the Scalable
16  Data Port (SDP) and DCN. This component has multiple features, such as memory
17  arbitration, rotation, and cursor manipulation.
18
19* **Display Pipe and Plane (DPP)**: This block provides pre-blend pixel
20  processing such as color space conversion, linearization of pixel data, tone
21  mapping, and gamut mapping.
22
23* **Multiple Pipe/Plane Combined (MPC)**: This component performs blending of
24  multiple planes, using global or per-pixel alpha.
25
26* **Output Pixel Processing (OPP)**: Process and format pixels to be sent to
27  the display.
28
29* **Output Pipe Timing Combiner (OPTC)**: It generates time output to combine
30  streams or divide capabilities. CRC values are generated in this block.
31
32* **Display Output (DIO)**: Codify the output to the display connected to our
33  GPU.
34
35* **Display Writeback (DWB)**: It provides the ability to write the output of
36  the display pipe back to memory as video frames.
37
38* **Multi-Media HUB (MMHUBBUB)**: Memory controller interface for DMCUB and DWB
39  (Note that DWB is not hooked yet).
40
41* **DCN Management Unit (DMU)**: It provides registers with access control and
42  interrupts the controller to the SOC host interrupt unit. This block includes
43  the Display Micro-Controller Unit - version B (DMCUB), which is handled via
44  firmware.
45
46* **DCN Clock Generator Block (DCCG)**: It provides the clocks and resets
47  for all of the display controller clock domains.
48
49* **Azalia (AZ)**: Audio engine.
50
51The above diagram is an architecture generalization of DCN, which means that
52every ASIC has variations around this base model. Notice that the display
53pipeline is connected to the Scalable Data Port (SDP) via DCHUB; you can see
54the SDP as the element from our Data Fabric that feeds the display pipe.
55
56Always approach the DCN architecture as something flexible that can be
57configured and reconfigured in multiple ways; in other words, each block can be
58setup or ignored accordingly with userspace demands. For example, if we
59want to drive an 8k@60Hz with a DSC enabled, our DCN may require 4 DPP and 2
60OPP. It is DC's responsibility to drive the best configuration for each
61specific scenario. Orchestrate all of these components together requires a
62sophisticated communication interface which is highlighted in the diagram by
63the edges that connect each block; from the chart, each connection between
64these blocks represents:
65
661. Pixel data interface (red): Represents the pixel data flow;
672. Global sync signals (green): It is a set of synchronization signals composed
68   by VStartup, VUpdate, and VReady;
693. Config interface: Responsible to configure blocks;
704. Sideband signals: All other signals that do not fit the previous one.
71
72These signals are essential and play an important role in DCN. Nevertheless,
73the Global Sync deserves an extra level of detail described in the next
74section.
75
76All of these components are represented by a data structure named dc_state.
77From DCHUB to MPC, we have a representation called dc_plane; from MPC to OPTC,
78we have dc_stream, and the output (DIO) is handled by dc_link. Keep in mind
79that HUBP accesses a surface using a specific format read from memory, and our
80dc_plane should work to convert all pixels in the plane to something that can
81be sent to the display via dc_stream and dc_link.
82
83Front End and Back End
84----------------------
85
86Display pipeline can be broken down into two components that are usually
87referred as **Front End (FE)** and **Back End (BE)**, where FE consists of:
88
89* DCHUB (Mainly referring to a subcomponent named HUBP)
90* DPP
91* MPC
92
93On the other hand, BE consist of
94
95* OPP
96* OPTC
97* DIO (DP/HDMI stream encoder and link encoder)
98
99OPP and OPTC are two joining blocks between FE and BE. On a side note, this is
100a one-to-one mapping of the link encoder to PHY, but we can configure the DCN
101to choose which link encoder to connect to which PHY. FE's main responsibility
102is to change, blend and compose pixel data, while BE's job is to frame a
103generic pixel stream to a specific display's pixel stream.
104
105Data Flow
106---------
107
108Initially, data is passed in from VRAM through Data Fabric (DF) in native pixel
109formats. Such data format stays through till HUBP in DCHUB, where HUBP unpacks
110different pixel formats and outputs them to DPP in uniform streams through 4
111channels (1 for alpha + 3 for colors).
112
113The Converter and Cursor (CNVC) in DPP would then normalize the data
114representation and convert them to a DCN specific floating-point format (i.e.,
115different from the IEEE floating-point format). In the process, CNVC also
116applies a degamma function to transform the data from non-linear to linear
117space to relax the floating-point calculations following. Data would stay in
118this floating-point format from DPP to OPP.
119
120Starting OPP, because color transformation and blending have been completed
121(i.e alpha can be dropped), and the end sinks do not require the precision and
122dynamic range that floating points provide (i.e. all displays are in integer
123depth format), bit-depth reduction/dithering would kick in. In OPP, we would
124also apply a regamma function to introduce the gamma removed earlier back.
125Eventually, we output data in integer format at DIO.
126
127Global Sync
128-----------
129
130Many DCN registers are double buffered, most importantly the surface address.
131This allows us to update DCN hardware atomically for page flips, as well as
132for most other updates that don't require enabling or disabling of new pipes.
133
134(Note: There are many scenarios when DC will decide to reserve extra pipes
135in order to support outputs that need a very high pixel clock, or for
136power saving purposes.)
137
138These atomic register updates are driven by global sync signals in DCN. In
139order to understand how atomic updates interact with DCN hardware, and how DCN
140signals page flip and vblank events it is helpful to understand how global sync
141is programmed.
142
143Global sync consists of three signals, VSTARTUP, VUPDATE, and VREADY. These are
144calculated by the Display Mode Library - DML (drivers/gpu/drm/amd/display/dc/dml)
145based on a large number of parameters and ensure our hardware is able to feed
146the DCN pipeline without underflows or hangs in any given system configuration.
147The global sync signals always happen during VBlank, are independent from the
148VSync signal, and do not overlap each other.
149
150VUPDATE is the only signal that is of interest to the rest of the driver stack
151or userspace clients as it signals the point at which hardware latches to
152atomically programmed (i.e. double buffered) registers. Even though it is
153independent of the VSync signal we use VUPDATE to signal the VSync event as it
154provides the best indication of how atomic commits and hardware interact.
155
156Since DCN hardware is double-buffered the DC driver is able to program the
157hardware at any point during the frame.
158
159The below picture illustrates the global sync signals:
160
161.. kernel-figure:: global_sync_vblank.svg
162
163These signals affect core DCN behavior. Programming them incorrectly will lead
164to a number of negative consequences, most of them quite catastrophic.
165
166The following picture shows how global sync allows for a mailbox style of
167updates, i.e. it allows for multiple re-configurations between VUpdate
168events where only the last configuration programmed before the VUpdate signal
169becomes effective.
170
171.. kernel-figure:: config_example.svg
172