1.. SPDX-License-Identifier: GPL-2.0 2 3==================================================================== 4Miscellaneous Device control operations for the autofs kernel module 5==================================================================== 6 7The problem 8=========== 9 10There is a problem with active restarts in autofs (that is to say 11restarting autofs when there are busy mounts). 12 13During normal operation autofs uses a file descriptor opened on the 14directory that is being managed in order to be able to issue control 15operations. Using a file descriptor gives ioctl operations access to 16autofs specific information stored in the super block. The operations 17are things such as setting an autofs mount catatonic, setting the 18expire timeout and requesting expire checks. As is explained below, 19certain types of autofs triggered mounts can end up covering an autofs 20mount itself which prevents us being able to use open(2) to obtain a 21file descriptor for these operations if we don't already have one open. 22 23Currently autofs uses "umount -l" (lazy umount) to clear active mounts 24at restart. While using lazy umount works for most cases, anything that 25needs to walk back up the mount tree to construct a path, such as 26getcwd(2) and the proc file system /proc/<pid>/cwd, no longer works 27because the point from which the path is constructed has been detached 28from the mount tree. 29 30The actual problem with autofs is that it can't reconnect to existing 31mounts. Immediately one thinks of just adding the ability to remount 32autofs file systems would solve it, but alas, that can't work. This is 33because autofs direct mounts and the implementation of "on demand mount 34and expire" of nested mount trees have the file system mounted directly 35on top of the mount trigger directory dentry. 36 37For example, there are two types of automount maps, direct (in the kernel 38module source you will see a third type called an offset, which is just 39a direct mount in disguise) and indirect. 40 41Here is a master map with direct and indirect map entries:: 42 43 /- /etc/auto.direct 44 /test /etc/auto.indirect 45 46and the corresponding map files:: 47 48 /etc/auto.direct: 49 50 /automount/dparse/g6 budgie:/autofs/export1 51 /automount/dparse/g1 shark:/autofs/export1 52 and so on. 53 54/etc/auto.indirect:: 55 56 g1 shark:/autofs/export1 57 g6 budgie:/autofs/export1 58 and so on. 59 60For the above indirect map an autofs file system is mounted on /test and 61mounts are triggered for each sub-directory key by the inode lookup 62operation. So we see a mount of shark:/autofs/export1 on /test/g1, for 63example. 64 65The way that direct mounts are handled is by making an autofs mount on 66each full path, such as /automount/dparse/g1, and using it as a mount 67trigger. So when we walk on the path we mount shark:/autofs/export1 "on 68top of this mount point". Since these are always directories we can 69use the follow_link inode operation to trigger the mount. 70 71But, each entry in direct and indirect maps can have offsets (making 72them multi-mount map entries). 73 74For example, an indirect mount map entry could also be:: 75 76 g1 \ 77 / shark:/autofs/export5/testing/test \ 78 /s1 shark:/autofs/export/testing/test/s1 \ 79 /s2 shark:/autofs/export5/testing/test/s2 \ 80 /s1/ss1 shark:/autofs/export1 \ 81 /s2/ss2 shark:/autofs/export2 82 83and a similarly a direct mount map entry could also be:: 84 85 /automount/dparse/g1 \ 86 / shark:/autofs/export5/testing/test \ 87 /s1 shark:/autofs/export/testing/test/s1 \ 88 /s2 shark:/autofs/export5/testing/test/s2 \ 89 /s1/ss1 shark:/autofs/export2 \ 90 /s2/ss2 shark:/autofs/export2 91 92One of the issues with version 4 of autofs was that, when mounting an 93entry with a large number of offsets, possibly with nesting, we needed 94to mount and umount all of the offsets as a single unit. Not really a 95problem, except for people with a large number of offsets in map entries. 96This mechanism is used for the well known "hosts" map and we have seen 97cases (in 2.4) where the available number of mounts are exhausted or 98where the number of privileged ports available is exhausted. 99 100In version 5 we mount only as we go down the tree of offsets and 101similarly for expiring them which resolves the above problem. There is 102somewhat more detail to the implementation but it isn't needed for the 103sake of the problem explanation. The one important detail is that these 104offsets are implemented using the same mechanism as the direct mounts 105above and so the mount points can be covered by a mount. 106 107The current autofs implementation uses an ioctl file descriptor opened 108on the mount point for control operations. The references held by the 109descriptor are accounted for in checks made to determine if a mount is 110in use and is also used to access autofs file system information held 111in the mount super block. So the use of a file handle needs to be 112retained. 113 114 115The Solution 116============ 117 118To be able to restart autofs leaving existing direct, indirect and 119offset mounts in place we need to be able to obtain a file handle 120for these potentially covered autofs mount points. Rather than just 121implement an isolated operation it was decided to re-implement the 122existing ioctl interface and add new operations to provide this 123functionality. 124 125In addition, to be able to reconstruct a mount tree that has busy mounts, 126the uid and gid of the last user that triggered the mount needs to be 127available because these can be used as macro substitution variables in 128autofs maps. They are recorded at mount request time and an operation 129has been added to retrieve them. 130 131Since we're re-implementing the control interface, a couple of other 132problems with the existing interface have been addressed. First, when 133a mount or expire operation completes a status is returned to the 134kernel by either a "send ready" or a "send fail" operation. The 135"send fail" operation of the ioctl interface could only ever send 136ENOENT so the re-implementation allows user space to send an actual 137status. Another expensive operation in user space, for those using 138very large maps, is discovering if a mount is present. Usually this 139involves scanning /proc/mounts and since it needs to be done quite 140often it can introduce significant overhead when there are many entries 141in the mount table. An operation to lookup the mount status of a mount 142point dentry (covered or not) has also been added. 143 144Current kernel development policy recommends avoiding the use of the 145ioctl mechanism in favor of systems such as Netlink. An implementation 146using this system was attempted to evaluate its suitability and it was 147found to be inadequate, in this case. The Generic Netlink system was 148used for this as raw Netlink would lead to a significant increase in 149complexity. There's no question that the Generic Netlink system is an 150elegant solution for common case ioctl functions but it's not a complete 151replacement probably because its primary purpose in life is to be a 152message bus implementation rather than specifically an ioctl replacement. 153While it would be possible to work around this there is one concern 154that lead to the decision to not use it. This is that the autofs 155expire in the daemon has become far to complex because umount 156candidates are enumerated, almost for no other reason than to "count" 157the number of times to call the expire ioctl. This involves scanning 158the mount table which has proved to be a big overhead for users with 159large maps. The best way to improve this is try and get back to the 160way the expire was done long ago. That is, when an expire request is 161issued for a mount (file handle) we should continually call back to 162the daemon until we can't umount any more mounts, then return the 163appropriate status to the daemon. At the moment we just expire one 164mount at a time. A Generic Netlink implementation would exclude this 165possibility for future development due to the requirements of the 166message bus architecture. 167 168 169autofs Miscellaneous Device mount control interface 170==================================================== 171 172The control interface is opening a device node, typically /dev/autofs. 173 174All the ioctls use a common structure to pass the needed parameter 175information and return operation results:: 176 177 struct autofs_dev_ioctl { 178 __u32 ver_major; 179 __u32 ver_minor; 180 __u32 size; /* total size of data passed in 181 * including this struct */ 182 __s32 ioctlfd; /* automount command fd */ 183 184 /* Command parameters */ 185 union { 186 struct args_protover protover; 187 struct args_protosubver protosubver; 188 struct args_openmount openmount; 189 struct args_ready ready; 190 struct args_fail fail; 191 struct args_setpipefd setpipefd; 192 struct args_timeout timeout; 193 struct args_requester requester; 194 struct args_expire expire; 195 struct args_askumount askumount; 196 struct args_ismountpoint ismountpoint; 197 }; 198 199 char path[]; 200 }; 201 202The ioctlfd field is a mount point file descriptor of an autofs mount 203point. It is returned by the open call and is used by all calls except 204the check for whether a given path is a mount point, where it may 205optionally be used to check a specific mount corresponding to a given 206mount point file descriptor, and when requesting the uid and gid of the 207last successful mount on a directory within the autofs file system. 208 209The union is used to communicate parameters and results of calls made 210as described below. 211 212The path field is used to pass a path where it is needed and the size field 213is used account for the increased structure length when translating the 214structure sent from user space. 215 216This structure can be initialized before setting specific fields by using 217the void function call init_autofs_dev_ioctl(``struct autofs_dev_ioctl *``). 218 219All of the ioctls perform a copy of this structure from user space to 220kernel space and return -EINVAL if the size parameter is smaller than 221the structure size itself, -ENOMEM if the kernel memory allocation fails 222or -EFAULT if the copy itself fails. Other checks include a version check 223of the compiled in user space version against the module version and a 224mismatch results in a -EINVAL return. If the size field is greater than 225the structure size then a path is assumed to be present and is checked to 226ensure it begins with a "/" and is NULL terminated, otherwise -EINVAL is 227returned. Following these checks, for all ioctl commands except 228AUTOFS_DEV_IOCTL_VERSION_CMD, AUTOFS_DEV_IOCTL_OPENMOUNT_CMD and 229AUTOFS_DEV_IOCTL_CLOSEMOUNT_CMD the ioctlfd is validated and if it is 230not a valid descriptor or doesn't correspond to an autofs mount point 231an error of -EBADF, -ENOTTY or -EINVAL (not an autofs descriptor) is 232returned. 233 234 235The ioctls 236========== 237 238An example of an implementation which uses this interface can be seen 239in autofs version 5.0.4 and later in file lib/dev-ioctl-lib.c of the 240distribution tar available for download from kernel.org in directory 241/pub/linux/daemons/autofs/v5. 242 243The device node ioctl operations implemented by this interface are: 244 245 246AUTOFS_DEV_IOCTL_VERSION 247------------------------ 248 249Get the major and minor version of the autofs device ioctl kernel module 250implementation. It requires an initialized struct autofs_dev_ioctl as an 251input parameter and sets the version information in the passed in structure. 252It returns 0 on success or the error -EINVAL if a version mismatch is 253detected. 254 255 256AUTOFS_DEV_IOCTL_PROTOVER_CMD and AUTOFS_DEV_IOCTL_PROTOSUBVER_CMD 257------------------------------------------------------------------ 258 259Get the major and minor version of the autofs protocol version understood 260by loaded module. This call requires an initialized struct autofs_dev_ioctl 261with the ioctlfd field set to a valid autofs mount point descriptor 262and sets the requested version number in version field of struct args_protover 263or sub_version field of struct args_protosubver. These commands return 2640 on success or one of the negative error codes if validation fails. 265 266 267AUTOFS_DEV_IOCTL_OPENMOUNT and AUTOFS_DEV_IOCTL_CLOSEMOUNT 268---------------------------------------------------------- 269 270Obtain and release a file descriptor for an autofs managed mount point 271path. The open call requires an initialized struct autofs_dev_ioctl with 272the path field set and the size field adjusted appropriately as well 273as the devid field of struct args_openmount set to the device number of 274the autofs mount. The device number can be obtained from the mount options 275shown in /proc/mounts. The close call requires an initialized struct 276autofs_dev_ioct with the ioctlfd field set to the descriptor obtained 277from the open call. The release of the file descriptor can also be done 278with close(2) so any open descriptors will also be closed at process exit. 279The close call is included in the implemented operations largely for 280completeness and to provide for a consistent user space implementation. 281 282 283AUTOFS_DEV_IOCTL_READY_CMD and AUTOFS_DEV_IOCTL_FAIL_CMD 284-------------------------------------------------------- 285 286Return mount and expire result status from user space to the kernel. 287Both of these calls require an initialized struct autofs_dev_ioctl 288with the ioctlfd field set to the descriptor obtained from the open 289call and the token field of struct args_ready or struct args_fail set 290to the wait queue token number, received by user space in the foregoing 291mount or expire request. The status field of struct args_fail is set to 292the errno of the operation. It is set to 0 on success. 293 294 295AUTOFS_DEV_IOCTL_SETPIPEFD_CMD 296------------------------------ 297 298Set the pipe file descriptor used for kernel communication to the daemon. 299Normally this is set at mount time using an option but when reconnecting 300to a existing mount we need to use this to tell the autofs mount about 301the new kernel pipe descriptor. In order to protect mounts against 302incorrectly setting the pipe descriptor we also require that the autofs 303mount be catatonic (see next call). 304 305The call requires an initialized struct autofs_dev_ioctl with the 306ioctlfd field set to the descriptor obtained from the open call and 307the pipefd field of struct args_setpipefd set to descriptor of the pipe. 308On success the call also sets the process group id used to identify the 309controlling process (eg. the owning automount(8) daemon) to the process 310group of the caller. 311 312 313AUTOFS_DEV_IOCTL_CATATONIC_CMD 314------------------------------ 315 316Make the autofs mount point catatonic. The autofs mount will no longer 317issue mount requests, the kernel communication pipe descriptor is released 318and any remaining waits in the queue released. 319 320The call requires an initialized struct autofs_dev_ioctl with the 321ioctlfd field set to the descriptor obtained from the open call. 322 323 324AUTOFS_DEV_IOCTL_TIMEOUT_CMD 325---------------------------- 326 327Set the expire timeout for mounts within an autofs mount point. 328 329The call requires an initialized struct autofs_dev_ioctl with the 330ioctlfd field set to the descriptor obtained from the open call. 331 332 333AUTOFS_DEV_IOCTL_REQUESTER_CMD 334------------------------------ 335 336Return the uid and gid of the last process to successfully trigger a the 337mount on the given path dentry. 338 339The call requires an initialized struct autofs_dev_ioctl with the path 340field set to the mount point in question and the size field adjusted 341appropriately. Upon return the uid field of struct args_requester contains 342the uid and gid field the gid. 343 344When reconstructing an autofs mount tree with active mounts we need to 345re-connect to mounts that may have used the original process uid and 346gid (or string variations of them) for mount lookups within the map entry. 347This call provides the ability to obtain this uid and gid so they may be 348used by user space for the mount map lookups. 349 350 351AUTOFS_DEV_IOCTL_EXPIRE_CMD 352--------------------------- 353 354Issue an expire request to the kernel for an autofs mount. Typically 355this ioctl is called until no further expire candidates are found. 356 357The call requires an initialized struct autofs_dev_ioctl with the 358ioctlfd field set to the descriptor obtained from the open call. In 359addition an immediate expire that's independent of the mount timeout, 360and a forced expire that's independent of whether the mount is busy, 361can be requested by setting the how field of struct args_expire to 362AUTOFS_EXP_IMMEDIATE or AUTOFS_EXP_FORCED, respectively . If no 363expire candidates can be found the ioctl returns -1 with errno set to 364EAGAIN. 365 366This call causes the kernel module to check the mount corresponding 367to the given ioctlfd for mounts that can be expired, issues an expire 368request back to the daemon and waits for completion. 369 370AUTOFS_DEV_IOCTL_ASKUMOUNT_CMD 371------------------------------ 372 373Checks if an autofs mount point is in use. 374 375The call requires an initialized struct autofs_dev_ioctl with the 376ioctlfd field set to the descriptor obtained from the open call and 377it returns the result in the may_umount field of struct args_askumount, 3781 for busy and 0 otherwise. 379 380 381AUTOFS_DEV_IOCTL_ISMOUNTPOINT_CMD 382--------------------------------- 383 384Check if the given path is a mountpoint. 385 386The call requires an initialized struct autofs_dev_ioctl. There are two 387possible variations. Both use the path field set to the path of the mount 388point to check and the size field adjusted appropriately. One uses the 389ioctlfd field to identify a specific mount point to check while the other 390variation uses the path and optionally in.type field of struct args_ismountpoint 391set to an autofs mount type. The call returns 1 if this is a mount point 392and sets out.devid field to the device number of the mount and out.magic 393field to the relevant super block magic number (described below) or 0 if 394it isn't a mountpoint. In both cases the device number (as returned 395by new_encode_dev()) is returned in out.devid field. 396 397If supplied with a file descriptor we're looking for a specific mount, 398not necessarily at the top of the mounted stack. In this case the path 399the descriptor corresponds to is considered a mountpoint if it is itself 400a mountpoint or contains a mount, such as a multi-mount without a root 401mount. In this case we return 1 if the descriptor corresponds to a mount 402point and also returns the super magic of the covering mount if there 403is one or 0 if it isn't a mountpoint. 404 405If a path is supplied (and the ioctlfd field is set to -1) then the path 406is looked up and is checked to see if it is the root of a mount. If a 407type is also given we are looking for a particular autofs mount and if 408a match isn't found a fail is returned. If the located path is the 409root of a mount 1 is returned along with the super magic of the mount 410or 0 otherwise. 411