1====================== 2ioctl based interfaces 3====================== 4 5ioctl() is the most common way for applications to interface 6with device drivers. It is flexible and easily extended by adding new 7commands and can be passed through character devices, block devices as 8well as sockets and other special file descriptors. 9 10However, it is also very easy to get ioctl command definitions wrong, 11and hard to fix them later without breaking existing applications, 12so this documentation tries to help developers get it right. 13 14Command number definitions 15========================== 16 17The command number, or request number, is the second argument passed to 18the ioctl system call. While this can be any 32-bit number that uniquely 19identifies an action for a particular driver, there are a number of 20conventions around defining them. 21 22``include/uapi/asm-generic/ioctl.h`` provides four macros for defining 23ioctl commands that follow modern conventions: ``_IO``, ``_IOR``, 24``_IOW``, and ``_IOWR``. These should be used for all new commands, 25with the correct parameters: 26 27_IO/_IOR/_IOW/_IOWR 28 The macro name specifies how the argument will be used. It may be a 29 pointer to data to be passed into the kernel (_IOW), out of the kernel 30 (_IOR), or both (_IOWR). _IO can indicate either commands with no 31 argument or those passing an integer value instead of a pointer. 32 It is recommended to only use _IO for commands without arguments, 33 and use pointers for passing data. 34 35type 36 An 8-bit number, often a character literal, specific to a subsystem 37 or driver, and listed in :doc:`../userspace-api/ioctl/ioctl-number` 38 39nr 40 An 8-bit number identifying the specific command, unique for a give 41 value of 'type' 42 43data_type 44 The name of the data type pointed to by the argument, the command number 45 encodes the ``sizeof(data_type)`` value in a 13-bit or 14-bit integer, 46 leading to a limit of 8191 bytes for the maximum size of the argument. 47 Note: do not pass sizeof(data_type) type into _IOR/_IOW/IOWR, as that 48 will lead to encoding sizeof(sizeof(data_type)), i.e. sizeof(size_t). 49 _IO does not have a data_type parameter. 50 51 52Interface versions 53================== 54 55Some subsystems use version numbers in data structures to overload 56commands with different interpretations of the argument. 57 58This is generally a bad idea, since changes to existing commands tend 59to break existing applications. 60 61A better approach is to add a new ioctl command with a new number. The 62old command still needs to be implemented in the kernel for compatibility, 63but this can be a wrapper around the new implementation. 64 65Return code 66=========== 67 68ioctl commands can return negative error codes as documented in errno(3); 69these get turned into errno values in user space. On success, the return 70code should be zero. It is also possible but not recommended to return 71a positive 'long' value. 72 73When the ioctl callback is called with an unknown command number, the 74handler returns either -ENOTTY or -ENOIOCTLCMD, which also results in 75-ENOTTY being returned from the system call. Some subsystems return 76-ENOSYS or -EINVAL here for historic reasons, but this is wrong. 77 78Prior to Linux 5.5, compat_ioctl handlers were required to return 79-ENOIOCTLCMD in order to use the fallback conversion into native 80commands. As all subsystems are now responsible for handling compat 81mode themselves, this is no longer needed, but it may be important to 82consider when backporting bug fixes to older kernels. 83 84Timestamps 85========== 86 87Traditionally, timestamps and timeout values are passed as ``struct 88timespec`` or ``struct timeval``, but these are problematic because of 89incompatible definitions of these structures in user space after the 90move to 64-bit time_t. 91 92The ``struct __kernel_timespec`` type can be used instead to be embedded 93in other data structures when separate second/nanosecond values are 94desired, or passed to user space directly. This is still not ideal though, 95as the structure matches neither the kernel's timespec64 nor the user 96space timespec exactly. The get_timespec64() and put_timespec64() helper 97functions can be used to ensure that the layout remains compatible with 98user space and the padding is treated correctly. 99 100As it is cheap to convert seconds to nanoseconds, but the opposite 101requires an expensive 64-bit division, a simple __u64 nanosecond value 102can be simpler and more efficient. 103 104Timeout values and timestamps should ideally use CLOCK_MONOTONIC time, 105as returned by ktime_get_ns() or ktime_get_ts64(). Unlike 106CLOCK_REALTIME, this makes the timestamps immune from jumping backwards 107or forwards due to leap second adjustments and clock_settime() calls. 108 109ktime_get_real_ns() can be used for CLOCK_REALTIME timestamps that 110need to be persistent across a reboot or between multiple machines. 111 11232-bit compat mode 113================== 114 115In order to support 32-bit user space running on a 64-bit machine, each 116subsystem or driver that implements an ioctl callback handler must also 117implement the corresponding compat_ioctl handler. 118 119As long as all the rules for data structures are followed, this is as 120easy as setting the .compat_ioctl pointer to a helper function such as 121compat_ptr_ioctl() or blkdev_compat_ptr_ioctl(). 122 123compat_ptr() 124------------ 125 126On the s390 architecture, 31-bit user space has ambiguous representations 127for data pointers, with the upper bit being ignored. When running such 128a process in compat mode, the compat_ptr() helper must be used to 129clear the upper bit of a compat_uptr_t and turn it into a valid 64-bit 130pointer. On other architectures, this macro only performs a cast to a 131``void __user *`` pointer. 132 133In an compat_ioctl() callback, the last argument is an unsigned long, 134which can be interpreted as either a pointer or a scalar depending on 135the command. If it is a scalar, then compat_ptr() must not be used, to 136ensure that the 64-bit kernel behaves the same way as a 32-bit kernel 137for arguments with the upper bit set. 138 139The compat_ptr_ioctl() helper can be used in place of a custom 140compat_ioctl file operation for drivers that only take arguments that 141are pointers to compatible data structures. 142 143Structure layout 144---------------- 145 146Compatible data structures have the same layout on all architectures, 147avoiding all problematic members: 148 149* ``long`` and ``unsigned long`` are the size of a register, so 150 they can be either 32-bit or 64-bit wide and cannot be used in portable 151 data structures. Fixed-length replacements are ``__s32``, ``__u32``, 152 ``__s64`` and ``__u64``. 153 154* Pointers have the same problem, in addition to requiring the 155 use of compat_ptr(). The best workaround is to use ``__u64`` 156 in place of pointers, which requires a cast to ``uintptr_t`` in user 157 space, and the use of u64_to_user_ptr() in the kernel to convert 158 it back into a user pointer. 159 160* On the x86-32 (i386) architecture, the alignment of 64-bit variables 161 is only 32-bit, but they are naturally aligned on most other 162 architectures including x86-64. This means a structure like:: 163 164 struct foo { 165 __u32 a; 166 __u64 b; 167 __u32 c; 168 }; 169 170 has four bytes of padding between a and b on x86-64, plus another four 171 bytes of padding at the end, but no padding on i386, and it needs a 172 compat_ioctl conversion handler to translate between the two formats. 173 174 To avoid this problem, all structures should have their members 175 naturally aligned, or explicit reserved fields added in place of the 176 implicit padding. The ``pahole`` tool can be used for checking the 177 alignment. 178 179* On ARM OABI user space, structures are padded to multiples of 32-bit, 180 making some structs incompatible with modern EABI kernels if they 181 do not end on a 32-bit boundary. 182 183* On the m68k architecture, struct members are not guaranteed to have an 184 alignment greater than 16-bit, which is a problem when relying on 185 implicit padding. 186 187* Bitfields and enums generally work as one would expect them to, 188 but some properties of them are implementation-defined, so it is better 189 to avoid them completely in ioctl interfaces. 190 191* ``char`` members can be either signed or unsigned, depending on 192 the architecture, so the __u8 and __s8 types should be used for 8-bit 193 integer values, though char arrays are clearer for fixed-length strings. 194 195Information leaks 196================= 197 198Uninitialized data must not be copied back to user space, as this can 199cause an information leak, which can be used to defeat kernel address 200space layout randomization (KASLR), helping in an attack. 201 202For this reason (and for compat support) it is best to avoid any 203implicit padding in data structures. Where there is implicit padding 204in an existing structure, kernel drivers must be careful to fully 205initialize an instance of the structure before copying it to user 206space. This is usually done by calling memset() before assigning to 207individual members. 208 209Subsystem abstractions 210====================== 211 212While some device drivers implement their own ioctl function, most 213subsystems implement the same command for multiple drivers. Ideally the 214subsystem has an .ioctl() handler that copies the arguments from and 215to user space, passing them into subsystem specific callback functions 216through normal kernel pointers. 217 218This helps in various ways: 219 220* Applications written for one driver are more likely to work for 221 another one in the same subsystem if there are no subtle differences 222 in the user space ABI. 223 224* The complexity of user space access and data structure layout is done 225 in one place, reducing the potential for implementation bugs. 226 227* It is more likely to be reviewed by experienced developers 228 that can spot problems in the interface when the ioctl is shared 229 between multiple drivers than when it is only used in a single driver. 230 231Alternatives to ioctl 232===================== 233 234There are many cases in which ioctl is not the best solution for a 235problem. Alternatives include: 236 237* System calls are a better choice for a system-wide feature that 238 is not tied to a physical device or constrained by the file system 239 permissions of a character device node 240 241* netlink is the preferred way of configuring any network related 242 objects through sockets. 243 244* debugfs is used for ad-hoc interfaces for debugging functionality 245 that does not need to be exposed as a stable interface to applications. 246 247* sysfs is a good way to expose the state of an in-kernel object 248 that is not tied to a file descriptor. 249 250* configfs can be used for more complex configuration than sysfs 251 252* A custom file system can provide extra flexibility with a simple 253 user interface but adds a lot of complexity to the implementation. 254