xref: /linux/Documentation/devicetree/bindings/watchdog/ti,rti-wdt.yaml (revision c532de5a67a70f8533d495f8f2aaa9a0491c3ad0) 
1# SPDX-License-Identifier: (GPL-2.0-only OR BSD-2-Clause)
2%YAML 1.2
3---
4$id: http://devicetree.org/schemas/watchdog/ti,rti-wdt.yaml#
5$schema: http://devicetree.org/meta-schemas/core.yaml#
6
7title: Texas Instruments K3 SoC Watchdog Timer
8
9maintainers:
10  - Tero Kristo <t-kristo@ti.com>
11
12description:
13  The TI K3 SoC watchdog timer is implemented via the RTI (Real Time
14  Interrupt) IP module. This timer adds a support for windowed watchdog
15  mode, which will signal an error if it is pinged outside the watchdog
16  time window, meaning either too early or too late. The error signal
17  generated can be routed to either interrupt a safety controller or
18  to directly reset the SoC.
19
20allOf:
21  - $ref: watchdog.yaml#
22
23properties:
24  compatible:
25    enum:
26      - ti,j7-rti-wdt
27
28  reg:
29    maxItems: 1
30
31  clocks:
32    maxItems: 1
33
34  power-domains:
35    maxItems: 1
36
37  memory-region:
38    maxItems: 1
39    description:
40      Contains the watchdog reserved memory. It is optional.
41      In the reserved memory, the specified values, which are
42      PON_REASON_SOF_NUM(0xBBBBCCCC), PON_REASON_MAGIC_NUM(0xDDDDDDDD),
43      and PON_REASON_EOF_NUM(0xCCCCBBBB), are pre-stored at the first
44      3 * 4 bytes to tell that last boot was caused by watchdog reset.
45      Once the PON reason is captured by driver(rti_wdt.c), the driver
46      is supposed to wipe the whole memory region. Surely, if this
47      property is set, at least 12 bytes reserved memory starting from
48      specific memory address(0xa220000) should be set. More please
49      refer to example.
50
51required:
52  - compatible
53  - reg
54  - clocks
55  - power-domains
56
57unevaluatedProperties: false
58
59examples:
60  - |
61    /*
62     * RTI WDT in main domain on J721e SoC. Assigned clocks are used to
63     * select the source clock for the watchdog, forcing it to tick with
64     * a 32kHz clock in this case. Add a reserved memory(optional) to keep
65     * the watchdog reset cause persistent, which was be written in 12 bytes
66     * starting from 0xa2200000 by RTI Watchdog Firmware, then make it
67     * possible to get watchdog reset cause in driver.
68     *
69     * Reserved memory should be defined as follows:
70     * reserved-memory {
71     *     wdt_reset_memory_region: wdt-memory@a2200000 {
72     *         reg = <0x00 0xa2200000 0x00 0x1000>;
73     *         no-map;
74     *     };
75     * }
76     */
77    #include <dt-bindings/soc/ti,sci_pm_domain.h>
78
79    watchdog@2200000 {
80        compatible = "ti,j7-rti-wdt";
81        reg = <0x2200000 0x100>;
82        clocks = <&k3_clks 252 1>;
83        power-domains = <&k3_pds 252 TI_SCI_PD_EXCLUSIVE>;
84        assigned-clocks = <&k3_clks 252 1>;
85        assigned-clock-parents = <&k3_clks 252 5>;
86        memory-region = <&wdt_reset_memory_region>;
87    };
88