1# SPDX-License-Identifier: (GPL-2.0-only OR BSD-2-Clause) 2%YAML 1.2 3--- 4$id: "http://devicetree.org/schemas/usb/richtek,rt1711h.yaml#" 5$schema: "http://devicetree.org/meta-schemas/core.yaml#" 6 7title: Richtek RT1711H Type-C Port Switch and Power Delivery controller 8 9maintainers: 10 - Gene Chen <gene_chen@richtek.com> 11 12description: | 13 The RT1711H is a USB Type-C controller that complies with the latest 14 USB Type-C and PD standards. It does the USB Type-C detection including attach 15 and orientation. It integrates the physical layer of the USB BMC power 16 delivery protocol to allow up to 100W of power. The BMC PD block enables full 17 support for alternative interfaces of the Type-C specification. 18 19properties: 20 compatible: 21 enum: 22 - richtek,rt1711h 23 - richtek,rt1715 24 description: 25 RT1711H support PD20, RT1715 support PD30 except Fast Role Swap. 26 27 reg: 28 maxItems: 1 29 30 interrupts: 31 maxItems: 1 32 33 wakeup-source: 34 type: boolean 35 36 connector: 37 type: object 38 $ref: /schemas/connector/usb-connector.yaml# 39 description: 40 Properties for usb c connector. 41 42additionalProperties: false 43 44required: 45 - compatible 46 - reg 47 - connector 48 - interrupts 49 50examples: 51 - | 52 #include <dt-bindings/interrupt-controller/irq.h> 53 #include <dt-bindings/usb/pd.h> 54 i2c0 { 55 #address-cells = <1>; 56 #size-cells = <0>; 57 58 rt1711h@4e { 59 compatible = "richtek,rt1711h"; 60 reg = <0x4e>; 61 interrupts-extended = <&gpio26 3 IRQ_TYPE_LEVEL_LOW>; 62 wakeup-source; 63 64 connector { 65 compatible = "usb-c-connector"; 66 label = "USB-C"; 67 data-role = "dual"; 68 power-role = "dual"; 69 try-power-role = "sink"; 70 source-pdos = <PDO_FIXED(5000, 2000, PDO_FIXED_DUAL_ROLE | PDO_FIXED_DATA_SWAP)>; 71 sink-pdos = <PDO_FIXED(5000, 2000, PDO_FIXED_DUAL_ROLE | PDO_FIXED_DATA_SWAP)>; 72 op-sink-microwatt = <10000000>; 73 74 ports { 75 #address-cells = <1>; 76 #size-cells = <0>; 77 78 port@0 { 79 reg = <0>; 80 endpoint { 81 remote-endpoint = <&usb_hs>; 82 }; 83 }; 84 port@1 { 85 reg = <1>; 86 endpoint { 87 remote-endpoint = <&usb_ss>; 88 }; 89 }; 90 port@2 { 91 reg = <2>; 92 endpoint { 93 remote-endpoint = <&dp_aux>; 94 }; 95 }; 96 }; 97 }; 98 }; 99 }; 100... 101